diff mbox series

[v2] PCI: mediatek-gen3: Print LTSSM state when PCIe link down

Message ID 20220329030715.7975-1-jianjun.wang@mediatek.com (mailing list archive)
State New, archived
Headers show
Series [v2] PCI: mediatek-gen3: Print LTSSM state when PCIe link down | expand

Commit Message

Jianjun Wang (王建军) March 29, 2022, 3:07 a.m. UTC 
Print current LTSSM state when PCIe link down instead of the register
value, make it easier to get the link status.

Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
Changes in v2:
Print both of the register value and the LTSSM state.
---
 drivers/pci/controller/pcie-mediatek-gen3.c | 41 ++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

Comments

Jianjun Wang (王建军) April 22, 2022, 6:33 a.m. UTC | #1 
Hi Maintainers,

Just gentle ping for this patch, if there is anything I can do to get
this patch merged, please let me know.

Thanks.

On Tue, 2022-03-29 at 11:07 +0800, Jianjun Wang wrote:
> Print current LTSSM state when PCIe link down instead of the register
> value, make it easier to get the link status.
> 
> Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> ---
> Changes in v2:
> Print both of the register value and the LTSSM state.
> ---
>  drivers/pci/controller/pcie-mediatek-gen3.c | 41
> ++++++++++++++++++++-
>  1 file changed, 40 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c
> b/drivers/pci/controller/pcie-mediatek-gen3.c
> index 6745076a02b9..c24e03c198b7 100644
> --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> @@ -153,6 +153,37 @@ struct mtk_gen3_pcie {
>  	DECLARE_BITMAP(msi_irq_in_use, PCIE_MSI_IRQS_NUM);
>  };
>  
> +/* LTSSM state in PCIE_LTSSM_STATUS_REG bit[28:24] */
> +static const char *const ltssm_str[] = {
> +	"detect.quiet",			/* 0x00 */
> +	"detect.active",		/* 0x01 */
> +	"polling.active",		/* 0x02 */
> +	"polling.compliance",		/* 0x03 */
> +	"polling.configuration",	/* 0x04 */
> +	"config.linkwidthstart",	/* 0x05 */
> +	"config.linkwidthaccept",	/* 0x06 */
> +	"config.lanenumwait",		/* 0x07 */
> +	"config.lanenumaccept",		/* 0x08 */
> +	"config.complete",		/* 0x09 */
> +	"config.idle",			/* 0x0A */
> +	"recovery.receiverlock",	/* 0x0B */
> +	"recovery.equalization",	/* 0x0C */
> +	"recovery.speed",		/* 0x0D */
> +	"recovery.receiverconfig",	/* 0x0E */
> +	"recovery.idle",		/* 0x0F */
> +	"L0",				/* 0x10 */
> +	"L0s",				/* 0x11 */
> +	"L1.entry",			/* 0x12 */
> +	"L1.idle",			/* 0x13 */
> +	"L2.idle",			/* 0x14 */
> +	"L2.transmitwake",		/* 0x15 */
> +	"disable",			/* 0x16 */
> +	"loopback.entry",		/* 0x17 */
> +	"loopback.active",		/* 0x18 */
> +	"loopback.exit",		/* 0x19 */
> +	"hotreset",			/* 0x1A */
> +};
> +
>  /**
>   * mtk_pcie_config_tlp_header() - Configure a configuration TLP
> header
>   * @bus: PCI bus to query
> @@ -327,8 +358,16 @@ static int mtk_pcie_startup_port(struct
> mtk_gen3_pcie *pcie)
>  				 !!(val & PCIE_PORT_LINKUP), 20,
>  				 PCI_PM_D3COLD_WAIT * USEC_PER_MSEC);
>  	if (err) {
> +		const char *ltssm_state;
> +		int ltssm_index;
> +
>  		val = readl_relaxed(pcie->base +
> PCIE_LTSSM_STATUS_REG);
> -		dev_err(pcie->dev, "PCIe link down, ltssm reg val:
> %#x\n", val);
> +		ltssm_index = PCIE_LTSSM_STATE(val);
> +		ltssm_state = ltssm_index >= ARRAY_SIZE(ltssm_str) ?
> +			      "Unknown state" : ltssm_str[ltssm_index];
> +		dev_err(pcie->dev,
> +			"PCIe link down, current ltssm state: %s
> (%#x)\n",
> +			ltssm_state, val);
>  		return err;
>  	}
>
Jianjun Wang (王建军) May 18, 2022, 1:55 a.m. UTC | #2 
Hi Maintainers,

Gentle ping for this patch, if there is anything I can do to get this
patch merged, please let me know.

