From patchwork Fri Oct 22 12:40:33 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?U2FtIFNoaWggKOWPsueiqeS4iSk=?= X-Patchwork-Id: 12577719 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C0E15C433FE for ; Fri, 22 Oct 2021 12:54:31 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 784B1610A4 for ; Fri, 22 Oct 2021 12:54:31 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org 784B1610A4 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=mediatek.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=sQca6/WEMeiynl9IzeeEhGKJ7fAa3l9VAiX6huKufYQ=; b=v1MuXnDjhV0Y9q NClMzZOZrAj0DLpEdNTwzc6sdTk+uDwhOVu6xqphKwE8ooofUE/qvYyRax4YEIgahBZ8CLGa43Mf4 sWhhj+I2sWsUJm+JxGSquVaFGtmVvdUqH3LT5FPJMxuTrt8CadmyDOeud8hORo/CcZkLwxJBKwQWg uNZzMbyEq39mwhEaPzAvGPb7mQb4015H+2ViXCvipkiGC00Oi9tO6E+fFC8YKZWHVm1IFe9/XUUsM bOCtOKV8Mor+A4XXFvMDm9jE6scq3EiexAKqNlytbsu2R/6Mb2M7DtEUH2xGWdK6xPsS0Z7vKfPxa t+BxB+isqs8blOGw/mAQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mdu3t-00AySN-I6; Fri, 22 Oct 2021 12:54:17 +0000 Received: from mailgw01.mediatek.com ([216.200.240.184]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mdu0b-00AxaA-Md; Fri, 22 Oct 2021 12:50:56 +0000 X-UUID: 3c83bad5544b47faa2338c1deb13f114-20211022 X-UUID: 3c83bad5544b47faa2338c1deb13f114-20211022 Received: from mtkcas66.mediatek.inc [(172.29.193.44)] by mailgw01.mediatek.com (envelope-from ) (musrelay.mediatek.com ESMTP with TLSv1.2 ECDHE-RSA-AES256-SHA384 256/256) with ESMTP id 1779275399; Fri, 22 Oct 2021 05:50:49 -0700 Received: from mtkmbs10n2.mediatek.inc (172.21.101.183) by MTKMBS62DR.mediatek.inc (172.29.94.18) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Fri, 22 Oct 2021 05:40:46 -0700 Received: from mtkcas10.mediatek.inc (172.21.101.39) by mtkmbs10n2.mediatek.inc (172.21.101.183) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384) id 15.2.792.3; Fri, 22 Oct 2021 20:40:45 +0800 Received: from mtksdccf07.mediatek.inc (172.21.84.99) by mtkcas10.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Fri, 22 Oct 2021 20:40:44 +0800 From: Sam Shih To: Linus Walleij , Rob Herring , Matthias Brugger , Sean Wang , , , , , CC: John Crispin , Ryder Lee , "Sam Shih" Subject: [PATCH v9 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC Date: Fri, 22 Oct 2021 20:40:33 +0800 Message-ID: <20211022124036.5291-2-sam.shih@mediatek.com> X-Mailer: git-send-email 2.18.0 In-Reply-To: <20211022124036.5291-1-sam.shih@mediatek.com> References: <20211022124036.5291-1-sam.shih@mediatek.com> MIME-Version: 1.0 X-MTK: N X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211022_055053_838920_72F867DC X-CRM114-Status: GOOD ( 17.12 ) X-BeenThere: linux-mediatek@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-mediatek" Errors-To: linux-mediatek-bounces+linux-mediatek=archiver.kernel.org@lists.infradead.org This updates bindings for MT7986 pinctrl driver. The difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65 do not exist on mt7986b Signed-off-by: Sam Shih Reviewed-by: Rob Herring --- v9: added an Reviewed-by tag v8: fixed uart node in yaml dts example v7: updated pinctcl node binding description, and separate pinctrl part into a single patch series Original thread: https://lore.kernel.org/all/8348ed3e-c561-ad7e-fe9e-a31ed346d8d0@gmail.com/ v6: fixed yamllint warnings/errors v2 v5: fixed yamllint warnings/errors v1 v4: used yaml format instead of txt format document v3: make mt7986 pinctrl bindings as a separate file v2: deleted the redundant description of mt7986a/mt7986b --- .../pinctrl/mediatek,mt7986-pinctrl.yaml | 363 ++++++++++++++++++ 1 file changed, 363 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml new file mode 100644 index 000000000000..7602b11e8bce --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml @@ -0,0 +1,363 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT7986 Pin Controller Device Tree Bindings + +maintainers: + - Sean Wang + +description: |+ + The MediaTek's MT7986 Pin controller is used to control SoC pins. + +properties: + compatible: + enum: + - mediatek,mt7986a-pinctrl + - mediatek,mt7986b-pinctrl + + reg: + minItems: 8 + maxItems: 8 + + reg-names: + items: + - const: gpio + - const: iocfg_rt + - const: iocfg_rb + - const: iocfg_lt + - const: iocfg_lb + - const: iocfg_tr + - const: iocfg_tl + - const: eint + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + Number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + + gpio-ranges: + minItems: 1 + maxItems: 5 + description: | + GPIO valid number range. + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +required: + - compatible + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '.*mux.