| Message ID | 20220530081910.3947168-2-hsinyi@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Separate panel orientation property creating and value setting | expand |
Hi, On 5/30/22 10:19, Hsin-Yi Wang wrote: > drm_dev_register() sets connector->registration_state to > DRM_CONNECTOR_REGISTERED and dev->registered to true. If > drm_connector_set_panel_orientation() is first called after > drm_dev_register(), it will fail several checks and results in following > warning. > > Add a function to create panel orientation property and set default value > to UNKNOWN, so drivers can call this function to init the property earlier > , and let the panel set the real value later. > > [ 4.480976] ------------[ cut here ]------------ > [ 4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc > <snip> > [ 4.609772] Call trace: > [ 4.612208] __drm_mode_object_add+0xb4/0xbc > [ 4.616466] drm_mode_object_add+0x20/0x2c > [ 4.620552] drm_property_create+0xdc/0x174 > [ 4.624723] drm_property_create_enum+0x34/0x98 > [ 4.629241] drm_connector_set_panel_orientation+0x64/0xa0 > [ 4.634716] boe_panel_get_modes+0x88/0xd8 > [ 4.638802] drm_panel_get_modes+0x2c/0x48 > [ 4.642887] panel_bridge_get_modes+0x1c/0x28 > [ 4.647233] drm_bridge_connector_get_modes+0xa0/0xd4 > [ 4.652273] drm_helper_probe_single_connector_modes+0x218/0x700 > [ 4.658266] drm_mode_getconnector+0x1b4/0x45c > [ 4.662699] drm_ioctl_kernel+0xac/0x128 > [ 4.666611] drm_ioctl+0x268/0x410 > [ 4.670002] drm_compat_ioctl+0xdc/0xf0 > [ 4.673829] __arm64_compat_sys_ioctl+0xc8/0x100 > [ 4.678436] el0_svc_common+0xf4/0x1c0 > [ 4.682174] do_el0_svc_compat+0x28/0x3c > [ 4.686088] el0_svc_compat+0x10/0x1c > [ 4.689738] el0_sync_compat_handler+0xa8/0xcc > [ 4.694171] el0_sync_compat+0x178/0x180 > [ 4.698082] ---[ end trace b4f2db9d9c88610b ]--- > [ 4.702721] ------------[ cut here ]------------ > [ 4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8 > <snip> > [ 4.833830] Call trace: > [ 4.836266] drm_object_attach_property+0x48/0xb8 > [ 4.840958] drm_connector_set_panel_orientation+0x84/0xa0 > [ 4.846432] boe_panel_get_modes+0x88/0xd8 > [ 4.850516] drm_panel_get_modes+0x2c/0x48 > [ 4.854600] panel_bridge_get_modes+0x1c/0x28 > [ 4.858946] drm_bridge_connector_get_modes+0xa0/0xd4 > [ 4.863984] drm_helper_probe_single_connector_modes+0x218/0x700 > [ 4.869978] drm_mode_getconnector+0x1b4/0x45c > [ 4.874410] drm_ioctl_kernel+0xac/0x128 > [ 4.878320] drm_ioctl+0x268/0x410 > [ 4.881711] drm_compat_ioctl+0xdc/0xf0 > [ 4.885536] __arm64_compat_sys_ioctl+0xc8/0x100 > [ 4.890142] el0_svc_common+0xf4/0x1c0 > [ 4.893879] do_el0_svc_compat+0x28/0x3c > [ 4.897791] el0_svc_compat+0x10/0x1c > [ 4.901441] el0_sync_compat_handler+0xa8/0xcc > [ 4.905873] el0_sync_compat+0x178/0x180 > [ 4.909783] ---[ end trace b4f2db9d9c88610c ]--- > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > Reviewed-by: Sean Paul <seanpaul@chromium.org> > --- > v9->v10: rebase to latest linux-next. > v9: https://patchwork.kernel.org/project/linux-mediatek/patch/20220318074825.3359978-2-hsinyi@chromium.org/ > v8: https://patchwork.kernel.org/project/linux-mediatek/patch/20220208084234.1684930-1-hsinyi@chromium.org/ > v7: https://patchwork.kernel.org/project/linux-mediatek/patch/20220208073714.1540390-1-hsinyi@chromium.org/ > --- > drivers/gpu/drm/drm_connector.c | 58 +++++++++++++++++++++++++-------- > include/drm/drm_connector.h | 2 ++ > 2 files changed, 47 insertions(+), 13 deletions(-) > > diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c > index 1c48d162c77e..d68cc78f6684 100644 > --- a/drivers/gpu/drm/drm_connector.c > +++ b/drivers/gpu/drm/drm_connector.c > @@ -1252,7 +1252,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = { > * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel > * coordinates, so if userspace rotates the picture to adjust for > * the orientation it must also apply the same transformation to the > - * touchscreen input coordinates. This property is initialized by calling > + * touchscreen input coordinates. This property value is set by calling > * drm_connector_set_panel_orientation() or > * drm_connector_set_panel_orientation_with_quirk() > * > @@ -2310,8 +2310,8 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property); > * @connector: connector for which to set the panel-orientation property. > * @panel_orientation: drm_panel_orientation value to set > * > - * This function sets the connector's panel_orientation and