| Message ID | 20211110193520.488-1-fparent@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RESEND] arm64: dts: mediatek: mt8516: remove 2 invalid i2c clocks | expand |
On 10/11/2021 20:35, Fabien Parent wrote: > The two clocks "main-source" and "main-sel" are not present in the > driver and not defined in the binding documentation. Remove them > as they are not used and not described in the documentation. > > Signed-off-by: Fabien Parent <fparent@baylibre.com> Applied to v5.16-next/dts64 thanks > --- > arch/arm64/boot/dts/mediatek/mt8516.dtsi | 27 ++++++------------------ > 1 file changed, 6 insertions(+), 21 deletions(-) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi > index bbe5a1419eff..d1b67c82d761 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi > +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi > @@ -345,14 +345,9 @@ i2c0: i2c@11009000 { > reg = <0 0x11009000 0 0x90>, > <0 0x11000180 0 0x80>; > interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>; > - clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>, > - <&infracfg CLK_IFR_I2C0_SEL>, > - <&topckgen CLK_TOP_I2C0>, > + clocks = <&topckgen CLK_TOP_I2C0>, > <&topckgen CLK_TOP_APDMA>; > - clock-names = "main-source", > - "main-sel", > - "main", > - "dma"; > + clock-names = "main", "dma"; > #address-cells = <1>; > #size-cells = <0>; > status = "disabled"; > @@ -364,14 +359,9 @@ i2c1: i2c@1100a000 { > reg = <0 0x1100a000 0 0x90>, > <0 0x11000200 0 0x80>; > interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; > - clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>, > - <&infracfg CLK_IFR_I2C1_SEL>, > - <&topckgen CLK_TOP_I2C1>, > + clocks = <&topckgen CLK_TOP_I2C1>, > <&topckgen CLK_TOP_APDMA>; > - clock-names = "main-source", > - "main-sel", > - "main", > - "dma"; > + clock-names = "main", "dma"; > #address-cells = <1>; > #size-cells = <0>; > status = "disabled"; > @@ -383,14 +373,9 @@ i2c2: i2c@1100b000 { > reg = <0 0x1100b000 0 0x90>, > <0 0x11000280 0 0x80>; > interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>; > - clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>, > - <&infracfg CLK_IFR_I2C2_SEL>, > - <&topckgen CLK_TOP_I2C2>, > + clocks = <&topckgen CLK_TOP_I2C2>, > <&topckgen CLK_TOP_APDMA>; > - clock-names = "main-source", > - "main-sel", > - "main", > - "dma"; > + clock-names = "main", "dma"; > #address-cells = <1>; > #size-cells = <0>; > status = "disabled"; >
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi index bbe5a1419eff..d1b67c82d761 100644 --- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi @@ -345,14 +345,9 @@ i2c0: i2c@11009000 { reg = <0 0x11009000 0 0x90>, <0 0x11000180 0 0x80>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>, - <&infracfg CLK_IFR_I2C0_SEL>, - <&topckgen CLK_TOP_I2C0>, + clocks = <&topckgen CLK_TOP_I2C0>, <&topckgen CLK_TOP_APDMA>; - clock-names = "main-source", - "main-sel", - "main", - "dma"; + clock-names = "main", "dma"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -364,14 +359,9 @@ i2c1: i2c@1100a000 { reg = <0 0x1100a000 0 0x90>, <0 0x11000200 0 0x80>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>, - <&infracfg CLK_IFR_I2C1_SEL>, - <&topckgen CLK_TOP_I2C1>, + clocks = <&topckgen CLK_TOP_I2C1>, <&topckgen CLK_TOP_APDMA>; - clock-names = "main-source", - "main-sel", - "main", - "dma"; + clock-names = "main", "dma"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -383,14 +373,9 @@ i2c2: i2c@1100b000 { reg = <0 0x1100b000 0 0x90>, <0 0x11000280 0 0x80>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>, - <&infracfg CLK_IFR_I2C2_SEL>, - <&topckgen CLK_TOP_I2C2>, + clocks = <&topckgen CLK_TOP_I2C2>, <&topckgen CLK_TOP_APDMA>; - clock-names = "main-source", - "main-sel", - "main", - "dma"; + clock-names = "main", "dma"; #address-cells = <1>; #size-cells = <0>; status = "disabled";
The two clocks "main-source" and "main-sel" are not present in the driver and not defined in the binding documentation. Remove them as they are not used and not described in the documentation. Signed-off-by: Fabien Parent <fparent@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8516.dtsi | 27 ++++++------------------ 1 file changed, 6 insertions(+), 21 deletions(-)