| Message ID | 20220121071942.11601-3-axe.yang@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mmc: mediatek: add support for SDIO async IRQ | expand |
On Fri, 21 Jan 2022 at 08:19, Axe Yang <axe.yang@mediatek.com> wrote: > > If cap-sdio-async-irq flag is set in host dts node, parse EAI > information from SDIO CCCR interrupt externsion segment. If async > interrupt is supported by SDIO card then send command to card to > enable it and set enable_async_irq flag in sdio_cccr structure to 1. > The parse flow is implemented in sdio_read_cccr(). > > Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > Signed-off-by: Axe Yang <axe.yang@mediatek.com> > --- > drivers/mmc/core/host.c | 2 ++ > drivers/mmc/core/sdio.c | 17 +++++++++++++++++ > include/linux/mmc/card.h | 3 ++- > include/linux/mmc/host.h | 1 + > include/linux/mmc/sdio.h | 5 +++++ > 5 files changed, 27 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c > index cf140f4ec864..a972241548b4 100644 > --- a/drivers/mmc/core/host.c > +++ b/drivers/mmc/core/host.c > @@ -410,6 +410,8 @@ int mmc_of_parse(struct mmc_host *host) > if (device_property_read_bool(dev, "no-mmc-hs400")) > host->caps2 &= ~(MMC_CAP2_HS400_1_8V | MMC_CAP2_HS400_1_2V | > MMC_CAP2_HS400_ES); > + if (device_property_read_bool(dev, "cap-sdio-async-irq")) > + host->caps2 |= MMC_CAP2_SDIO_ASYNC_IRQ; > > /* Must be after "non-removable" check */ > if (device_property_read_u32(dev, "fixed-emmc-driver-type", &drv_type) == 0) { > diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c > index 41164748723d..771fb5d18585 100644 > --- a/drivers/mmc/core/sdio.c > +++ b/drivers/mmc/core/sdio.c > @@ -225,6 +225,23 @@ static int sdio_read_cccr(struct mmc_card *card, u32 ocr) > card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C; > if (data & SDIO_DRIVE_SDTD) > card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D; > + > + if (card->host->caps2 & MMC_CAP2_SDIO_ASYNC_IRQ) { We can probably check host->pm_caps & MMC_PM_WAKE_SDIO_IRQ here, instead of MMC_CAP2_SDIO_ASYNC_IRQ. > + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTERRUPT_EXT, 0, > + &data); > + if (ret) > + goto out; > + > + if (data & SDIO_INTERRUPT_EXT_SAI) { > + data |= SDIO_INTERRUPT_EXT_EAI; > + ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_INTERRUPT_EXT, > + data, NULL); > + if (ret) > + goto out; > + > + card->cccr.enable_async_irq = 1; As you show in the next patch(3), this flag is useful to read for the host driver. However, rather than accessing this flag directly in the host driver, can you please add a helper function that takes a struct mmc_card* as in-parameter instead? > + } > + } > } > > /* if no uhs mode ensure we check for high speed */ > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h > index 37f975875102..4df9182bc0e6 100644 > --- a/include/linux/mmc/card.h > +++ b/include/linux/mmc/card.h > @@ -219,7 +219,8 @@ struct sdio_cccr { > wide_bus:1, > high_power:1, > high_speed:1, > - disable_cd:1; > + disable_cd:1, > + enable_async_irq:1; > }; > > struct sdio_cis { > diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h > index 7afb57cab00b..502a5418264c 100644 > --- a/include/linux/mmc/host.h > +++ b/include/linux/mmc/host.h > @@ -402,6 +402,7 @@ struct mmc_host { > #define MMC_CAP2_CRYPTO 0 > #endif > #define MMC_CAP2_ALT_GPT_TEGRA (1 << 28) /* Host with eMMC that has GPT entry at a non-standard location */ > +#define MMC_CAP2_SDIO_ASYNC_IRQ (1 << 29) /* SDIO host supports asynchronous interrupt */ > > int fixed_drv_type; /* fixed driver type for non-removable media */ > > diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h > index 2a05d1ac4f0e..1ef400f28642 100644 > --- a/include/linux/mmc/sdio.h > +++ b/include/linux/mmc/sdio.h > @@ -159,6 +159,11 @@ > #define SDIO_DTSx_SET_TYPE_A (1 << SDIO_DRIVE_DTSx_SHIFT) > #define SDIO_DTSx_SET_TYPE_C (2 << SDIO_DRIVE_DTSx_SHIFT) > #define SDIO_DTSx_SET_TYPE_D (3 << SDIO_DRIVE_DTSx_SHIFT) > + > +#define SDIO_CCCR_INTERRUPT_EXT 0x16 > +#define SDIO_INTERRUPT_EXT_SAI (1 << 0) > +#define SDIO_INTERRUPT_EXT_EAI (1 << 1) > + > /* > * Function Basic Registers (FBR) > */ Kind regards Uffe
