| Message ID | 20231019075458.28290-5-jason-ch.chen@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add basic node support for MediaTek MT8188 SoC | expand |
Il 19/10/23 09:54, Jason-ch Chen ha scritto: > From: jason-ch chen <Jason-ch.Chen@mediatek.com> > > MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55 > and 2 CA78 cores. MT8188 share many HW IP with MT65xx series. > > We add basic chip support for MediaTek MT8188 on evaluation board. > > Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> > --- > arch/arm64/boot/dts/mediatek/Makefile | 1 + > arch/arm64/boot/dts/mediatek/mt8188-evb.dts | 388 ++++++++ > arch/arm64/boot/dts/mediatek/mt8188.dtsi | 949 ++++++++++++++++++++ > 3 files changed, 1338 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8188-evb.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8188.dtsi > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index e6e7592a3645..8900b939ed52 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts > new file mode 100644 > index 000000000000..773bf84cfb94 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts > @@ -0,0 +1,388 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +/* > + * Copyright (C) 2023 MediaTek Inc. > + */ > +/dts-v1/; > +#include "mt8188.dtsi" > +#include "mt6359.dtsi" > + > +/ { > + model = "MediaTek MT8188 evaluation board"; > + compatible = "mediatek,mt8188-evb", "mediatek,mt8188"; > + > + aliases { > + serial0 = &uart0; > + i2c0 = &i2c0; > + i2c1 = &i2c1; > + i2c2 = &i2c2; > + i2c3 = &i2c3; > + i2c4 = &i2c4; > + i2c5 = &i2c5; > + i2c6 = &i2c6; > + mmc0 = &mmc0; > + }; > + > + chosen: chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0 0x40000000 0 0x80000000>; > + }; > + > + reserved_memory: reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + scp_mem_reserved: memory@50000000 { > + compatible = "shared-dma-pool"; > + reg = <0 0x50000000 0 0x2900000>; > + no-map; > + }; > + }; > +}; > + > +&auxadc { > + status = "okay"; > +}; > + > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins>; > + clock-frequency = <400000>; > + status = "okay"; > +}; > + > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins>; > + clock-frequency = <400000>; > + status = "okay"; > +}; > + > +&i2c2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c2_pins>; > + clock-frequency = <400000>; > + status = "okay"; > +}; > + > +&i2c3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c3_pins>; > + clock-frequency = <400000>; > + status = "okay"; > +}; > + > +&i2c4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c4_pins>; > + clock-frequency = <400000>; > + status = "okay"; > +}; > + > +&i2c5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c5_pins>; > + clock-frequency = <400000>; > + status = "okay"; > +}; > + > +&i2c6 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c6_pins>; > + clock-frequency = <400000>; > + status = "okay"; > +}; > + > +&mmc0 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc0_default_pins>; > + pinctrl-1 = <&mmc0_uhs_pins>; > + bus-width = <8>; > + max-frequency = <200000000>; ...that's how it should be ordered: &mmc0 { bus-width = <8>; hs400-ds-delay = <0x1481b>; max-frequency = <200000000>; cap-mmc-highspeed; cap-mmc-hw-reset; mmc-hs200-1_8v; mmc-hs400-1_8v; no-sdio; no-sd; non-removable; vmmc-supply = ... vqmmc-supply = ... pinctrl-0 ... pinctrl-1 ... pinctrl-names ... status = "okay"; }; > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + supports-cqe; > + cap-mmc-hw-reset; > + no-sdio; > + no-sd; > + hs400-ds-delay = <0x1481b>; > + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; > + vqmmc-supply = <&mt6359_vufs_ldo_reg>; > + non-removable; > +}; > + > +&mt6359_vcore_buck_reg { > + regulator-always-on; > +}; > + > +&mt6359_vgpu11_buck_reg { > + regulator-always-on; > +}; > + > +&mt6359_vpu_buck_reg { > + regulator-always-on; > +}; > + > +&mt6359_vrf12_ldo_reg { > + regulator-always-on; > +}; > + > +&nor_flash { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&nor_pins_default>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <52000000>; > + }; > +}; > + > +&pio { > + adsp_uart_pins: adsp-uart-pins { > + pins-adsp-uart { pins-tx-rx { > + pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>, > + <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>; > + }; > + }; > + ..snip.. > + > + mmc0_uhs_pins: mmc0-uhs-pins { > + pins-cmd-dat { > + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, > + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, > + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, > + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, > + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, > + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, > + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, > + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, > + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; > + input-enable; > + drive-strength = <8>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins-clk { pins-clk-ds { pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>, <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; ...that's shorter: both pins are anyway sharing the same drive strength and bias. > + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; > + drive-strength = <8>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins-ds { > + pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; > + drive-strength = <8>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins-rst { > + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; > + drive-strength = <8>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + }; > + > + nor_pins_default: nor-pins { > + pins0 { pins-io-ck { > + pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>, > + <PINMUX_GPIO125__FUNC_O_SPINOR_CK>, > + <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>; > + bias-pull-down; > + }; > + > + pins1 { pins-io-cs { > + pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>, > + <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>, > + <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>; > + bias-pull-up; > + }; > + }; > + > + spi0_pins: spi0-pins { > + pins-spi { > + pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>, > + <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>, > + <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>, > + <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>; > + bias-disable; > + }; > + }; > + > + spi1_pins: spi1-pins { > + pins-spi { > + pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>, > + <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>, > + <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>, > + <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>; > + bias-disable; > + }; > + }; > + > + spi2_pins: spi2-pins { > + pins-spi { > + pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>, > + <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>, > + <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>, > + <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>; > + bias-disable; > + }; > + }; > + > + uart0_pins: uart0-pins { > + pins-uart0 { pins-rx-tx { > + pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>, > + <PINMUX_GPIO32__FUNC_I1_URXD0>; > + bias-pull-up; > + }; > + }; > +}; > + ..snip.. > diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi > new file mode 100644 > index 000000000000..c5af32fb7e85 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi > @@ -0,0 +1,949 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (c) 2023 MediaTek Inc. > + * > + */ > + > +/dts-v1/; > +#include <dt-bindings/clock/mediatek,mt8188-clk.