attaches > - * a "panel orientation" property to the connector. > + * This function sets the connector's panel_orientation value. If the property > + * doesn't exist, it will try to create one. > * > * Calling this function on a connector where the panel_orientation has > * already been set is a no-op (e.g. the orientation has been overridden with > @@ -2343,18 +2343,13 @@ int drm_connector_set_panel_orientation( > > prop = dev->mode_config.panel_orientation_property; > if (!prop) { > - prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, > - "panel orientation", > - drm_panel_orientation_enum_list, > - ARRAY_SIZE(drm_panel_orientation_enum_list)); > - if (!prop) > + if (drm_connector_init_panel_orientation_property(connector) < 0) > return -ENOMEM; > - > - dev->mode_config.panel_orientation_property = prop; > + prop = dev->mode_config.panel_orientation_property; > } > > - drm_object_attach_property(&connector->base, prop, > - info->panel_orientation); > + drm_object_property_set_value(&connector->base, prop, > + info->panel_orientation); > return 0; > } > EXPORT_SYMBOL(drm_connector_set_panel_orientation); > @@ -2362,7 +2357,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation); > /** > * drm_connector_set_panel_orientation_with_quirk - set the > * connector's panel_orientation after checking for quirks > - * @connector: connector for which to init the panel-orientation property. > + * @connector: connector for which to set the panel-orientation property. > * @panel_orientation: drm_panel_orientation value to set > * @width: width in pixels of the panel, used for panel quirk detection > * @height: height in pixels of the panel, used for panel quirk detection > @@ -2389,6 +2384,43 @@ int drm_connector_set_panel_orientation_with_quirk( > } > EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk); > > +/** > + * drm_connector_init_panel_orientation_property - > + * create the connector's panel orientation property > + * > + * This function attaches a "panel orientation" property to the connector > + * and initializes its value to DRM_MODE_PANEL_ORIENTATION_UNKNOWN. > + * > + * The value of the property can be set by drm_connector_set_panel_orientation() > + * or drm_connector_set_panel_orientation_with_quirk() later. > + * > + * Returns: > + * Zero on success, negative errno on failure. > + */ > +int drm_connector_init_panel_orientation_property( > + struct drm_connector *connector) > +{ > + struct drm_device *dev = connector->dev; > + struct drm_property *prop; > + > + if(dev->mode_config.panel_orientation_property) > + return 0; > + > + prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, > + "panel orientation", > + drm_panel_orientation_enum_list, > + ARRAY_SIZE(drm_panel_orientation_enum_list)); > + if (!prop) > + return -ENOMEM; > + > + dev->mode_config.panel_orientation_property = prop; > + drm_object_attach_property(&connector->base, prop, > + DRM_MODE_PANEL_ORIENTATION_UNKNOWN); DRM_MODE_PANEL_ORIENTATION_UNKNOWN is -1 which is not a valid value for an enum. IOW when the panel-orientation is DRM_MODE_PANEL_ORIENTATION_UNKNOWN then the property should not be created on the drm-connector object at all. Which brings us back to what I said in reply to the coverletter, it seems that you have a probe ordering problem here; and fixing that issue would make this patch-set unnecessary. Regards, Hans > + > + return 0; > +} > +EXPORT_SYMBOL(drm_connector_init_panel_orientation_property); > + > static const struct drm_prop_enum_list privacy_screen_enum[] = { > { PRIVACY_SCREEN_DISABLED, "Disabled" }, > { PRIVACY_SCREEN_ENABLED, "Enabled" }, > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h > index 3ac4bf87f257..f0681091c617 100644 > --- a/include/drm/drm_connector.h > +++ b/include/drm/drm_connector.h > @@ -1802,6 +1802,8 @@ int drm_connector_set_panel_orientation_with_quirk( > struct drm_connector *connector, > enum drm_panel_orientation panel_orientation, > int width, int height); > +int drm_connector_init_panel_orientation_property( > + struct drm_connector *connector); > int drm_connector_attach_max_bpc_property(struct drm_connector *connector, > int min, int max); > void drm_connector_create_privacy_screen_properties(struct drm_connector *conn);