Thanks.

On Fri, 2022-04-22 at 14:33 +0800, Jianjun Wang wrote:
> Hi Maintainers,
> 
> Just gentle ping for this patch, if there is anything I can do to get
> this patch merged, please let me know.
> 
> Thanks.
> 
> On Tue, 2022-03-29 at 11:07 +0800, Jianjun Wang wrote:
> > Print current LTSSM state when PCIe link down instead of the
> > register
> > value, make it easier to get the link status.
> > 
> > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@collabora.com>
> > ---
> > Changes in v2:
> > Print both of the register value and the LTSSM state.
> > ---
> >  drivers/pci/controller/pcie-mediatek-gen3.c | 41
> > ++++++++++++++++++++-
> >  1 file changed, 40 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c
> > b/drivers/pci/controller/pcie-mediatek-gen3.c
> > index 6745076a02b9..c24e03c198b7 100644
> > --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> > @@ -153,6 +153,37 @@ struct mtk_gen3_pcie {
> >  	DECLARE_BITMAP(msi_irq_in_use, PCIE_MSI_IRQS_NUM);
> >  };
> >  
> > +/* LTSSM state in PCIE_LTSSM_STATUS_REG bit[28:24] */
> > +static const char *const ltssm_str[] = {
> > +	"detect.quiet",			/* 0x00 */
> > +	"detect.active",		/* 0x01 */
> > +	"polling.active",		/* 0x02 */
> > +	"polling.compliance",		/* 0x03 */
> > +	"polling.configuration",	/* 0x04 */
> > +	"config.linkwidthstart",	/* 0x05 */
> > +	"config.linkwidthaccept",	/* 0x06 */
> > +	"config.lanenumwait",		/* 0x07 */
> > +	"config.lanenumaccept",		/* 0x08 */
> > +	"config.complete",		/* 0x09 */
> > +	"config.idle",			/* 0x0A */
> > +	"recovery.receiverlock",	/* 0x0B */
> > +	"recovery.equalization",	/* 0x0C */
> > +	"recovery.speed",		/* 0x0D */
> > +	"recovery.receiverconfig",	/* 0x0E */
> > +	"recovery.idle",		/* 0x0F */
> > +	"L0",				/* 0x10 */
> > +	"L0s",				/* 0x11 */
> > +	"L1.entry",			/* 0x12 */
> > +	"L1.idle",			/* 0x13 */
> > +	"L2.idle",			/* 0x14 */
> > +	"L2.transmitwake",		/* 0x15 */
> > +	"disable",			/* 0x16 */
> > +	"loopback.entry",		/* 0x17 */
> > +	"loopback.active",		/* 0x18 */
> > +	"loopback.exit",		/* 0x19 */
> > +	"hotreset",			/* 0x1A */
> > +};
> > +
> >  /**
> >   * mtk_pcie_config_tlp_header() - Configure a configuration TLP
> > header
> >   * @bus: PCI bus to query
> > @@ -327,8 +358,16 @@ static int mtk_pcie_startup_port(struct
> > mtk_gen3_pcie *pcie)
> >  				 !!(val & PCIE_PORT_LINKUP), 20,
> >  				 PCI_PM_D3COLD_WAIT * USEC_PER_MSEC);
> >  	if (err) {
> > +		const char *ltssm_state;
> > +		int ltssm_index;
> > +
> >  		val = readl_relaxed(pcie->base +
> > PCIE_LTSSM_STATUS_REG);
> > -		dev_err(pcie->dev, "PCIe link down, ltssm reg val:
> > %#x\n", val);
> > +		ltssm_index = PCIE_LTSSM_STATE(val);
> > +		ltssm_state = ltssm_index >= ARRAY_SIZE(ltssm_str) ?
> > +			      "Unknown state" : ltssm_str[ltssm_index];
> > +		dev_err(pcie->dev,
> > +			"PCIe link down, current ltssm state: %s
> > (%#x)\n",
> > +			ltssm_state, val);
> >  		return err;
> >  	}
> >  
> 
>
Jianjun Wang (王建军) June 1, 2022, 2:24 a.m. UTC | #3 
Hello Maintainers,

Is there anything I can do to get this patch merged?