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/phy/phy.h> > +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> > +#include <dt-bindings/power/mediatek,mt8188-power.h> > + > +/ { > + compatible = "mediatek,mt8188"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + reg = <0x000>; > + enable-method = "psci"; > + clock-frequency = <2000000000>; > + capacity-dmips-mhz = <282>; > + cpu-idle-states = <&cpu_off_l &cluster_off_l>; > + i-cache-size = <32768>; > + i-cache-line-size = <64>; > + i-cache-sets = <128>; > + d-cache-size = <32768>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&l2_0>; > + #cooling-cells = <2>; > + }; > + > + cpu1: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + reg = <0x100>; > + enable-method = "psci"; > + clock-frequency = <2000000000>; > + capacity-dmips-mhz = <282>; > + cpu-idle-states = <&cpu_off_l &cluster_off_l>; > + i-cache-size = <32768>; > + i-cache-line-size = <64>; > + i-cache-sets = <128>; > + d-cache-size = <32768>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&l2_0>; > + #cooling-cells = <2>; > + }; > + > + cpu2: cpu@200 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + reg = <0x200>; > + enable-method = "psci"; > + clock-frequency = <2000000000>; > + capacity-dmips-mhz = <282>; > + cpu-idle-states = <&cpu_off_l &cluster_off_l>; > + i-cache-size = <32768>; > + i-cache-line-size = <64>; > + i-cache-sets = <128>; > + d-cache-size = <32768>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&l2_0>; > + #cooling-cells = <2>; > + }; > + > + cpu3: cpu@300 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + reg = <0x300>; > + enable-method = "psci"; > + clock-frequency = <2000000000>; > + capacity-dmips-mhz = <282>; > + cpu-idle-states = <&cpu_off_l &cluster_off_l>; > + i-cache-size = <32768>; > + i-cache-line-size = <64>; > + i-cache-sets = <128>; > + d-cache-size = <32768>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&l2_0>; > + #cooling-cells = <2>; > + }; > + > + cpu4: cpu@400 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + reg = <0x400>; > + enable-method = "psci"; > + clock-frequency = <2000000000>; > + capacity-dmips-mhz = <282>; > + cpu-idle-states = <&cpu_off_l &cluster_off_l>; > + i-cache-size = <32768>; > + i-cache-line-size = <64>; > + i-cache-sets = <128>; > + d-cache-size = <32768>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&l2_0>; > + #cooling-cells = <2>; > + }; > + > + cpu5: cpu@500 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + reg = <0x500>; > + enable-method = "psci"; > + clock-frequency = <2000000000>; > + capacity-dmips-mhz = <282>; > + cpu-idle-states = <&cpu_off_l &cluster_off_l>; > + i-cache-size = <32768>; > + i-cache-line-size = <64>; > + i-cache-sets = <128>; > + d-cache-size = <32768>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&l2_0>; > + #cooling-cells = <2>; > + }; > + > + cpu6: cpu@600 { > + device_type = "cpu"; > + compatible = "arm,cortex-a78"; > + reg = <0x600>; > + enable-method = "psci"; > + clock-frequency = <2600000000>; > + capacity-dmips-mhz = <1024>; > + cpu-idle-states = <&cpu_off_b &cluster_off_b>; > + i-cache-size = <65536>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <65536>; > + d-cache-line-size = <64>; > + d-cache-sets = <256>; > + next-level-cache = <&l2_1>; > + #cooling-cells = <2>; > + }; > + > + cpu7: cpu@700 { > + device_type = "cpu"; > + compatible = "arm,cortex-a78"; > + reg = <0x700>; > + enable-method = "psci"; > + clock-frequency = <2600000000>; > + capacity-dmips-mhz = <1024>; > + cpu-idle-states = <&cpu_off_b &cluster_off_b>; > + i-cache-size = <65536>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <65536>; > + d-cache-line-size = <64>; > + d-cache-sets = <256>; > + next-level-cache = <&l2_1>; > + #cooling-cells = <2>; > + }; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&cpu0>; > + }; > + > + core1 { > + cpu = <&cpu1>; > + }; > + > + core2 { > + cpu = <&cpu2>; > + }; > + > + core3 { > + cpu = <&cpu3>; > + }; > + > + core4 { > + cpu = <&cpu4>; > + }; > + > + core5 { > + cpu = <&cpu5>; > + }; > + > + core6 { > + cpu = <&cpu6>; > + }; > + > + core7 { > + cpu = <&cpu7>; > + }; > + }; > + }; > + > + idle-states { > + entry-method = "psci"; > + > + cpu_off_l: cpu-off-l { > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x00010000>; > + local-timer-stop; > + entry-latency-us = <50>; > + exit-latency-us = <95>; > + min-residency-us = <580>; > + }; > + > + cpu_off_b: cpu-off-b { > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x00010000>; > + local-timer-stop; > + entry-latency-us = <45>; > + exit-latency-us = <140>; > + min-residency-us = <740>; > + }; > + > + cluster_off_l: cluster-off-l { > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x01010010>; > + local-timer-stop; > + entry-latency-us = <55>; > + exit-latency-us = <155>; > + min-residency-us = <840>; > + }; > + > + cluster_off_b: cluster-off-b { > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x01010010>; > + local-timer-stop; > + entry-latency-us = <50>; > + exit-latency-us = <200>; > + min-residency-us = <1000>; > + }; > + }; > + > + l2_0: l2-cache0 { > + compatible = "cache"; > + cache-level = <2>; NACK. You're not specifying the L2 cache correctly. Hint: the missing properties are cache-size cache-line-size cache-sets > + next-level-cache = <&l3_0>; > + cache-unified; > + }; > + > + l2_1: l2-cache1 { > + compatible = "cache"; > + cache-level = <2>; Same here. Please properly define the L2 cache. > + next-level-cache = <&l3_0>; > + cache-unified; > + }; > + > + l3_0: l3-cache { > + compatible = "cache"; And again. This SoC has 256KB L2 shared between the two A78 cores, 128KB L2 shared between the A55 cores, and 2MB of L3 cache shared across all. > + cache-level = <3>; > + cache-unified; > + }; > + }; > + > + clk13m: oscillator-13m { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <13000000>; > + clock-output-names = "clk13m"; > + }; > + > + clk26m: oscillator-26m { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <26000000>; > + clock-output-names = "clk26m"; > + }; > + > + clk32k: oscillator-32k { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + clock-output-names = "clk32k"; > + }; > + > + pmu-a55 { > + compatible = "arm,cortex-a55-pmu"; > + interrupt-parent = <&gic>; > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>; > + }; > + > + pmu-a78 { > + compatible = "arm,cortex-a78-pmu"; > + interrupt-parent = <&gic>; > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>; > + }; Question: Is the ARM DSU PMU broken also on this SoC's TZ firmware?! > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + timer: timer { > + compatible = "arm,armv8-timer"; > + interrupt-parent = <&gic>; > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>; > + clock-frequency = <13000000>; > + }; > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + compatible = "simple-bus"; > + ranges; > + > + gic: interrupt-controller@c000000 { > + compatible = "arm,gic-v3"; > + #interrupt-cells = <4>; > + #redistributor-regions = <1>; > + interrupt-parent = <&gic>; > + interrupt-controller; > + reg = <0 0x0c000000 0 0x40000>, > + <0 0x0c040000 0 0x200000>; > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; > + > + ppi-partitions { > + ppi_cluster0: interrupt-partition-0 { > + affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>; > + }; > + > + ppi_cluster1: interrupt-partition-1 { > + affinity = <&cpu6 &cpu7>; > + }; > + }; > + }; > + > + topckgen: syscon@10000000 { > + compatible = "mediatek,mt8188-topckgen", "syscon"; > + reg = <0 0x10000000 0 0x1000>; > + #clock-cells = <1>; > + }; > + > + infracfg_ao: syscon@10001000 { > + compatible = "mediatek,mt8188-infracfg-ao", "syscon"; > + reg = <0 0x10001000 0 0x1000>; > + #clock-cells = <1>; > + }; > + > + pericfg: syscon@10003000 { > + compatible = "mediatek,mt8188-pericfg", "syscon"; > + reg = <0 