Hi, On 5/30/22 10:57, Hans de Goede wrote: > Hi, > > On 5/30/22 10:19, Hsin-Yi Wang wrote: >> drm_dev_register() sets connector->registration_state to >> DRM_CONNECTOR_REGISTERED and dev->registered to true. If >> drm_connector_set_panel_orientation() is first called after >> drm_dev_register(), it will fail several checks and results in following >> warning. >> >> Add a function to create panel orientation property and set default value >> to UNKNOWN, so drivers can call this function to init the property earlier >> , and let the panel set the real value later. >> >> [ 4.480976] ------------[ cut here ]------------ >> [ 4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc >> <snip> >> [ 4.609772] Call trace: >> [ 4.612208] __drm_mode_object_add+0xb4/0xbc >> [ 4.616466] drm_mode_object_add+0x20/0x2c >> [ 4.620552] drm_property_create+0xdc/0x174 >> [ 4.624723] drm_property_create_enum+0x34/0x98 >> [ 4.629241] drm_connector_set_panel_orientation+0x64/0xa0 >> [ 4.634716] boe_panel_get_modes+0x88/0xd8 >> [ 4.638802] drm_panel_get_modes+0x2c/0x48 >> [ 4.642887] panel_bridge_get_modes+0x1c/0x28 >> [ 4.647233] drm_bridge_connector_get_modes+0xa0/0xd4 >> [ 4.652273] drm_helper_probe_single_connector_modes+0x218/0x700 >> [ 4.658266] drm_mode_getconnector+0x1b4/0x45c >> [ 4.662699] drm_ioctl_kernel+0xac/0x128 >> [ 4.666611] drm_ioctl+0x268/0x410 >> [ 4.670002] drm_compat_ioctl+0xdc/0xf0 >> [ 4.673829] __arm64_compat_sys_ioctl+0xc8/0x100 >> [ 4.678436] el0_svc_common+0xf4/0x1c0 >> [ 4.682174] do_el0_svc_compat+0x28/0x3c >> [ 4.686088] el0_svc_compat+0x10/0x1c >> [ 4.689738] el0_sync_compat_handler+0xa8/0xcc >> [ 4.694171] el0_sync_compat+0x178/0x180 >> [ 4.698082] ---[ end trace b4f2db9d9c88610b ]--- >> [ 4.702721] ------------[ cut here ]------------ >> [ 4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8 >> <snip> >> [ 4.833830] Call trace: >> [ 4.836266] drm_object_attach_property+0x48/0xb8 >> [ 4.840958] drm_connector_set_panel_orientation+0x84/0xa0 >> [ 4.846432] boe_panel_get_modes+0x88/0xd8 >> [ 4.850516] drm_panel_get_modes+0x2c/0x48 >> [ 4.854600] panel_bridge_get_modes+0x1c/0x28 >> [ 4.858946] drm_bridge_connector_get_modes+0xa0/0xd4 >> [ 4.863984] drm_helper_probe_single_connector_modes+0x218/0x700 >> [ 4.869978] drm_mode_getconnector+0x1b4/0x45c >> [ 4.874410] drm_ioctl_kernel+0xac/0x128 >> [ 4.878320] drm_ioctl+0x268/0x410 >> [ 4.881711] drm_compat_ioctl+0xdc/0xf0 >> [ 4.885536] __arm64_compat_sys_ioctl+0xc8/0x100 >> [ 4.890142] el0_svc_common+0xf4/0x1c0 >> [ 4.893879] do_el0_svc_compat+0x28/0x3c >> [ 4.897791] el0_svc_compat+0x10/0x1c >> [ 4.901441] el0_sync_compat_handler+0xa8/0xcc >> [ 4.905873] el0_sync_compat+0x178/0x180 >> [ 4.909783] ---[ end trace b4f2db9d9c88610c ]--- >> >> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> >> Reviewed-by: Sean Paul <seanpaul@chromium.org> >> --- >> v9->v10: rebase to latest linux-next. >> v9: https://patchwork.kernel.org/project/linux-mediatek/patch/20220318074825.3359978-2-hsinyi@chromium.org/ >> v8: https://patchwork.kernel.org/project/linux-mediatek/patch/20220208084234.1684930-1-hsinyi@chromium.org/ >> v7: https://patchwork.kernel.org/project/linux-mediatek/patch/20220208073714.1540390-1-hsinyi@chromium.org/ >> --- >> drivers/gpu/drm/drm_connector.c | 58 +++++++++++++++++++++++++-------- >> include/drm/drm_connector.h | 2 ++ >> 2 files changed, 47 insertions(+), 13 deletions(-) >> >> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c >> index 1c48d162c77e..d68cc78f6684 100644 >> --- a/drivers/gpu/drm/drm_connector.c >> +++ b/drivers/gpu/drm/drm_connector.c >> @@ -1252,7 +1252,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = { >> * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel >> * coordinates, so if userspace rotates the picture to adjust for >> * the orientation it must also apply the same transformation to the >> - * touchscreen input coordinates. This property is initialized by calling >> + * touchscreen input coordinates. This property value is set by calling >> * drm_connector_set_panel_orientation() or >> * drm_connector_set_panel_orientation_with_quirk() >> * >> @@ -2310,8 +2310,8 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property); >> * @connector: connector for which to set the panel-orientation property. >> * @panel_orientation: drm_panel_orientation value to set >> * >> - * This function sets the connector's panel_orientation and attaches >> - * a "panel orientation" property to the connector. >> + * This function sets the connector's panel_orientation value. If the property >> + * doesn't exist, it will try to create one. >> * >> * Calling this function on a connector