Thanks.

On Wed, 2022-05-18 at 09:55 +0800, Jianjun Wang wrote:
> Hi Maintainers,
> 
> Gentle ping for this patch, if there is anything I can do to get this
> patch merged, please let me know.
> 
> Thanks.
> 
> On Fri, 2022-04-22 at 14:33 +0800, Jianjun Wang wrote:
> > Hi Maintainers,
> > 
> > Just gentle ping for this patch, if there is anything I can do to
> > get
> > this patch merged, please let me know.
> > 
> > Thanks.
> > 
> > On Tue, 2022-03-29 at 11:07 +0800, Jianjun Wang wrote:
> > > Print current LTSSM state when PCIe link down instead of the
> > > register
> > > value, make it easier to get the link status.
> > > 
> > > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
> > > Reviewed-by: AngeloGioacchino Del Regno <
> > > angelogioacchino.delregno@collabora.com>
> > > ---
> > > Changes in v2:
> > > Print both of the register value and the LTSSM state.
> > > ---
> > >  drivers/pci/controller/pcie-mediatek-gen3.c | 41
> > > ++++++++++++++++++++-
> > >  1 file changed, 40 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c
> > > b/drivers/pci/controller/pcie-mediatek-gen3.c
> > > index 6745076a02b9..c24e03c198b7 100644
> > > --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> > > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> > > @@ -153,6 +153,37 @@ struct mtk_gen3_pcie {
> > >  	DECLARE_BITMAP(msi_irq_in_use, PCIE_MSI_IRQS_NUM);
> > >  };
> > >  
> > > +/* LTSSM state in PCIE_LTSSM_STATUS_REG bit[28:24] */
> > > +static const char *const ltssm_str[] = {
> > > +	"detect.quiet",			/* 0x00 */
> > > +	"detect.active",		/* 0x01 */
> > > +	"polling.active",		/* 0x02 */
> > > +	"polling.compliance",		/* 0x03 */
> > > +	"polling.configuration",	/* 0x04 */
> > > +	"config.linkwidthstart",	/* 0x05 */
> > > +	"config.linkwidthaccept",	/* 0x06 */
> > > +	"config.lanenumwait",		/* 0x07 */
> > > +	"config.lanenumaccept",		/* 0x08 */
> > > +	"config.complete",		/* 0x09 */
> > > +	"config.idle",			/* 0x0A */
> > > +	"recovery.receiverlock",	/* 0x0B */
> > > +	"recovery.equalization",	/* 0x0C */
> > > +	"recovery.speed",		/* 0x0D */
> > > +	"recovery.receiverconfig",	/* 0x0E */
> > > +	"recovery.idle",		/* 0x0F */
> > > +	"L0",				/* 0x10 */
> > > +	"L0s",				/* 0x11 */
> > > +	"L1.entry",			/* 0x12 */
> > > +	"L1.idle",			/* 0x13 */
> > > +	"L2.idle",			/* 0x14 */
> > > +	"L2.transmitwake",		/* 0x15 */
> > > +	"disable",			/* 0x16 */
> > > +	"loopback.entry",		/* 0x17 */
> > > +	"loopback.active",		/* 0x18 */
> > > +	"loopback.exit",		/* 0x19 */
> > > +	"hotreset",			/* 0x1A */
> > > +};
> > > +
> > >  /**
> > >   * mtk_pcie_config_tlp_header() - Configure a configuration TLP
> > > header
> > >   * @bus: PCI bus to query
> > > @@ -327,8 +358,16 @@ static int mtk_pcie_startup_port(struct
> > > mtk_gen3_pcie *pcie)
> > >  				 !!(val & PCIE_PORT_LINKUP), 20,
> > >  				 PCI_PM_D3COLD_WAIT * USEC_PER_MSEC);
> > >  	if (err) {
> > > +		const char *ltssm_state;
> > > +		int ltssm_index;
> > > +
> > >  		val = readl_relaxed(pcie->base +
> > > PCIE_LTSSM_STATUS_REG);
> > > -		dev_err(pcie->dev, "PCIe link down, ltssm reg val:
> > > %#x\n", val);
> > > +		ltssm_index = PCIE_LTSSM_STATE(val);
> > > +		ltssm_state = ltssm_index >= ARRAY_SIZE(ltssm_str) ?
> > > +			      "Unknown state" : ltssm_str[ltssm_index];
> > > +		dev_err(pcie->dev,
> > > +			"PCIe link down, current ltssm state: %s
> > > (%#x)\n",
> > > +			ltssm_state, val);
> > >  		return err;
> > >  	}
> > >  
> > 
> > 
> 
>
Jianjun Wang (王建军) June 14, 2022, 2:15 a.m. UTC | #4 
Hi Maintainers,