0x10003000 0 0x1000>; > + #clock-cells = <1>; > + }; > + > + pio: pinctrl@10005000 { > + compatible = "mediatek,mt8188-pinctrl"; > + reg = <0 0x10005000 0 0x1000>, > + <0 0x11c00000 0 0x1000>, > + <0 0x11e10000 0 0x1000>, > + <0 0x11e20000 0 0x1000>, > + <0 0x11ea0000 0 0x1000>, > + <0 0x1000b000 0 0x1000>; > + reg-names = "iocfg0", "iocfg_rm", > + "iocfg_lt", "iocfg_lm", "iocfg_rt", > + "eint"; reg-names = "iocfg0", "iocfg_rm", "iocfg_lt", "iocfg_lm", "iocfg_rt", "eint"; one less line :-) > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&pio 0 0 176>; > + interrupt-controller; > + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>; > + #interrupt-cells = <2>; > + }; > + > + watchdog: watchdog@10007000 { > + compatible = "mediatek,mt8188-wdt"; > + mediatek,disable-extrst; > + reg = <0 0x10007000 0 0x100>; mediatek,disable-extrst goes here. > + #reset-cells = <1>; > + }; > + > + apmixedsys: syscon@1000c000 { > + compatible = "mediatek,mt8188-apmixedsys", "syscon"; > + reg = <0 0x1000c000 0 0x1000>; > + #clock-cells = <1>; > + }; > + > + systimer: timer@10017000 { > + compatible = "mediatek,mt8188-timer", "mediatek,mt6765-timer"; > + reg = <0 0x10017000 0 0x1000>; > + reg-names = "sys_timer_base"; You don't need reg-names here but anyway, if you really want to keep that, please no underscores when possible. > + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>; > + clocks = <&clk13m>; > + }; > + Regards, Angelo
Hi Angelo, On Thu, 2023-10-19 at 11:47 +0200, AngeloGioacchino Del Regno wrote: > Il 19/10/23 09:54, Jason-ch Chen ha scritto: > > From: jason-ch chen <Jason-ch.Chen@mediatek.com> > > > > MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6 > > CA55 > > and 2 CA78 cores. MT8188 share many HW IP with MT65xx series. > > > > We add basic chip support for MediaTek MT8188 on evaluation board. > > > > Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> > > --- > > arch/arm64/boot/dts/mediatek/Makefile | 1 + > > arch/arm64/boot/dts/mediatek/mt8188-evb.dts | 388 ++++++++ > > arch/arm64/boot/dts/mediatek/mt8188.dtsi | 949 > > ++++++++++++++++++++ > > 3 files changed, 1338 insertions(+) > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8188-evb.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8188.dtsi > > > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile > > b/arch/arm64/boot/dts/mediatek/Makefile > > index e6e7592a3645..8900b939ed52 100644 > > --- a/arch/arm64/boot/dts/mediatek/Makefile > > +++ b/arch/arm64/boot/dts/mediatek/Makefile > > @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui- > > krane-sku0.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb > > diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts > > b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts > > new file mode 100644 > > index 000000000000..773bf84cfb94 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts > > @@ -0,0 +1,388 @@ > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > > +/* > > + * Copyright (C) 2023 MediaTek Inc. > > + */ > > +/dts-v1/; > > +#include "mt8188.dtsi" > > +#include "mt6359.dtsi" > > + > > +/ { > > + model = "MediaTek MT8188 evaluation board"; > > + compatible = "mediatek,mt8188-evb", "mediatek,mt8188"; > > + > > + aliases { > > + serial0 = &uart0; > > + i2c0 = &i2c0; > > + i2c1 = &i2c1; > > + i2c2 = &i2c2; > > + i2c3 = &i2c3; > > + i2c4 = &i2c4; > > + i2c5 = &i2c5; > > + i2c6 = &i2c6; > > + mmc0 = &mmc0; > > + }; > > + > > + chosen: chosen { > > + stdout-path = "serial0:115200n8"; > > + }; > > + > > + memory@40000000 { > > + device_type = "memory"; > > + reg = <0 0x40000000 0 0x80000000>; > > + }; > > + > > + reserved_memory: reserved-memory { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + scp_mem_reserved: memory@50000000 { > > + compatible = "shared-dma-pool"; > > + reg = <0 0x50000000 0 0x2900000>; > > + no-map; > > + }; > > + }; > > +}; > > + > > +&auxadc { > > + status = "okay"; > > +}; > > + > > +&i2c0 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2c0_pins>; > > + clock-frequency = <400000>; > > + status = "okay"; > > +}; > > + > > +&i2c1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2c1_pins>; > > + clock-frequency = <400000>; > > + status = "okay"; > > +}; > > + > > +&i2c2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2c2_pins>; > > + clock-frequency = <400000>; > > + status = "okay"; > > +}; > > + > > +&i2c3 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2c3_pins>; > > + clock-frequency = <400000>; > > + status = "okay"; > > +}; > > + > > +&i2c4 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2c4_pins>; > > + clock-frequency = <400000>; > > + status = "okay"; > > +}; > > + > > +&i2c5 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2c5_pins>; > > + clock-frequency = <400000>; > > + status = "okay"; > > +}; > > + > > +&i2c6 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2c6_pins>; > > + clock-frequency = <400000>; > > + status = "okay"; > > +}; > > + > > +&mmc0 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc0_default_pins>; > > + pinctrl-1 = <&mmc0_uhs_pins>; > > + bus-width = <8>; > > + max-frequency = <200000000>; > > ...that's how it should be ordered: > > &mmc0 { > bus-width = <8>; > hs400-ds-delay = <0x1481b>; > max-frequency = <200000000>; > > cap-mmc-highspeed; > cap-mmc-hw-reset; > mmc-hs200-1_8v; > mmc-hs400-1_8v; > no-sdio; > no-sd; > non-removable; > > vmmc-supply = ... > vqmmc-supply = ... > > pinctrl-0 ... > pinctrl-1 ... > pinctrl-names ... > > status = "okay"; > }; > > > + cap-mmc-highspeed; > > + mmc-hs200-1_8v; > > + mmc-hs400-1_8v; > > + supports-cqe; > > + cap-mmc-hw-reset; > > + no-sdio; > > + no-sd; > > + hs400-ds-delay = <0x1481b>; > > + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; > > + vqmmc-supply = <&mt6359_vufs_ldo_reg>; > > + non-removable; > > +}; > > + > > +&mt6359_vcore_buck_reg { > > + regulator-always-on; > > +}; > > + > > +&mt6359_vgpu11_buck_reg { > > + regulator-always-on; > > +}; > > + > > +&mt6359_vpu_buck_reg { > > + regulator-always-on; > > +}; > > + > > +&mt6359_vrf12_ldo_reg { > > + regulator-always-on; > > +}; > > + > > +&nor_flash { > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&nor_pins_default>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + flash@0 { > > + compatible = "jedec,spi-nor"; > > + reg = <0>; > > + spi-max-frequency = <52000000>; > > + }; > > +}; > > + > > +&pio { > > + adsp_uart_pins: adsp-uart-pins { > > + pins-adsp-uart { > > pins-tx-rx { > > > + pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>, > > + <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>; > > + }; > > + }; > > + > > ..snip.. > > > + > > + mmc0_uhs_pins: mmc0-uhs-pins { > > + pins-cmd-dat { > > + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, > > + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, > > + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, > > + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, > > + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, > > + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, > > + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, > > + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, > > + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; > > + input-enable; > > + drive-strength = <8>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins-clk { > > pins-clk-ds { > pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>, > <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; > drive-strength = <8>; > bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > }; > > ...that's shorter: both pins are anyway sharing the same drive > strength and bias. > > > + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; > > + drive-strength = <8>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins-ds { > > + pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; > > + drive-strength = <8>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins-rst { > > + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; > > + drive-strength = <8>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + }; > > + > > + nor_pins_default: nor-pins { > > + pins0 { > > pins-io-ck { > > > + pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>, > > + <PINMUX_GPIO125__FUNC_O_SPINOR_CK>, > > + <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>; > > + bias-pull-down; > > + }; > > + > > + pins1 { > > pins-io-cs { > > > + pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>, > > + <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>, > > + <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>; > > + bias-pull-up; > > + }; > > + }; > > + > > + spi0_pins: spi0-pins { > > + pins-spi { > > + pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>, > > + <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>, > > + <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>, > > + <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>; > > + bias-disable; > > + }; > > + }; > > + > > + spi1_pins: spi1-pins { > > + pins-spi { > > + pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>, > > + <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>, > > + <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>, > > + <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>; > > + bias-disable; > > + }; > > + }; > > + > > + spi2_pins: spi2-pins { > > + pins-spi { > > + pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>, > > + <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>, > > + <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>, > > + <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>; > > + bias-disable; > > + }; > > + }; > > + > > + uart0_pins: uart0-pins { > > + pins-uart0 { > > pins-rx-tx { > > > + pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>, > > + <PINMUX_GPIO32__FUNC_I1_URXD0>; > > + bias-pull-up; > > + }; > > + }; > > +}; > > + > > ..snip.. > > > diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi > > b/arch/arm64/boot/dts/mediatek/mt8188.dtsi > > new file mode 100644 > > index 000000000000..c5af32fb7e85 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi > > @@ -0,0 +1,949 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright (c) 2023 MediaTek Inc. > > + * > > + */ > > + > > +/dts-v1/; > > +#include <dt-bindings/clock/mediatek,mt8188-clk.h> > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > +#include <dt-bindings/interrupt-controller/irq.h> > > +#include <dt-bindings/phy/phy.h> > > +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> > > +#include <dt-bindings/power/mediatek,mt8188-power.h> > > + > > +/ { > > + compatible = "mediatek,mt8188"; > > + interrupt-parent = <&gic>; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + cpu0: cpu@0 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55"; > > + reg = <0x000>; > > + enable-method = "psci"; > > + clock-frequency = <2000000000>; > > + capacity-dmips-mhz = <282>; > > + cpu-idle-states = <&cpu_off_l &cluster_off_l>; > > + i-cache-size = <32768>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <128>; > > + d-cache-size = <32768>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <128>; > > + next-level-cache = <&l2_0>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu1: cpu@100 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55"; > > + reg = <0x100>; > > + enable-method = "psci"; > > + clock-frequency = <2000000000>; > > + capacity-dmips-mhz = <282>; > > + cpu-idle-states = <&cpu_off_l &cluster_off_l>; > > + i-cache-size = <32768>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <128>; > > + d-cache-size = <32768>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <128>; > > + next-level-cache = <&l2_0>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu2: cpu@200 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55"; > > + reg = <0x200>; > > + enable-method = "psci"; > > + clock-frequency = <2000000000>; > > + capacity-dmips-mhz = <282>; > > + cpu-idle-states = <&cpu_off_l &cluster_off_l>; > > + i-cache-size = <32768>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <128>; > > + d-cache-size = <32768>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <128>; > > + next-level-cache = <&l2_0>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu3: cpu@300 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55"; > > + reg = <0x300>; > > + enable-method = "psci"; > > + clock-frequency = <2000000000>; > > + capacity-dmips-mhz = <282>; > > + cpu-idle-states = <&cpu_off_l &cluster_off_l>; > > + i-cache-size = <32768>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <128>; > > + d-cache-size = <32768>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <128>; > > + next-level-cache = <&l2_0>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu4: cpu@400 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55"; > > + reg = <0x400>; > > + enable-method = "psci"; > > + clock-frequency = <2000000000>; > > + capacity-dmips-mhz = <282>; > > + cpu-idle-states = <&cpu_off_l &cluster_off_l>; > > + i-cache-size = <32768>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <128>; > > + d-cache-size = <32768>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <128>; > > + next-level-cache = <&l2_0>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu5: cpu@500 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55"; > > + reg = <0x500>; > > + enable-method = "psci"; > > + clock-frequency = <2000000000>; > > + capacity-dmips-mhz = <282>; > > + cpu-idle-states = <&cpu_off_l &cluster_off_l>; > > + i-cache-size = <32768>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <128>; > > + d-cache-size = <32768>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <128>; > > + next-level-cache = <&l2_0>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu6: cpu@600 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a78"; > > + reg = <0x600>; > > + enable-method = "psci"; > > + clock-frequency = <2600000000>; > > + capacity-dmips-mhz = <1024>; > > + cpu-idle-states = <&cpu_off_b &cluster_off_b>; > > + i-cache-size = <65536>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <256>; > > + d-cache-size = <65536>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <256>; > > + next-level-cache = <&l2_1>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu7: cpu@700 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a78"; > > + reg = <0x700>; > > + enable-method = "psci"; > > + clock-frequency = <2600000000>; > > + capacity-dmips-mhz = <1024>; > > + cpu-idle-states = <&cpu_off_b &cluster_off_b>; > > + i-cache-size = <65536>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <256>; > > + d-cache-size = <65536>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <256>; > > + next-level-cache = <&l2_1>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu-map { > > + cluster0 { > > + core0 { > > + cpu = <&cpu0>; > > + }; > > + > > + core1 { > > + cpu = <&cpu1>; > > + }; > > + > > + core2 { > > + cpu = <&cpu2>; > > + }; > > + > > + core3 { > > + cpu = <&cpu3>; > > + }; > > + > > + core4 { > > + cpu = <&cpu4>; > > + }; > > + > > + core5 { > > + cpu = <&cpu5>; > > + }; > > + > > + core6 { > > + cpu = <&cpu6>; > > + }; > > + > > + core7 { > > + cpu = <&cpu7>; > > + }; > > + }; > > + }; > > + > > + idle-states { > > + entry-method = "psci"; > > + > > + cpu_off_l: cpu-off-l { > > + compatible = "arm,idle-state"; > > + arm,psci-suspend-param = <0x00010000>; > > + local-timer-stop; > > + entry-latency-us = <50>; > > + exit-latency-us = <95>; > > + min-residency-us = <580>; > > + }; > > + > > + cpu_off_b: cpu-off-b { > > + compatible = "arm,idle-state"; > > + arm,psci-suspend-param = <0x00010000>; > > + local-timer-stop; > > + entry-latency-us = <45>; > > + exit-latency-us = <140>; > > + min-residency-us = <740>; > > + }; > > + > > + cluster_off_l: cluster-off-l { > > + compatible = "arm,idle-state"; > > + arm,psci-suspend-param = <0x01010010>; > > + local-timer-stop; > > + entry-latency-us = <55>; > > + exit-latency-us = <155>; > > + min-residency-us = <840>; > > + }; > > + > > + cluster_off_b: cluster-off-b { > > + compatible = "arm,idle-state"; > > + arm,psci-suspend-param = <0x01010010>; > > + local-timer-stop; > > + entry-latency-us = <50>; > > + exit-latency-us = <200>; > > + min-residency-us = <1000>; > > + }; > > + }; > > + > > + l2_0: l2-cache0 { > > + compatible = "cache"; > > + cache-level = <2>; > > NACK. You're not specifying the L2 cache correctly. > > Hint: the missing properties are > cache-size > cache-line-size > cache-sets > > > + next-level-cache = <&l3_0>; > > + cache-unified; > > + }; > > + > > + l2_1: l2-cache1 { > > + compatible = "cache"; > > + cache-level = <2>; > > Same here. Please properly define the L2 cache. > > > + next-level-cache = <&l3_0>; > > + cache-unified; > > + }; > > + > > + l3_0: l3-cache { > > + compatible = "cache"; > > And again. > > This SoC has 256KB L2 shared between the two A78 cores, 128KB L2 > shared > between the A55 cores, and 2MB of L3 cache shared across all. > > > + cache-level = <3>; > > + cache-unified; > > + }; > > + }; > > + > > + clk13m: oscillator-13m { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <13000000>; > > + clock-output-names = "clk13m"; > > + }; > > + > > + clk26m: oscillator-26m { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <26000000>; > > + clock-output-names = "clk26m"; > > + }; > > + > > + clk32k: oscillator-32k { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <32768>; > > + clock-output-names = "clk32k"; > > + }; > > + > > + pmu-a55 { > > + compatible = "arm,cortex-a55-pmu"; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH > > &ppi_cluster0>; > > + }; > > + > > + pmu-a78 { > > + compatible = "arm,cortex-a78-pmu"; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH > > &ppi_cluster1>; > > + }; > > Question: Is the ARM DSU PMU broken also on this SoC's TZ firmware?! Because of security concerns, the default configuration of the ARM trusted firmware does not include enabling the ARM DSU PMU. However, it is possible to add a patch to enable this feature. The patch https://crrev.com/c/4885752 has not been merged into TF-A yet. We are currently considering upstreaming it. In the next version, I will rectify the issues mentioned in the other comments. Thank you for your review. > > + > > + psci { > > + compatible = "arm,psci-1.0"; > > + method = "smc"; > > + }; > > + > > + timer: timer { > > + compatible = "arm,armv8-timer"; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, > > + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>, > > + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>, > > + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>; > > + clock-frequency = <13000000>; > > + }; > > + > > + soc { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + compatible = "simple-bus"; > > + ranges; > > + > > + gic: interrupt-controller@c000000 { > > + compatible = "arm,gic-v3"; > > + #interrupt-cells = <4>; > > + #redistributor-regions = <1>; > > + interrupt-parent = <&gic>; > > + interrupt-controller; > > + reg = <0 0x0c000000 0 0x40000>, > > + <0 0x0c040000 0 0x200000>; > > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; > > + > > + ppi-partitions { > > + ppi_cluster0: interrupt-partition-0 { > > + affinity = <&cpu0 &cpu1 &cpu2 > > &cpu3 &cpu4 &cpu5>; > > + }; > > + > > + ppi_cluster1: interrupt-partition-1 { > > + affinity = <&cpu6 &cpu7>; > > + }; > > + }; > > + }; > > + > > + topckgen: syscon@10000000 { > > + compatible = "mediatek,mt8188-topckgen", > > "syscon"; > > + reg = <0 0x10000000 0 0x1000>; > > + #clock-cells = <1>; > > + }; > > + > > + infracfg_ao: syscon@10001000 { > > + compatible = "mediatek,mt8188-infracfg-ao", > > "syscon"; > > + reg = <0 0x10001000 0 0x1000>; > > + #clock-cells = <1>; > > + }; > > + > > + pericfg: syscon@10003000 { > > + compatible = "mediatek,mt8188-pericfg", > > "syscon"; > > + reg = <0 0x10003000 0 0x1000>; > > + #clock-cells = <1>; > > + }; > > + > > + pio: pinctrl@10005000 { > > + compatible = "mediatek,mt8188-pinctrl"; > > + reg = <0 0x10005000 0 0x1000>, > > + <0 0x11c00000 0 0x1000>, > > + <0 0x11e10000 0 0x1000>, > > + <0 0x11e20000 0 0x1000>, > > + <0 0x11ea0000 0 0x1000>, > > + <0 0x1000b000 0 0x1000>; > > + reg-names = "iocfg0", "iocfg_rm", > > + "iocfg_lt", "iocfg_lm", "iocfg_rt", > > + "eint"; > > reg-names = "iocfg0", "iocfg_rm", "iocfg_lt", > "iocfg_lm", "iocfg_rt", "eint"; > > one less line :-) > > > + gpio-controller; > > + #gpio-cells = <2>; > > + gpio-ranges = <&pio 0 0 176>; > > + interrupt-controller; > > + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH > > 0>; > > + #interrupt-cells = <2>; > > + }; > > + > > + watchdog: watchdog@10007000 { > > + compatible = "mediatek,mt8188-wdt"; > > + mediatek,disable-extrst; > > + reg = <0 0x10007000 0 0x100>; > > mediatek,disable-extrst goes here. > > > + #reset-cells = <1>; > > + }; > > + > > + apmixedsys: syscon@1000c000 { > > + compatible = "mediatek,mt8188-apmixedsys", > > "syscon"; > > + reg = <0 0x1000c000 0 0x1000>; > > + #clock-cells = <1>; > > + }; > > + > > + systimer: timer@10017000 { > > + compatible = "mediatek,mt8188-timer", > > "mediatek,mt6765-timer"; > > + reg = <0 0x10017000 0 0x1000>; > > + reg-names = "sys_timer_base"; > > You don't need reg-names here but anyway, if you really want to keep > that, please > no underscores when possible. > > > + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH > > 0>; > > + clocks = <&clk13m>; > > + }; > > + > > Regards, > Angelo Regards, Jason
On 10/20/23 16:37, Jason-ch Chen (陳建豪) wrote: > Hi Angelo, > > On Thu, 2023-10-19 at 11:47 +0200, AngeloGioacchino Del Regno wrote: >> Il 19/10/23 09:54, Jason-ch Chen ha scritto: >>> From: jason-ch chen <Jason-ch.Chen@mediatek.com> >>> >>> MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6 >>> CA55 >>> and 2 CA78 cores. MT8188 share many HW IP with MT65xx series. >>> >>> We add basic chip support for MediaTek MT8188 on evaluation board. >>> >>> Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> >>> --- >>> arch/arm64/boot/dts/mediatek/Makefile | 1 + >>> arch/arm64/boot/dts/mediatek/mt8188-evb.dts | 388 ++++++++ >>> arch/arm64/boot/dts/mediatek/mt8188.dtsi | 949 >>> ++++++++++++++++++++ >>> 3 files changed, 1338 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8188-evb.dts >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8188.dtsi >>> >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile >>> b/arch/arm64/boot/dts/mediatek/Makefile >>> index e6e7592a3645..8900b939ed52 100644 >>> --- a/arch/arm64/boot/dts/mediatek/Makefile >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile >>> @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui- >>> krane-sku0.