where the panel_orientation has >> * already been set is a no-op (e.g. the orientation has been overridden with >> @@ -2343,18 +2343,13 @@ int drm_connector_set_panel_orientation( >> >> prop = dev->mode_config.panel_orientation_property; >> if (!prop) { >> - prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, >> - "panel orientation", >> - drm_panel_orientation_enum_list, >> - ARRAY_SIZE(drm_panel_orientation_enum_list)); >> - if (!prop) >> + if (drm_connector_init_panel_orientation_property(connector) < 0) >> return -ENOMEM; >> - >> - dev->mode_config.panel_orientation_property = prop; >> + prop = dev->mode_config.panel_orientation_property; >> } >> >> - drm_object_attach_property(&connector->base, prop, >> - info->panel_orientation); >> + drm_object_property_set_value(&connector->base, prop, >> + info->panel_orientation); >> return 0; >> } >> EXPORT_SYMBOL(drm_connector_set_panel_orientation); >> @@ -2362,7 +2357,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation); >> /** >> * drm_connector_set_panel_orientation_with_quirk - set the >> * connector's panel_orientation after checking for quirks >> - * @connector: connector for which to init the panel-orientation property. >> + * @connector: connector for which to set the panel-orientation property. >> * @panel_orientation: drm_panel_orientation value to set >> * @width: width in pixels of the panel, used for panel quirk detection >> * @height: height in pixels of the panel, used for panel quirk detection >> @@ -2389,6 +2384,43 @@ int drm_connector_set_panel_orientation_with_quirk( >> } >> EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk); >> >> +/** >> + * drm_connector_init_panel_orientation_property - >> + * create the connector's panel orientation property >> + * >> + * This function attaches a "panel orientation" property to the connector >> + * and initializes its value to DRM_MODE_PANEL_ORIENTATION_UNKNOWN. >> + * >> + * The value of the property can be set by drm_connector_set_panel_orientation() >> + * or drm_connector_set_panel_orientation_with_quirk() later. >> + * >> + * Returns: >> + * Zero on success, negative errno on failure. >> + */ >> +int drm_connector_init_panel_orientation_property( >> + struct drm_connector *connector) >> +{ >> + struct drm_device *dev = connector->dev; >> + struct drm_property *prop; >> + >> + if(dev->mode_config.panel_orientation_property) >> + return 0; >> + >> + prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, >> + "panel orientation", >> + drm_panel_orientation_enum_list, >> + ARRAY_SIZE(drm_panel_orientation_enum_list)); >> + if (!prop) >> + return -ENOMEM; >> + >> + dev->mode_config.panel_orientation_property = prop; >> + drm_object_attach_property(&connector->base, prop, >> + DRM_MODE_PANEL_ORIENTATION_UNKNOWN); > > DRM_MODE_PANEL_ORIENTATION_UNKNOWN is -1 which is not a valid value > for an enum. IOW when the panel-orientation is DRM_MODE_PANEL_ORIENTATION_UNKNOWN > then the property should not be created on the drm-connector object at all. p.s. note that the original drm_connector_set_panel_orientation() avoids ever creating the property when the orientation is unknown because of this bit of code near the top of the function: /* Don't attach the property if the orientation is unknown */ if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN) return 0; > Which brings us back to what I said in reply to the coverletter, > it seems that you have a probe ordering problem here; and fixing that > issue would make this patch-set unnecessary. Regards, Hans >> + >> + return 0; >> +} >> +EXPORT_SYMBOL(drm_connector_init_panel_orientation_property); >> + >> static const struct drm_prop_enum_list privacy_screen_enum[] = { >> { PRIVACY_SCREEN_DISABLED, "Disabled" }, >> { PRIVACY_SCREEN_ENABLED, "Enabled" }, >> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h >> index 3ac4bf87f257..f0681091c617 100644 >> --- a/include/drm/drm_connector.h >> +++ b/include/drm/drm_connector.h >> @@ -1802,6 +1802,8 @@ int drm_connector_set_panel_orientation_with_quirk( >> struct drm_connector *connector, >> enum drm_panel_orientation panel_orientation, >> int width, int height); >> +int drm_connector_init_panel_orientation_property( >> + struct drm_connector *connector); >> int drm_connector_attach_max_bpc_property(struct drm_connector *connector, >> int min, int max); >> void drm_connector_create_privacy_screen_properties(struct drm_connector *conn);