Just gentle ping for this patch, is there anything I can to do to get
this patch merged?

Thanks.

On Wed, 2022-06-01 at 10:24 +0800, Jianjun Wang wrote:
> Hello Maintainers,
> 
> Is there anything I can do to get this patch merged?
> 
> Thanks.
> 
> On Wed, 2022-05-18 at 09:55 +0800, Jianjun Wang wrote:
> > Hi Maintainers,
> > 
> > Gentle ping for this patch, if there is anything I can do to get
> > this
> > patch merged, please let me know.
> > 
> > Thanks.
> > 
> > On Fri, 2022-04-22 at 14:33 +0800, Jianjun Wang wrote:
> > > Hi Maintainers,
> > > 
> > > Just gentle ping for this patch, if there is anything I can do to
> > > get
> > > this patch merged, please let me know.
> > > 
> > > Thanks.
> > > 
> > > On Tue, 2022-03-29 at 11:07 +0800, Jianjun Wang wrote:
> > > > Print current LTSSM state when PCIe link down instead of the
> > > > register
> > > > value, make it easier to get the link status.
> > > > 
> > > > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
> > > > Reviewed-by: AngeloGioacchino Del Regno <
> > > > angelogioacchino.delregno@collabora.com>
> > > > ---
> > > > Changes in v2:
> > > > Print both of the register value and the LTSSM state.
> > > > ---
> > > >  drivers/pci/controller/pcie-mediatek-gen3.c | 41
> > > > ++++++++++++++++++++-
> > > >  1 file changed, 40 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c
> > > > b/drivers/pci/controller/pcie-mediatek-gen3.c
> > > > index 6745076a02b9..c24e03c198b7 100644
> > > > --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> > > > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> > > > @@ -153,6 +153,37 @@ struct mtk_gen3_pcie {
> > > >  	DECLARE_BITMAP(msi_irq_in_use, PCIE_MSI_IRQS_NUM);
> > > >  };
> > > >  
> > > > +/* LTSSM state in PCIE_LTSSM_STATUS_REG bit[28:24] */
> > > > +static const char *const ltssm_str[] = {
> > > > +	"detect.quiet",			/* 0x00 */
> > > > +	"detect.active",		/* 0x01 */
> > > > +	"polling.active",		/* 0x02 */
> > > > +	"polling.compliance",		/* 0x03 */
> > > > +	"polling.configuration",	/* 0x04 */
> > > > +	"config.linkwidthstart",	/* 0x05 */
> > > > +	"config.linkwidthaccept",	/* 0x06 */
> > > > +	"config.lanenumwait",		/* 0x07 */
> > > > +	"config.lanenumaccept",		/* 0x08 */
> > > > +	"config.complete",		/* 0x09 */
> > > > +	"config.idle",			/* 0x0A */
> > > > +	"recovery.receiverlock",	/* 0x0B */
> > > > +	"recovery.equalization",	/* 0x0C */
> > > > +	"recovery.speed",		/* 0x0D */
> > > > +	"recovery.receiverconfig",	/* 0x0E */
> > > > +	"recovery.idle",		/* 0x0F */
> > > > +	"L0",				/* 0x10 */
> > > > +	"L0s",				/* 0x11 */
> > > > +	"L1.entry",			/* 0x12 */
> > > > +	"L1.idle",			/* 0x13 */
> > > > +	"L2.idle",			/* 0x14 */
> > > > +	"L2.transmitwake",		/* 0x15 */
> > > > +	"disable",			/* 0x16 */
> > > > +	"loopback.entry",		/* 0x17 */
> > > > +	"loopback.active",		/* 0x18 */
> > > > +	"loopback.exit",		/* 0x19 */
> > > > +	"hotreset",			/* 0x1A */
> > > > +};
> > > > +
> > > >  /**
> > > >   * mtk_pcie_config_tlp_header() - Configure a configuration
> > > > TLP
> > > > header
> > > >   * @bus: PCI bus to query
> > > > @@ -327,8 +358,16 @@ static int mtk_pcie_startup_port(struct
> > > > mtk_gen3_pcie *pcie)
> > > >  				 !!(val & PCIE_PORT_LINKUP),
> > > > 20,
> > > >  				 PCI_PM_D3COLD_WAIT *
> > > > USEC_PER_MSEC);
> > > >  	if (err) {
> > > > +		const char *ltssm_state;
> > > > +		int ltssm_index;
> > > > +
> > > >  		val = readl_relaxed(pcie->base +
> > > > PCIE_LTSSM_STATUS_REG);
> > > > -		dev_err(pcie->dev, "PCIe link down, ltssm reg
> > > > val:
> > > > %#x\n", val);
> > > > +		ltssm_index = PCIE_LTSSM_STATE(val);
> > > > +		ltssm_state = ltssm_index >=
> > > > ARRAY_SIZE(ltssm_str) ?
> > > > +			      "Unknown state" :
> > > > ltssm_str[ltssm_index];
> > > > +		dev_err(pcie->dev,
> > > > +			"PCIe link down, current ltssm state:
> > > > %s
> > > > (%#x)\n",
> > > > +			ltssm_state, val);
> > > >  		return err;
> > > >  	}
> > > >  
> > > 
> > > 
> > 
> > 
> 
>
Bjorn Helgaas June 15, 2022, 7:59 p.m. UTC | #5 
On Tue, Mar 29, 2022 at 11:07:15AM +0800, Jianjun Wang wrote:
> Print current LTSSM state when PCIe link down instead of the register
> value, make it easier to get the link status.
> 
> Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
> Changes in v2:
> Print both of the register value and the LTSSM state.