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts >>> b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts >>> new file mode 100644 >>> index 000000000000..773bf84cfb94 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts >>> @@ -0,0 +1,388 @@ >>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT) >>> +/* >>> + * Copyright (C) 2023 MediaTek Inc. >>> + */ >>> +/dts-v1/; >>> +#include "mt8188.dtsi" >>> +#include "mt6359.dtsi" >>> + >>> +/ { >>> + model = "MediaTek MT8188 evaluation board"; >>> + compatible = "mediatek,mt8188-evb", "mediatek,mt8188"; >>> + >>> + aliases { >>> + serial0 = &uart0; >>> + i2c0 = &i2c0; >>> + i2c1 = &i2c1; >>> + i2c2 = &i2c2; >>> + i2c3 = &i2c3; >>> + i2c4 = &i2c4; >>> + i2c5 = &i2c5; >>> + i2c6 = &i2c6; >>> + mmc0 = &mmc0; >>> + }; >>> + >>> + chosen: chosen { >>> + stdout-path = "serial0:115200n8"; >>> + }; >>> + >>> + memory@40000000 { >>> + device_type = "memory"; >>> + reg = <0 0x40000000 0 0x80000000>; >>> + }; >>> + >>> + reserved_memory: reserved-memory { >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + ranges; >>> + >>> + scp_mem_reserved: memory@50000000 { >>> + compatible = "shared-dma-pool"; >>> + reg = <0 0x50000000 0 0x2900000>; >>> + no-map; >>> + }; >>> + }; >>> +}; >>> + >>> +&auxadc { >>> + status = "okay"; >>> +}; >>> + >>> +&i2c0 { >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&i2c0_pins>; >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> +}; >>> + >>> +&i2c1 { >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&i2c1_pins>; >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> +}; >>> + >>> +&i2c2 { >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&i2c2_pins>; >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> +}; >>> + >>> +&i2c3 { >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&i2c3_pins>; >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> +}; >>> + >>> +&i2c4 { >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&i2c4_pins>; >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> +}; >>> + >>> +&i2c5 { >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&i2c5_pins>; >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> +}; >>> + >>> +&i2c6 { >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&i2c6_pins>; >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> +}; >>> + >>> +&mmc0 { >>> + status = "okay"; >>> + pinctrl-names = "default", "state_uhs"; >>> + pinctrl-0 = <&mmc0_default_pins>; >>> + pinctrl-1 = <&mmc0_uhs_pins>; >>> + bus-width = <8>; >>> + max-frequency = <200000000>; >> >> ...that's how it should be ordered: >> >> &mmc0 { >> bus-width = <8>; >> hs400-ds-delay = <0x1481b>; >> max-frequency = <200000000>; >> >> cap-mmc-highspeed; >> cap-mmc-hw-reset; >> mmc-hs200-1_8v; >> mmc-hs400-1_8v; >> no-sdio; >> no-sd; >> non-removable; >> >> vmmc-supply = ... >> vqmmc-supply = ... >> >> pinctrl-0 ... >> pinctrl-1 ... >> pinctrl-names ... >> >> status = "okay"; >> }; >> >>> + cap-mmc-highspeed; >>> + mmc-hs200-1_8v; >>> + mmc-hs400-1_8v; >>> + supports-cqe; >>> + cap-mmc-hw-reset; >>> + no-sdio; >>> + no-sd; >>> + hs400-ds-delay = <0x1481b>; >>> + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; >>> + vqmmc-supply = <&mt6359_vufs_ldo_reg>; >>> + non-removable; >>> +}; >>> + >>> +&mt6359_vcore_buck_reg { >>> + regulator-always-on; >>> +}; >>> + >>> +&mt6359_vgpu11_buck_reg { >>> + regulator-always-on; >>> +}; >>> + >>> +&mt6359_vpu_buck_reg { >>> + regulator-always-on; >>> +}; >>> + >>> +&mt6359_vrf12_ldo_reg { >>> + regulator-always-on; >>> +}; >>> + >>> +&nor_flash { >>> + status = "okay"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&nor_pins_default>; >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + flash@0 { >>> + compatible = "jedec,spi-nor"; >>> + reg = <0>; >>> + spi-max-frequency = <52000000>; >>> + }; >>> +}; >>> + >>> +&pio { >>> + adsp_uart_pins: adsp-uart-pins { >>> + pins-adsp-uart { >> >> pins-tx-rx { >> >>> + pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>, >>> + <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>; >>> + }; >>> + }; >>> + >> >> ..snip.. >> >>> + >>> + mmc0_uhs_pins: mmc0-uhs-pins { >>> + pins-cmd-dat { >>> + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, >>> + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, >>> + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, >>> + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, >>> + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, >>> + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, >>> + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, >>> + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, >>> + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; >>> + input-enable; >>> + drive-strength = <8>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; >>> + }; >>> + >>> + pins-clk { >> >> pins-clk-ds { >> pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>, >> <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; >> drive-strength = <8>; >> bias-pull-down = <MTK_PUPD_SET_R1R0_10>; >> }; >> >> ...that's shorter: both pins are anyway sharing the same drive >> strength and bias. >> >>> + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; >>> + drive-strength = <8>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins-ds { >>> + pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; >>> + drive-strength = <8>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins-rst { >>> + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; >>> + drive-strength = <8>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; >>> + }; >>> + }; >>> + >>> + nor_pins_default: nor-pins { >>> + pins0 { >> >> pins-io-ck { >> >>> + pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>, >>> + <PINMUX_GPIO125__FUNC_O_SPINOR_CK>, >>> + <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>; >>> + bias-pull-down; >>> + }; >>> + >>> + pins1 { >> >> pins-io-cs { >> >>> + pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>, >>> + <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>, >>> + <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + spi0_pins: spi0-pins { >>> + pins-spi { >>> + pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>, >>> + <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>, >>> + <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>, >>> + <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>; >>> + bias-disable; >>> + }; >>> + }; >>> + >>> + spi1_pins: spi1-pins { >>> + pins-spi { >>> + pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>, >>> + <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>, >>> + <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>, >>> + <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>; >>> + bias-disable; >>> + }; >>> + }; >>> + >>> + spi2_pins: spi2-pins { >>> + pins-spi { >>> + pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>, >>> + <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>, >>> + <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>, >>> + <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>; >>> + bias-disable; >>> + }; >>> + }; >>> + >>> + uart0_pins: uart0-pins { >>> + pins-uart0 { >> >> pins-rx-tx { >> >>> + pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>, >>> + <PINMUX_GPIO32__FUNC_I1_URXD0>; >>> + bias-pull-up; >>> + }; >>> + }; >>> +}; >>> + >> >> ..snip.. >> >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi >>> b/arch/arm64/boot/dts/mediatek/mt8188.dtsi >>> new file mode 100644 >>> index 000000000000..c5af32fb7e85 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi >>> @@ -0,0 +1,949 @@ >>> +// SPDX-License-Identifier: GPL-2.0+ >>> +/* >>> + * Copyright (c) 2023 MediaTek Inc. >>> + * >>> + */ >>> + >>> +/dts-v1/; >>> +#include <dt-bindings/clock/mediatek,mt8188-clk.h> >>> +#include <dt-bindings/interrupt-controller/arm-gic.h> >>> +#include <dt-bindings/interrupt-controller/irq.h> >>> +#include <dt-bindings/phy/phy.h> >>> +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> >>> +#include <dt-bindings/power/mediatek,mt8188-power.h> >>> + >>> +/ { >>> + compatible = "mediatek,mt8188"; >>> + interrupt-parent = <&gic>; >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + >>> + cpus { >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + cpu0: cpu@0 { >>> + device_type = "cpu"; >>> + compatible = "arm,cortex-a55"; >>> + reg = <0x000>; >>> + enable-method = "psci"; >>> + clock-frequency = <2000000000>; >>> + capacity-dmips-mhz = <282>; >>> + cpu-idle-states = <&cpu_off_l &cluster_off_l>; >>> + i-cache-size = <32768>; >>> + i-cache-line-size = <64>; >>> + i-cache-sets = <128>; >>> + d-cache-size = <32768>; >>> + d-cache-line-size = <64>; >>> + d-cache-sets = <128>; >>> + next-level-cache = <&l2_0>; >>> + #cooling-cells = <2>; >>> + }; >>> + >>> + cpu1: cpu@100 { >>> + device_type = "cpu"; >>> + compatible = "arm,cortex-a55"; >>> + reg = <0x100>; >>> + enable-method = "psci"; >>> + clock-frequency = <2000000000>; >>> + capacity-dmips-mhz = <282>; >>> + cpu-idle-states = <&cpu_off_l &cluster_off_l>; >>> + i-cache-size = <32768>; >>> + i-cache-line-size = <64>; >>> + i-cache-sets = <128>; >>> + d-cache-size = <32768>; >>> + d-cache-line-size = <64>; >>> + d-cache-sets = <128>; >>> + next-level-cache = <&l2_0>; >>> + #cooling-cells = <2>; >>> + }; >>> + >>> + cpu2: cpu@200 { >>> + device_type = "cpu"; >>> + compatible = "arm,cortex-a55"; >>> + reg = <0x200>; >>> + enable-method = "psci"; >>> + clock-frequency = <2000000000>; >>> + capacity-dmips-mhz = <282>; >>> + cpu-idle-states = <&cpu_off_l &cluster_off_l>; >>> + i-cache-size = <32768>; >>> + i-cache-line-size = <64>; >>> + i-cache-sets = <128>; >>> + d-cache-size = <32768>; >>> + d-cache-line-size = <64>; >>> + d-cache-sets = <128>; >>> + next-level-cache = <&l2_0>; >>> + #cooling-cells = <2>; >>> + }; >>> + >>> + cpu3: cpu@300 { >>> + device_type = "cpu"; >>> + compatible = "arm,cortex-a55"; >>> + reg = <0x300>; >>> + enable-method = "psci"; >>> + clock-frequency = <2000000000>; >>> + capacity-dmips-mhz = <282>; >>> + cpu-idle-states = <&cpu_off_l &cluster_off_l>; >>> + i-cache-size = <32768>; >>> + i-cache-line-size = <64>; >>> + i-cache-sets = <128>; >>> + d-cache-size = <32768>; >>> + d-cache-line-size = <64>; >>> + d-cache-sets = <128>; >>> + next-level-cache = <&l2_0>; >>> + #cooling-cells = <2>; >>> + }; >>> + >>> + cpu4: cpu@400 { >>> + device_type = "cpu"; >>> + compatible = "arm,cortex-a55"; >>> + reg = <0x400>; >>> + enable-method = "psci"; >>> + clock-frequency = <2000000000>; >>> + capacity-dmips-mhz = <282>; >>> + cpu-idle-states = <&cpu_off_l &cluster_off_l>; >>> + i-cache-size = <32768>; >>> + i-cache-line-size = <64>; >>> + i-cache-sets = <128>; >>> + d-cache-size = <32768>; >>> + d-cache-line-size = <64>; >>> + d-cache-sets = <128>; >>> + next-level-cache = <&l2_0>; >>> + #cooling-cells = <2>; >>> + }; >>> + >>> + cpu5: cpu@500 { >>> + device_type = "cpu"; >>> + compatible = "arm,cortex-a55"; >>> + reg = <0x500>; >>> + enable-method = "psci"; >>> + clock-frequency = <2000000000>; >>> + capacity-dmips-mhz = <282>; >>> + cpu-idle-states = <&cpu_off_l &cluster_off_l>; >>> + i-cache-size = <32768>; >>> + i-cache-line-size = <64>; >>> + i-cache-sets = <128>; >>> + d-cache-size = <32768>; >>> + d-cache-line-size = <64>; >>> + d-cache-sets = <128>; >>> + next-level-cache = <&l2_0>; >>> + #cooling-cells = <2>; >>> + }; >>> + >>> + cpu6: cpu@600 { >>> + device_type = "cpu"; >>> + compatible = "arm,cortex-a78"; >>> + reg = <0x600>; >>> + enable-method = "psci"; >>> + clock-frequency = <2600000000>; >>> + capacity-dmips-mhz = <1024>; >>> + cpu-idle-states = <&cpu_off_b &cluster_off_b>; >>> + i-cache-size = <65536>; >>> + i-cache-line-size = <64>; >>> + i-cache-sets = <256>; >>> + d-cache-size = <65536>; >>> + d-cache-line-size = <64>; >>> + d-cache-sets = <256>; >>> + next-level-cache = <&l2_1>; >>> + #cooling-cells = <2>; >>> + }; >>> + >>> + cpu7: cpu@700 { >>> + device_type = "cpu"; >>> + compatible = "arm,cortex-a78"; >>> + reg = <0x700>; >>> + enable-method = "psci"; >>> + clock-frequency = <2600000000>; >>> + capacity-dmips-mhz = <1024>; >>> + cpu-idle-states = <&cpu_off_b &cluster_off_b>; >>> + i-cache-size = <65536>; >>> + i-cache-line-size = <64>; >>> + i-cache-sets = <256>; >>> + d-cache-size = <65536>; >>> + d-cache-line-size = <64>; >>> + d-cache-sets = <256>; >>> + next-level-cache = <&l2_1>; >>> + #cooling-cells = <2>; >>> + }; >>> + >>> + cpu-map { >>> + cluster0 { >>> + core0 { >>> + cpu = <&cpu0>; >>> + }; >>> + >>> + core1 { >>> + cpu = <&cpu1>; >>> + }; >>> + >>> + core2 { >>> + cpu = <&cpu2>; >>> + }; >>> + >>> + core3 { >>> + cpu = <&cpu3>; >>> + }; >>> + >>> + core4 { >>> + cpu = <&cpu4>; >>> + }; >>> + >>> + core5 { >>> + cpu = <&cpu5>; >>> + }; >>> + >>> + core6 { >>> + cpu = <&cpu6>; >>> + }; >>> + >>> + core7 { >>> + cpu = <&cpu7>; >>> + }; >>> + }; >>> + }; >>> + >>> + idle-states { >>> + entry-method = "psci"; >>> + >>> + cpu_off_l: cpu-off-l { >>> + compatible = "arm,idle-state"; >>> + arm,psci-suspend-param = <0x00010000>; >>> + local-timer-stop; >>> + entry-latency-us = <50>; >>> + exit-latency-us = <95>; >>> + min-residency-us = <580>; >>> + }; >>> + >>> + cpu_off_b: cpu-off-b { >>> + compatible = "arm,idle-state"; >>> + arm,psci-suspend-param = <0x00010000>; >>> + local-timer-stop; >>> + entry-latency-us = <45>; >>> + exit-latency-us = <140>; >>> + min-residency-us = <740>; >>> + }; >>> + >>> + cluster_off_l: cluster-off-l { >>> + compatible = "arm,idle-state"; >>> + arm,psci-suspend-param = <0x01010010>; >>> + local-timer-stop; >>> + entry-latency-us = <55>; >>> + exit-latency-us = <155>; >>> + min-residency-us = <840>; >>> + }; >>> + >>> + cluster_off_b: cluster-off-b { >>> + compatible = "arm,idle-state"; >>> + arm,psci-suspend-param = <0x01010010>; >>> + local-timer-stop; >>> + entry-latency-us = <50>; >>> + exit-latency-us = <200>; >>> + min-residency-us = <1000>; >>> + }; >>> + }; >>> + >>> + l2_0: l2-cache0 { >>> + compatible = "cache"; >>> + cache-level = <2>; >> >> NACK. You're not specifying the L2 cache correctly. >> >> Hint: the missing properties are >> cache-size >> cache-line-size >> cache-sets >> >>> + next-level-cache = <&l3_0>; >>> + cache-unified; >>> + }; >>> + >>> + l2_1: l2-cache1 { >>> + compatible = "cache"; >>> + cache-level = <2>; >> >> Same here. Please properly define the L2 cache. >> >>> + next-level-cache = <&l3_0>; >>> + cache-unified; >>> + }; >>> + >>> + l3_0: l3-cache { >>> + compatible = "cache"; >> >> And again. >> >> This SoC has 256KB L2 shared between the two A78 cores, 128KB L2 >> shared >> between the A55 cores, and 2MB of L3 cache shared across all. >> >>> + cache-level = <3>; >>> + cache-unified; >>> + }; >>> + }; >>> + >>> + clk13m: oscillator-13m { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + clock-frequency = <13000000>; >>> + clock-output-names = "clk13m"; >>> + }; >>> + >>> + clk26m: oscillator-26m { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + clock-frequency = <26000000>; >>> + clock-output-names = "clk26m"; >>> + }; >>> + >>> + clk32k: oscillator-32k { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + clock-frequency = <32768>; >>> + clock-output-names = "clk32k"; >>> + }; >>> + >>> + pmu-a55 { >>> + compatible = "arm,cortex-a55-pmu"; >>> + interrupt-parent = <&gic>; >>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH >>> &ppi_cluster0>; >>> + }; >>> + >>> + pmu-a78 { >>> + compatible = "arm,cortex-a78-pmu"; >>> + interrupt-parent = <&gic>; >>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH >>> &ppi_cluster1>; >>> + }; >> >> Question: Is the ARM DSU PMU broken also on this SoC's TZ firmware?! > > Because of security concerns, the default configuration of the ARM > trusted firmware does not include enabling the ARM DSU PMU. > > However, it is possible to add a patch to enable this feature. The > patch https://crrev.com/c/4885752 has not been merged into TF-A yet. > We are currently considering upstreaming it. > MediaTek IOT is working on the very latest Ubuntu and Suse installation but encountered this