*': + type: object + additionalProperties: false + description: | + pinmux configuration nodes. + + The following table shows the effective values of "group", "function" + properties and chip pinout pins + + groups function pins (in pin#) + --------------------------------------------------------------------- + "watchdog" "watchdog" 0 + "wifi_led" "led" 1, 2 + "i2c" "i2c" 3, 4 + "uart1_0" "uart" 7, 8, 9, 10 + "pcie_clk" "pcie" 9 + "pcie_wake" "pcie" 10 + "spi1_0" "spi" 11, 12, 13, 14 + "pwm1_1" "pwm" 20, + "pwm0" "pwm" 21, + "pwm1_0" "pwm" 22, + "snfi" "flash" 23, 24, 25, 26, 27, 28 + "spi1_2" "spi" 29, 30, 31, 32 + "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30, + 31, 32 + "spi1_1" "spi" 23, 24, 25, 26 + "uart1_2" "uart" 29, 30, 31, 32 + "uart1_1" "uart" 23, 24, 25, 26 + "uart2_0" "uart" 29, 30, 31, 32 + "spi0" "spi" 33, 34, 35, 36 + "spi0_wp_hold" "spi" 37, 38 + "uart1_3_rx_tx" "uart" 35, 36 + "uart1_3_cts_rts" "uart" 37, 38 + "uart2_1" "uart" 33, 34, 35, 36 + "spi1_3" "spi" 33, 34, 35, 36 + "uart0" "uart" 39, 40 + "pcie_pereset" "pcie" 41 + "uart1" "uart" 42, 43, 44, 45 + "uart2" "uart" 46, 47, 48, 49 + "emmc_51" "emmc" 50, 51, 52, 53, 54, 55, 56, 57, 57, + 59, 60, 61 + "pcm" "audio" 62, 63, 64, 65 + "i2s" "audio" 62, 63, 64, 65 + "switch_int" "eth" 66 + "mdc_mdio" "eth" 67 + + $ref: "/schemas/pinctrl/pinmux-node.yaml" + properties: + function: + description: | + A string containing the name of the function to mux to the group. + There is no "audio", "pcie" functions on mt7986b, you can only use + those functions on mt7986a. + enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart, + watchdog, wifi] + groups: + description: | + An array of strings. Each string contains the name of a group. + There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm", + and "i2s" groups on mt7986b, you can only use those groups on + mt7986a. + required: + - function + - groups + + allOf: + - if: + properties: + function: + const: audio + then: + properties: + groups: + enum: [pcm, i2s] + - if: + properties: + function: + const: emmc + then: + properties: + groups: + enum: [emmc, emmc_rst] + - if: + properties: + function: + const: eth + then: + properties: + groups: + enum: [switch_int, mdc_mdio] + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + - if: + properties: + function: + const: led + then: + properties: + groups: + enum: [wifi_led] + - if: + properties: + function: + const: flash + then: + properties: + groups: + enum: [snfi] + - if: + properties: + function: + const: pcie + then: + properties: + groups: + enum: [pcie_clk, pcie_wake, pcie_pereset] + - if: + properties: + function: + const: pwm + then: + properties: + groups: + enum: [pwm0, pwm1_0, pwm1_1] + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3] + - if: + properties: + function: + const: uart + then: + properties: + groups: + enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx, + uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2] + - if: + properties: + function: + const: watchdog + then: + properties: + groups: + enum: [watchdog] + - if: + properties: + function: + const: wifi + then: + properties: + groups: + enum: [wf_2g, wf_5g, wf_dbdc] + '.*conf.*': + type: object + additionalProperties: false + description: | + pinconf configuration nodes. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: | + An array of strings. Each string contains the name of a pin. + There is no PIN 41 to PIN 65 above on mt7686b, you can only use + those pins on mt7986a. + enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0, + GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7, + GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14, + GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS, + SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS, + SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, + UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD, + UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS, + UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2, + EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6, + EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX, + PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO, + WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK, + WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0, + WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9, + WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ, + WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3, + WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7, + WF1_HB8] + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-enable: true + + input-disable: true + + output-enable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + mediatek,pull-up-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull up setings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull down setings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + required: + - pins + +additionalProperties: false + +examples: + - | + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + pio: pinctrl@1001f000 { + compatible = "mediatek,mt7986a-pinctrl"; + reg = <0 0x1001f000 0 0x1000>, + <0 0x11c30000 0 0x1000>, + <0 0x11c40000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11e30000 0 0x1000>, + <0 0x11f00000 0 0x1000>, + <0 0x11f10000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt", + "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 100>; + interrupt-controller; + interrupts = ; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + + uart1_pins: uart1-pins { + mux { + function = "uart"; + groups = "uart1"; + }; + }; + + uart2_pins: uart2-pins { + mux { + function = "uart"; + groups = "uart2"; + }; + }; + + }; + };