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index 1c48d162c77e..d68cc78f6684 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -1252,7 +1252,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = { * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel * coordinates, so if userspace rotates the picture to adjust for * the orientation it must also apply the same transformation to the - * touchscreen input coordinates. This property is initialized by calling + * touchscreen input coordinates. This property value is set by calling * drm_connector_set_panel_orientation() or * drm_connector_set_panel_orientation_with_quirk() * @@ -2310,8 +2310,8 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property); * @connector: connector for which to set the panel-orientation property. * @panel_orientation: drm_panel_orientation value to set * - * This function sets the connector's panel_orientation and attaches - * a "panel orientation" property to the connector. + * This function sets the connector's panel_orientation value. If the property + * doesn't exist, it will try to create one. * * Calling this function on a connector where the panel_orientation has * already been set is a no-op (e.g. the orientation has been overridden with @@ -2343,18 +2343,13 @@ int drm_connector_set_panel_orientation( prop = dev->mode_config.panel_orientation_property; if (!prop) { - prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, - "panel orientation", - drm_panel_orientation_enum_list, - ARRAY_SIZE(drm_panel_orientation_enum_list)); - if (!prop) + if (drm_connector_init_panel_orientation_property(connector) < 0) return -ENOMEM; - - dev->mode_config.panel_orientation_property = prop; + prop = dev->mode_config.panel_orientation_property; } - drm_object_attach_property(&connector->base, prop, - info->panel_orientation); + drm_object_property_set_value(&connector->base, prop, + info->panel_orientation); return 0; } EXPORT_SYMBOL(drm_connector_set_panel_orientation); @@ -2362,7 +2357,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation); /** * drm_connector_set_panel_orientation_with_quirk - set the * connector's panel_orientation after checking for quirks - * @connector: connector for which to init the panel-orientation property. + * @connector: connector for which to set the panel-orientation property. * @panel_orientation: drm_panel_orientation value to set * @width: width in pixels of the panel, used for panel quirk detection * @height: height in pixels of the panel, used for panel quirk detection @@ -2389,6 +2384,43 @@ int drm_connector_set_panel_orientation_with_quirk( } EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk); +/** + * drm_connector_init_panel_orientation_property - + * create the connector's panel orientation property + * + * This function attaches a "panel orientation" property to the connector + * and initializes its value to DRM_MODE_PANEL_ORIENTATION_UNKNOWN. + * + * The value of the property can be set by drm_connector_set_panel_orientation() + * or drm_connector_set_panel_orientation_with_quirk() later. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_connector_init_panel_orientation_property( + struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_property *prop; + + if(dev->mode_config.panel_orientation_property) + return 0; + + prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, + "panel orientation", + drm_panel_orientation_enum_list, + ARRAY_SIZE(drm_panel_orientation_enum_list)); + if (!prop) + return -ENOMEM; + + dev->mode_config.panel_orientation_property = prop; + drm_object_attach_property(&connector->base, prop, + DRM_MODE_PANEL_ORIENTATION_UNKNOWN); + + return 0; +} +EXPORT_SYMBOL(drm_connector_init_panel_orientation_property); + static const struct drm_prop_enum_list privacy_screen_enum[] = { { PRIVACY_SCREEN_DISABLED, "Disabled" }, { PRIVACY_SCREEN_ENABLED, "Enabled" }, diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 3ac4bf87f257..f0681091c617 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -1802,6 +1802,8 @@ int drm_connector_set_panel_orientation_with_quirk( struct drm_connector *connector, enum drm_panel_orientation panel_orientation, int width, int height); +int drm_connector_init_panel_orientation_property( + struct drm_connector *connector); int drm_connector_attach_max_bpc_property(struct drm_connector *connector, int min, int max); void drm_connector_create_privacy_screen_properties(struct drm_connector *conn);