On Mon, 2022-02-14 at 16:34 +0100, Ulf Hansson wrote: > On Fri, 21 Jan 2022 at 08:19, Axe Yang <axe.yang@mediatek.com> wrote: > > > > If cap-sdio-async-irq flag is set in host dts node, parse EAI > > information from SDIO CCCR interrupt externsion segment. If async > > interrupt is supported by SDIO card then send command to card to > > enable it and set enable_async_irq flag in sdio_cccr structure to > > 1. > > The parse flow is implemented in sdio_read_cccr(). > > > > Acked-by: AngeloGioacchino Del Regno < > > angelogioacchino.delregno@collabora.com> > > Signed-off-by: Axe Yang <axe.yang@mediatek.com> > > --- > > drivers/mmc/core/host.c | 2 ++ > > drivers/mmc/core/sdio.c | 17 +++++++++++++++++ > > include/linux/mmc/card.h | 3 ++- > > include/linux/mmc/host.h | 1 + > > include/linux/mmc/sdio.h | 5 +++++ > > 5 files changed, 27 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c > > index cf140f4ec864..a972241548b4 100644 > > --- a/drivers/mmc/core/host.c > > +++ b/drivers/mmc/core/host.c > > @@ -410,6 +410,8 @@ int mmc_of_parse(struct mmc_host *host) > > if (device_property_read_bool(dev, "no-mmc-hs400")) > > host->caps2 &= ~(MMC_CAP2_HS400_1_8V | > > MMC_CAP2_HS400_1_2V | > > MMC_CAP2_HS400_ES); > > + if (device_property_read_bool(dev, "cap-sdio-async-irq")) > > + host->caps2 |= MMC_CAP2_SDIO_ASYNC_IRQ; > > > > /* Must be after "non-removable" check */ > > if (device_property_read_u32(dev, "fixed-emmc-driver-type", > > &drv_type) == 0) { > > diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c > > index 41164748723d..771fb5d18585 100644 > > --- a/drivers/mmc/core/sdio.c > > +++ b/drivers/mmc/core/sdio.c > > @@ -225,6 +225,23 @@ static int sdio_read_cccr(struct mmc_card > > *card, u32 ocr) > > card->sw_caps.sd3_drv_type |= > > SD_DRIVER_TYPE_C; > > if (data & SDIO_DRIVE_SDTD) > > card->sw_caps.sd3_drv_type |= > > SD_DRIVER_TYPE_D; > > + > > + if (card->host->caps2 & > > MMC_CAP2_SDIO_ASYNC_IRQ) { > > We can probably check host->pm_caps & MMC_PM_WAKE_SDIO_IRQ here, > instead of MMC_CAP2_SDIO_ASYNC_IRQ. Will update this part in next version. > > > + ret = mmc_io_rw_direct(card, 0, 0, > > SDIO_CCCR_INTERRUPT_EXT, 0, > > + &data); > > + if (ret) > > + goto out; > > + > > + if (data & SDIO_INTERRUPT_EXT_SAI) > > { > > + data |= > > SDIO_INTERRUPT_EXT_EAI; > > + ret = > > mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_INTERRUPT_EXT, > > + data > > , NULL); > > + if (ret) > > + goto out; > > + > > + card->cccr.enable_async_irq > > = 1; > > As you show in the next patch(3), this flag is useful to read for the > host driver. > > However, rather than accessing this flag directly in the host driver, > can you please add a helper function that takes a struct mmc_card* as > in-parameter instead? OK. I will do that in next version. > > > + } > > + } > > } > > > > /* if no uhs mode ensure we check for high speed */ > > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h > > index 37f975875102..4df9182bc0e6 100644 > > --- a/include/linux/mmc/card.h > > +++ b/include/linux/mmc/card.h > > @@ -219,7 +219,8 @@ struct sdio_cccr { > > wide_bus:1, > > high_power:1, > > high_speed:1, > > - disable_cd:1; > > + disable_cd:1, > > + enable_async_irq:1; > > }; > > > > struct sdio_cis { > > diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h > > index 