Applied to pci/ctrl/mediatek-gen3 for v5.20, thanks!

> ---
>  drivers/pci/controller/pcie-mediatek-gen3.c | 41 ++++++++++++++++++++-
>  1 file changed, 40 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
> index 6745076a02b9..c24e03c198b7 100644
> --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> @@ -153,6 +153,37 @@ struct mtk_gen3_pcie {
>  	DECLARE_BITMAP(msi_irq_in_use, PCIE_MSI_IRQS_NUM);
>  };
>  
> +/* LTSSM state in PCIE_LTSSM_STATUS_REG bit[28:24] */
> +static const char *const ltssm_str[] = {
> +	"detect.quiet",			/* 0x00 */
> +	"detect.active",		/* 0x01 */
> +	"polling.active",		/* 0x02 */
> +	"polling.compliance",		/* 0x03 */
> +	"polling.configuration",	/* 0x04 */
> +	"config.linkwidthstart",	/* 0x05 */
> +	"config.linkwidthaccept",	/* 0x06 */
> +	"config.lanenumwait",		/* 0x07 */
> +	"config.lanenumaccept",		/* 0x08 */
> +	"config.complete",		/* 0x09 */
> +	"config.idle",			/* 0x0A */
> +	"recovery.receiverlock",	/* 0x0B */
> +	"recovery.equalization",	/* 0x0C */
> +	"recovery.speed",		/* 0x0D */
> +	"recovery.receiverconfig",	/* 0x0E */
> +	"recovery.idle",		/* 0x0F */
> +	"L0",				/* 0x10 */
> +	"L0s",				/* 0x11 */
> +	"L1.entry",			/* 0x12 */
> +	"L1.idle",			/* 0x13 */
> +	"L2.idle",			/* 0x14 */
> +	"L2.transmitwake",		/* 0x15 */
> +	"disable",			/* 0x16 */
> +	"loopback.entry",		/* 0x17 */
> +	"loopback.active",		/* 0x18 */
> +	"loopback.exit",		/* 0x19 */
> +	"hotreset",			/* 0x1A */
> +};
> +
>  /**
>   * mtk_pcie_config_tlp_header() - Configure a configuration TLP header
>   * @bus: PCI bus to query
> @@ -327,8 +358,16 @@ static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie)
>  				 !!(val & PCIE_PORT_LINKUP), 20,
>  				 PCI_PM_D3COLD_WAIT * USEC_PER_MSEC);
>  	if (err) {
> +		const char *ltssm_state;
> +		int ltssm_index;
> +
>  		val = readl_relaxed(pcie->base + PCIE_LTSSM_STATUS_REG);
> -		dev_err(pcie->dev, "PCIe link down, ltssm reg val: %#x\n", val);
> +		ltssm_index = PCIE_LTSSM_STATE(val);
> +		ltssm_state = ltssm_index >= ARRAY_SIZE(ltssm_str) ?
> +			      "Unknown state" : ltssm_str[ltssm_index];
