| Message ID | 20210823032800.1660-7-chuanjia.liu@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PCI: mediatek: Spilt PCIe node to comply with hardware design | expand |
On 23/08/2021 05:28, Chuanjia Liu wrote: > To match the new dts binding. Remove "subsys",unused > interrupt and slot node.Add "interrupt-names", > "linux,pci-domain" and pciecfg node. > > Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com> > Acked-by: Ryder Lee <ryder.lee@mediatek.com> Queued in v5.15-next/dts32 Thanks! > --- > arch/arm/boot/dts/mt7629-rfb.dts | 3 ++- > arch/arm/boot/dts/mt7629.dtsi | 45 +++++++++++++++----------------- > 2 files changed, 23 insertions(+), 25 deletions(-) > > diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts > index 9980c10c6e29..eb536cbebd9b 100644 > --- a/arch/arm/boot/dts/mt7629-rfb.dts > +++ b/arch/arm/boot/dts/mt7629-rfb.dts > @@ -140,9 +140,10 @@ > }; > }; > > -&pcie { > +&pcie1 { > pinctrl-names = "default"; > pinctrl-0 = <&pcie_pins>; > + status = "okay"; > }; > > &pciephy1 { > diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi > index 874043f0490d..46fc236e1b89 100644 > --- a/arch/arm/boot/dts/mt7629.dtsi > +++ b/arch/arm/boot/dts/mt7629.dtsi > @@ -361,16 +361,21 @@ > #reset-cells = <1>; > }; > > - pcie: pcie@1a140000 { > + pciecfg: pciecfg@1a140000 { > + compatible = "mediatek,generic-pciecfg", "syscon"; > + reg = <0x1a140000 0x1000>; > + }; > + > + pcie1: pcie@1a145000 { > compatible = "mediatek,mt7629-pcie"; > device_type = "pci"; > - reg = <0x1a140000 0x1000>, > - <0x1a145000 0x1000>; > - reg-names = "subsys","port1"; > + reg = <0x1a145000 0x1000>; > + reg-names = "port1"; > + linux,pci-domain = <1>; > #address-cells = <3>; > #size-cells = <2>; > - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>, > - <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; > + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; > + interrupt-names = "pcie_irq"; > clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, > <&pciesys CLK_PCIE_P0_AHB_EN>, > <&pciesys CLK_PCIE_P1_AUX_EN>, > @@ -391,26 +396,18 @@ > power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; > bus-range = <0x00 0xff>; > ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>; > + status = "disabled"; > > - pcie1: pcie@1,0 { > - device_type = "pci"; > - reg = <0x0800 0 0 0 0>; > - #address-cells = <3>; > - #size-cells = <2>; > + #interrupt-cells = <1>; > + interrupt-map-mask = <0 0 0 7>; > + interrupt-map = <0 0 0 1 &pcie_intc1 0>, > + <0 0 0 2 &pcie_intc1 1>, > + <0 0 0 3 &pcie_intc1 2>, > + <0 0 0 4 &pcie_intc1 3>; > + pcie_intc1: interrupt-controller { > + interrupt-controller; > + #address-cells = <0>; > #interrupt-cells = <1>; > - ranges; > - num-lanes = <1>; > - interrupt-map-mask = <0 0 0 7>; > - interrupt-map = <0 0 0 1 &pcie_intc1 0>, > - <0 0 0 2 &pcie_intc1 1>, > - <0 0 0 3 &pcie_intc1 2>, > - <0 0 0 4 &pcie_intc1 3>; > - > - pcie_intc1: interrupt-controller { > - interrupt-controller; > - #address-cells = <0>; > - #interrupt-cells = <1>; > - }; > }; > }; > >
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts index 9980c10c6e29..eb536cbebd9b 100644 --- a/arch/arm/boot/dts/mt7629-rfb.dts +++ b/arch/arm/boot/dts/mt7629-rfb.dts @@ -140,9 +140,10 @@ }; }; -&pcie { +&pcie1 { pinctrl-names = "default"; pinctrl-0 = <&pcie_pins>; + status = "okay"; }; &pciephy1 { diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi index 874043f0490d..46fc236e1b89 100644 --- a/arch/arm/boot/dts/mt7629.dtsi +++ b/arch/arm/boot/dts/mt7629.dtsi @@ -361,16 +361,21 @@ #reset-cells = <1>; }; - pcie: pcie@1a140000 { + pciecfg: pciecfg@1a140000 { + compatible = "mediatek,generic-pciecfg", "syscon"; + reg = <0x1a140000 0x1000>; + }; + + pcie1: pcie@1a145000 { compatible = "mediatek,mt7629-pcie"; device_type = "pci"; - reg = <0x1a140000 0x1000>, - <0x1a145000 0x1000>; - reg-names = "subsys","port1"; + reg = <0x1a145000 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; #address-cells = <3>; #size-cells = <2>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "pcie_irq"; clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, <&pciesys CLK_PCIE_P0_AHB_EN>, <&pciesys CLK_PCIE_P1_AUX_EN>, @@ -391,26 +396,18 @@ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; bus-range = <0x00 0xff>; ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>; + status = "disabled"; - pcie1: pcie@1,0 { - device_type = "pci"; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - num-lanes = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; };