diff mbox series

[22/38] ASoC: rt1019: Add endianness flag in snd_soc_component_driver

Message ID 20220504170905.332415-23-ckeepax@opensource.cirrus.com (mailing list archive)
State New, archived
Headers show
Series Clean up usage of the endianness flag | expand

Commit Message

Charles Keepax May 4, 2022, 5:08 p.m. UTC 
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/rt1019.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/sound/soc/codecs/rt1019.c b/sound/soc/codecs/rt1019.c
index d45d14fe5c427..f3f15fbe85d0e 100644
--- a/sound/soc/codecs/rt1019.c
+++ b/sound/soc/codecs/rt1019.c
@@ -515,7 +515,7 @@  static struct snd_soc_dai_driver rt1019_dai[] = {
 };
 
 static const struct snd_soc_component_driver soc_component_dev_rt1019 = {
-	.probe = rt1019_probe,
+	.probe			= rt1019_probe,
 	.controls		= rt1019_snd_controls,
 	.num_controls		= ARRAY_SIZE(rt1019_snd_controls),
 	.dapm_widgets		= rt1019_dapm_widgets,
@@ -523,6 +523,7 @@  static const struct snd_soc_component_driver soc_component_dev_rt1019 = {
 	.dapm_routes		= rt1019_dapm_routes,
 	.num_dapm_routes	= ARRAY_SIZE(rt1019_dapm_routes),
 	.non_legacy_dai_naming	= 1,
+	.endianness		= 1,
 };
 
 static const struct regmap_config rt1019_regmap = {