> +		dev_err(pcie->dev,
> +			"PCIe link down, current ltssm state: %s (%#x)\n",
> +			ltssm_state, val);
>  		return err;
>  	}
>  
> -- 
> 2.18.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 6745076a02b9..c24e03c198b7 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -153,6 +153,37 @@  struct mtk_gen3_pcie {
 	DECLARE_BITMAP(msi_irq_in_use, PCIE_MSI_IRQS_NUM);
 };
 
+/* LTSSM state in PCIE_LTSSM_STATUS_REG bit[28:24] */
+static const char *const ltssm_str[] = {
+	"detect.quiet",			/* 0x00 */
+	"detect.active",		/* 0x01 */
+	"polling.active",		/* 0x02 */
+	"polling.compliance",		/* 0x03 */
+	"polling.configuration",	/* 0x04 */
+	"config.linkwidthstart",	/* 0x05 */
+	"config.linkwidthaccept",	/* 0x06 */
+	"config.lanenumwait",		/* 0x07 */
+	"config.lanenumaccept",		/* 0x08 */
+	"config.complete",		/* 0x09 */
+	"config.idle",			/* 0x0A */
+	"recovery.receiverlock",	/* 0x0B */
+	"recovery.equalization",	/* 0x0C */
+	"recovery.speed",		/* 0x0D */
+	"recovery.receiverconfig",	/* 0x0E */
+	"recovery.idle",		/* 0x0F */
+	"L0",				/* 0x10 */
+	"L0s",				/* 0x11 */
+	"L1.entry",			/* 0x12 */
+	"L1.idle",			/* 0x13 */
+	"L2.idle",			/* 0x14 */
+	"L2.transmitwake",		/* 0x15 */
+	"disable",			/* 0x16 */
+	"loopback.entry",		/* 0x17 */
+	"loopback.active",		/* 0x18 */
+	"loopback.exit",		/* 0x19 */
+	"hotreset",			/* 0x1A */
+};
+
 /**
  * mtk_pcie_config_tlp_header() - Configure a configuration TLP header
  * @bus: PCI bus to query
@@ -327,8 +358,16 @@  static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie)
 				 !!(val & PCIE_PORT_LINKUP), 20,
 				 PCI_PM_D3COLD_WAIT * USEC_PER_MSEC);
 	if (err) {
+		const char *ltssm_state;
+		int ltssm_index;
+
 		val = readl_relaxed(pcie->base + PCIE_LTSSM_STATUS_REG);
-		dev_err(pcie->dev, "PCIe link down, ltssm reg val: %#x\n", val);
+		ltssm_index = PCIE_LTSSM_STATE(val);
+		ltssm_state = ltssm_index >= ARRAY_SIZE(ltssm_str) ?
+			      "Unknown state" : ltssm_str[ltssm_index];
+		dev_err(pcie->dev,
+			"PCIe link down, current ltssm state: %s (%#x)\n",
+			ltssm_state, val);
 		return err;
 	}