7afb57cab00b..502a5418264c 100644 > > --- a/include/linux/mmc/host.h > > +++ b/include/linux/mmc/host.h > > @@ -402,6 +402,7 @@ struct mmc_host { > > #define MMC_CAP2_CRYPTO 0 > > #endif > > #define MMC_CAP2_ALT_GPT_TEGRA (1 << 28) /* Host with eMMC > > that has GPT entry at a non-standard location */ > > +#define MMC_CAP2_SDIO_ASYNC_IRQ (1 << 29) /* SDIO > > host supports asynchronous interrupt */ > > > > int fixed_drv_type; /* fixed driver > > type for non-removable media */ > > > > diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h > > index 2a05d1ac4f0e..1ef400f28642 100644 > > --- a/include/linux/mmc/sdio.h > > +++ b/include/linux/mmc/sdio.h > > @@ -159,6 +159,11 @@ > > #define SDIO_DTSx_SET_TYPE_A (1 << SDIO_DRIVE_DTSx_SHIFT) > > #define SDIO_DTSx_SET_TYPE_C (2 << SDIO_DRIVE_DTSx_SHIFT) > > #define SDIO_DTSx_SET_TYPE_D (3 << SDIO_DRIVE_DTSx_SHIFT) > > + > > +#define SDIO_CCCR_INTERRUPT_EXT 0x16 > > +#define SDIO_INTERRUPT_EXT_SAI (1 << 0) > > +#define SDIO_INTERRUPT_EXT_EAI (1 << 1) > > + > > /* > > * Function Basic Registers (FBR) > > */ > Regards, Axe Yang
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index cf140f4ec864..a972241548b4 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -410,6 +410,8 @@ int mmc_of_parse(struct mmc_host *host) if (device_property_read_bool(dev, "no-mmc-hs400")) host->caps2 &= ~(MMC_CAP2_HS400_1_8V | MMC_CAP2_HS400_1_2V | MMC_CAP2_HS400_ES); + if (device_property_read_bool(dev, "cap-sdio-async-irq")) + host->caps2 |= MMC_CAP2_SDIO_ASYNC_IRQ; /* Must be after "non-removable" check */ if (device_property_read_u32(dev, "fixed-emmc-driver-type", &drv_type) == 0) { diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 41164748723d..771fb5d18585 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -225,6 +225,23 @@ static int sdio_read_cccr(struct mmc_card *card, u32 ocr) card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C; if (data & SDIO_DRIVE_SDTD) card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D; + + if (card->host->caps2 & MMC_CAP2_SDIO_ASYNC_IRQ) { + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTERRUPT_EXT, 0, + &data); + if (ret) + goto out; + + if (data & SDIO_INTERRUPT_EXT_SAI) { + data |= SDIO_INTERRUPT_EXT_EAI; + ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_INTERRUPT_EXT, + data, NULL); + if (ret) + goto out; + + card->cccr.enable_async_irq = 1; + } + } } /* if no uhs mode ensure we check for high speed */ diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 37f975875102..4df9182bc0e6 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -219,7 +219,8 @@ struct sdio_cccr { wide_bus:1, high_power:1, high_speed:1, - disable_cd:1; + disable_cd:1, + enable_async_irq:1; }; struct sdio_cis { diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 7afb57cab00b..502a5418264c 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -402,6 +402,7 @@ struct mmc_host { #define MMC_CAP2_CRYPTO 0 #endif #define MMC_CAP2_ALT_GPT_TEGRA (1 << 28) /* Host with eMMC that has GPT entry at a non-standard location */ +#define MMC_CAP2_SDIO_ASYNC_IRQ (1 << 29) /* SDIO host supports asynchronous interrupt */ int fixed_drv_type; /* fixed driver type for non-removable media */ diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h index 2a05d1ac4f0e..1ef400f28642 100644 --- a/include/linux/mmc/sdio.h +++ b/include/linux/mmc/sdio.h @@ -159,6 +159,11 @@ #define SDIO_DTSx_SET_TYPE_A (1 << SDIO_DRIVE_DTSx_SHIFT) #define SDIO_DTSx_SET_TYPE_C (2 << SDIO_DRIVE_DTSx_SHIFT) #define SDIO_DTSx_SET_TYPE_D (3 << SDIO_DRIVE_DTSx_SHIFT) + +#define SDIO_CCCR_INTERRUPT_EXT 0x16 +#define SDIO_INTERRUPT_EXT_SAI (1 << 0) +#define SDIO_INTERRUPT_EXT_EAI (1 << 1) + /* * Function Basic Registers (FBR) */