@@ -10,6 +10,7 @@
* #imm16 values used for BRK instruction generation
* 0x004: for installing kprobes
* 0x005: for installing uprobes
+ * 0x006: for kprobe software single-step
* Allowed values for kgdb are 0x400 - 0x7ff
* 0x100: for triggering a fault on purpose (reserved)
* 0x400: for dynamic BRK instruction
@@ -19,6 +20,7 @@
*/
#define KPROBES_BRK_IMM 0x004
#define UPROBES_BRK_IMM 0x005
+#define KPROBES_BRK_SS_IMM 0x006
#define FAULT_BRK_IMM 0x100
#define KGDB_DYN_DBG_BRK_IMM 0x400
#define KGDB_COMPILED_DBG_BRK_IMM 0x401
@@ -53,6 +53,7 @@
/* kprobes BRK opcodes with ESR encoding */
#define BRK64_OPCODE_KPROBES (AARCH64_BREAK_MON | (KPROBES_BRK_IMM << 5))
+#define BRK64_OPCODE_KPROBES_SS (AARCH64_BREAK_MON | (KPROBES_BRK_SS_IMM << 5))
/* uprobes BRK opcodes with ESR encoding */
#define BRK64_OPCODE_UPROBES (AARCH64_BREAK_MON | (UPROBES_BRK_IMM << 5))
@@ -16,7 +16,7 @@
#include <linux/percpu.h>
#define __ARCH_WANT_KPROBES_INSN_SLOT
-#define MAX_INSN_SIZE 1
+#define MAX_INSN_SIZE 2
#define flush_insn_slot(p) do { } while (0)
#define kretprobe_blacklist_size 0
@@ -36,25 +36,16 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
static void __kprobes
post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *);
-static int __kprobes patch_text(kprobe_opcode_t *addr, u32 opcode)
-{
- void *addrs[1];
- u32 insns[1];
-
- addrs[0] = addr;
- insns[0] = opcode;
-
- return aarch64_insn_patch_text(addrs, insns, 1);
-}
-
static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
{
+ kprobe_opcode_t *addr = p->ainsn.api.insn;
+ void *addrs[] = {addr, addr + 1};
+ u32 insns[] = {p->opcode, BRK64_OPCODE_KPROBES_SS};
+
/* prepare insn slot */
- patch_text(p->ainsn.api.insn, p->opcode);
+ aarch64_insn_patch_text(addrs, insns, 2);
- flush_icache_range((uintptr_t) (p->ainsn.api.insn),
- (uintptr_t) (p->ainsn.api.insn) +
- MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+ flush_icache_range((uintptr_t)addr, (uintptr_t)(addr + MAX_INSN_SIZE));
/*
* Needs restoring of return address after stepping xol.
@@ -134,13 +125,18 @@ void *alloc_insn_page(void)
/* arm kprobe: install breakpoint in text */
void __kprobes arch_arm_kprobe(struct kprobe *p)
{
- patch_text(p->addr, BRK64_OPCODE_KPROBES);
+ void *addr = p->addr;
+ u32 insn = BRK64_OPCODE_KPROBES;
+
+ aarch64_insn_patch_text(&addr, &insn, 1);
}
/* disarm kprobe: remove breakpoint from text */
void __kprobes arch_disarm_kprobe(struct kprobe *p)
{
- patch_text(p->addr, p->opcode);
+ void *addr = p->addr;
+
+ aarch64_insn_patch_text(&addr, &p->opcode, 1);
}
void __kprobes arch_remove_kprobe(struct kprobe *p)
@@ -169,20 +165,15 @@ static void __kprobes set_current_kprobe(struct kprobe *p)
}
/*
- * Interrupts need to be disabled before single-step mode is set, and not
- * reenabled until after single-step mode ends.
- * Without disabling interrupt on local CPU, there is a chance of
- * interrupt occurrence in the period of exception return and start of
- * out-of-line single-step, that result in wrongly single stepping
- * into the interrupt handler.
+ * Mask all of DAIF while executing the instruction out-of-line, to keep things
+ * simple and avoid nesting exceptions. Interrupts do have to be disabled since
+ * the kprobe state is per-CPU and doesn't get migrated.
*/
static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb,
struct pt_regs *regs)
{
kcb->saved_irqflag = regs->pstate & DAIF_MASK;
- regs->pstate |= PSR_I_BIT;
- /* Unmask PSTATE.D for enabling software step exceptions. */
- regs->pstate &= ~PSR_D_BIT;
+ regs->pstate |= DAIF_MASK;
}
static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb,
@@ -225,10 +216,7 @@ static void __kprobes setup_singlestep(struct kprobe *p,
slot = (unsigned long)p->ainsn.api.insn;
set_ss_context(kcb, slot); /* mark pending ss */
-
- /* IRQs and single stepping do not mix well. */
kprobes_save_local_irqflag(kcb, regs);
- kernel_enable_single_step(regs);
instruction_pointer_set(regs, slot);
} else {
/* insn simulation */
@@ -279,12 +267,8 @@ post_kprobe_handler(struct kprobe_ctlblk *kcb, struct pt_regs *regs)
}
/* call post handler */
kcb->kprobe_status = KPROBE_HIT_SSDONE;
- if (cur->post_handler) {
- /* post_handler can hit breakpoint and single step
- * again, so we enable D-flag for recursive exception.
- */
+ if (cur->post_handler)
cur->post_handler(cur, regs, 0);
- }
reset_current_kprobe();
}
@@ -308,8 +292,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
if (!instruction_pointer(regs))
BUG();
- kernel_disable_single_step();
-
if (kcb->kprobe_status == KPROBE_REENTER)
restore_previous_kprobe(kcb);
else
@@ -371,10 +353,6 @@ static void __kprobes kprobe_handler(struct pt_regs *regs)
* pre-handler and it returned non-zero, it will
* modify the execution path and no need to single
* stepping. Let's just reset current kprobe and exit.
- *
- * pre_handler can hit a breakpoint and can step thru
- * before return, keep PSTATE D-flag enabled until
- * pre_handler return back.
*/
if (!p->pre_handler || !p->pre_handler(p, regs)) {
setup_singlestep(p, regs, kcb, 0);
@@ -405,7 +383,7 @@ kprobe_ss_hit(struct kprobe_ctlblk *kcb, unsigned long addr)
}
static int __kprobes
-kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr)
+kprobe_breakpoint_ss_handler(struct pt_regs *regs, unsigned int esr)
{
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
int retval;
@@ -415,16 +393,15 @@ kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr)
if (retval == DBG_HOOK_HANDLED) {
kprobes_restore_local_irqflag(kcb, regs);
- kernel_disable_single_step();
-
post_kprobe_handler(kcb, regs);
}
return retval;
}
-static struct step_hook kprobes_step_hook = {
- .fn = kprobe_single_step_handler,
+static struct break_hook kprobes_break_ss_hook = {
+ .imm = KPROBES_BRK_SS_IMM,
+ .fn = kprobe_breakpoint_ss_handler,
};
static int __kprobes
@@ -568,7 +545,7 @@ int __kprobes arch_trampoline_kprobe(struct kprobe *p)
int __init arch_init_kprobes(void)
{
register_kernel_break_hook(&kprobes_break_hook);
- register_kernel_step_hook(&kprobes_step_hook);
+ register_kernel_break_hook(&kprobes_break_ss_hook);
return 0;
}