problem, too. I've tested this patch 'https://crrev.com/c/4885752' but it seems just not working and we still encounter the same problem before we disable arm_dsu_pmu module. IOT uses trusted-firmware a v2.6 currently, however I think this solution is the very common code should be able to applied to v2.6~v2.8. After tested the patch, we still got the same error log with repeated msdc request timeout. [ 27.998999][ T52] mtk-msdc 11230000.mmc: msdc_request_timeout: aborting cmd/data/mrq [ 28.000003][ T52] mtk-msdc 11230000.mmc: msdc_request_timeout: aborting mrq=(____ptrval____) cmd=12 [ 28.001164][ T52] mtk-msdc 11230000.mmc: msdc_request_timeout: aborting cmd=1 Then sometimes we got these logs maybe caused by arm_dsu_pmu. [ 32.016701][ C5] Modules linked in: arm_dsu_pmu(+) tee uio_pdrv_genirq uio fuse efi_pstore dmi_sysfs ip_tables x_tables mmc_block mt6360_regulator mt6360_charger mt6359_regulator mt6360_core rtc_mt6397 clk_mt8195_vdo1 clk_mt8195_vdo0 clk_mt8195_vpp1 clk_mt8195_vpp0 mt6397 aes_ce_blk aes_ce_cipher crct10dif_ce polyval_ce polyval_generic ghash_ce gf128mul sm4 sha2_ce sha256_arm64 sha1_ce phy_mtk_tphy xhci_mtk_hcd xhci_hcd mediatek_drm clk_mt8195_apusys_pll clk_mt8195_venc clk_mt8195_vdec clk_mt8195_ccu clk_mt8195_cam mtk_sd usbcore clk_mt8195_ipe nvmem_mtk_efuse mtk_mutex cqhci mtk_mmsys clk_mt8195_wpe clk_mt8195_img usb_common mtk_cmdq_helper mmc_core mtk_cmdq_mailbox clk_mt8195_mfg clk_mt8195_imp_iic_wrap i2c_mt65xx clk_mt8195_scp_adsp mtk_adsp_mailbox mtk_pmic_wrap mtk_wdt gpio_keys btrfs blake2b_generic libcrc32c xor xor_neon zlib_deflate raid6_pq sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod scsi_common efivarfs [ 32.027269][ C5] CPU: 5 PID: 568 Comm: (udev-worker) Tainted: G D 6.5.6-1-default #1 openSUSE Tumbleweed 38b4d9532851795bcba8386ef05b62c1f3d07352 [ 32.029120][ C5] Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2022.10 10/01/2022 [ 32.030258][ C5] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 32.031224][ C5] pc : smp_call_function_many_cond+0x164/0x5e8 [ 32.031989][ C5] lr : smp_call_function_many_cond+0x124/0x5e8 [ 32.032747][ C5] sp : ffff80008399b9d0 [ 32.033254][ C5] x29: ffff80008399b9d0 x28: 0000000000000000 x27: 0000000000000005 [ 32.034246][ C5] x26: ffff0001fef735c0 x25: 0000000000000008 x24: ffff80008284edc0 [ 32.035236][ C5] x23: 0000000000000000 x22: ffff80008021e010 x21: ffff800082852f68 [ 32.036225][ C5] x20: ffff0001fef2e780 x19: ffff0001fef2e788 x18: 0000000000000000 [ 32.037213][ C5] x17: 65645f6166660000 x16: 7265747369676572 x15: 65675f6363636d73 [ 32.038202][ C5] x14: 1b124f16170a1e12 x13: 0000000000000003 x12: 4444334144323643 [ 32.039191][ C5] x11: 0101010101010101 x10: 00000000023ff788 x9 : ffff800080763918 [ 32.040181][ C5] x8 : ffff0001fef2e7d0 x7 : 0000000000000007 x6 : 00000000000000ff [ 32.041169][ C5] x5 : ffff80008284e000 x4 : 0000000000000000 x3 : ffff0001fee935c8 [ 32.042159][ C5] x2 : 0000000000000000 x1 : 0000000000000011 x0 : 0000000000000000 [ 32.043148][ C5] Call trace: [ 32.043548][ C5] smp_call_function_many_cond+0x164/0x5e8 [ 32.044264][ C5] kick_all_cpus_sync+0x4c/0x80 [ 32.044859][ C5] load_module+0x1e64/0x25c8 [ 32.045427][ C5] __do_sys_init_module+0x324/0x388 [ 32.046069][ C5] __arm64_sys_init_module+0x24/0x38 [ 32.046722][ C5] invoke_syscall+0x78/0x100 [ 32.047286][ C5] el0_svc_common.constprop.0+0x100/0x130 [ 32.047989][ C5] do_el0_svc+0x40/0xa8 [ 32.048497][ C5] el0_svc+0x34/0x138 [ 32.048986][ C5] el0t_64_sync_handler+0x120/0x130 [ 32.049626][ C5] el0t_64_sync+0x1a8/0x1b0 The only solution I've tested working is which I've posted before when discussion set 'arm_dsu_pmu' to 'fail' in mt8195.dtsi. https://lore.kernel.org/linux-arm-kernel/1c639f51-a444-c8c8-8585-2e413243c3a6@collabora.com/T/#md1556b50c2fea38e5d0163decfd0768b331737b0 Hope this test result will help. > In the next version, I will rectify the issues mentioned in the other > comments. Thank you for your review. > >>> + >>> + psci { >>> + compatible = "arm,psci-1.0"; >>> + method = "smc"; >>> + }; >>> + >>> + timer: timer { >>> + compatible = "arm,armv8-timer"; >>> + interrupt-parent = <&gic>; >>> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, >>> + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>, >>> + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>, >>> + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>; >>> + clock-frequency = <13000000>; >>> + }; >>> + >>> + soc { >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + compatible = "simple-bus"; >>> + ranges; >>> + >>> + gic: interrupt-controller@c000000 { >>> + compatible = "arm,gic-v3"; >>> + #interrupt-cells = <4>; >>> + #redistributor-regions = <1>; >>> + interrupt-parent = <&gic>; >>> + interrupt-controller; >>> + reg = <0 0x0c000000 0 0x40000>, >>> + <0 0x0c040000 0 0x200000>; >>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; >>> + >>> + ppi-partitions { >>> + ppi_cluster0: interrupt-partition-0 { >>> + affinity = <&cpu0 &cpu1 &cpu2 >>> &cpu3 &cpu4 &cpu5>; >>> + }; >>> + >>> + ppi_cluster1: interrupt-partition-1 { >>> + affinity = <&cpu6 &cpu7>; >>> + }; >>> + }; >>> + }; >>> + >>> + topckgen: syscon@10000000 { >>> + compatible = "mediatek,mt8188-topckgen", >>> "syscon"; >>> + reg = <0 0x10000000 0 0x1000>; >>> + #clock-cells = <1>; >>> + }; >>> + >>> + infracfg_ao: syscon@10001000 { >>> + compatible = "mediatek,mt8188-infracfg-ao", >>> "syscon"; >>> + reg = <0 0x10001000 0 0x1000>; >>> + #clock-cells = <1>; >>> + }; >>> + >>> + pericfg: syscon@10003000 { >>> + compatible = "mediatek,mt8188-pericfg", >>> "syscon"; >>> + reg = <0 0x10003000 0 0x1000>; >>> + #clock-cells = <1>; >>> + }; >>> + >>> + pio: pinctrl@10005000 { >>> + compatible = "mediatek,mt8188-pinctrl"; >>> + reg = <0 0x10005000 0 0x1000>, >>> + <0 0x11c00000 0 0x1000>, >>> + <0 0x11e10000 0 0x1000>, >>> + <0 0x11e20000 0 0x1000>, >>> + <0 0x11ea0000 0 0x1000>, >>> + <0 0x1000b000 0 0x1000>; >>> + reg-names = "iocfg0", "iocfg_rm", >>> + "iocfg_lt", "iocfg_lm", "iocfg_rt", >>> + "eint"; >> >> reg-names = "iocfg0", "iocfg_rm", "iocfg_lt", >> "iocfg_lm", "iocfg_rt", "eint"; >> >> one less line :-) >> >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + gpio-ranges = <&pio 0 0 176>; >>> + interrupt-controller; >>> + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH >>> 0>; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + watchdog: watchdog@10007000 { >>> + compatible = "mediatek,mt8188-wdt"; >>> + mediatek,disable-extrst; >>> + reg = <0 0x10007000 0 0x100>; >> >> mediatek,disable-extrst goes here. >> >>> + #reset-cells = <1>; >>> + }; >>> + >>> + apmixedsys: syscon@1000c000 { >>> + compatible = "mediatek,mt8188-apmixedsys", >>> "syscon"; >>> + reg = <0 0x1000c000 0 0x1000>; >>> + #clock-cells = <1>; >>> + }; >>> + >>> + systimer: timer@10017000 { >>> + compatible = "mediatek,mt8188-timer", >>> "mediatek,mt6765-timer"; >>> + reg = <0 0x10017000 0 0x1000>; >>> + reg-names = "sys_timer_base"; >> >> You don't need reg-names here but anyway, if you really want to keep >> that, please >> no underscores when possible. >> >>> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH >>> 0>; >>> + clocks = <&clk13m>; >>> + }; >>> + >> >> Regards, >> Angelo > > Regards, > Jason There's an another issue. Could you help to upstream USB port with mtu3 enabled. I've heard that the limitation for mtu3 and xhci port has be resolved for MT8188. If you could upstream mtu3 nodes in MT8188.dtsi that will help for testing mtu3 on all Chromebook platforms. Otherwise MediaTek IOT will need to upstream mtu3 nodes to MT8188.dtsi later but we have no Chromebook platforms to test. Thanks Macpaul Lin
Hi Macpaul, On Fri, 2023-10-20 at 18:49 +0800, Macpaul Lin wrote: > On 10/20/23 16:37, Jason-ch Chen (陳建豪) wrote: > > Hi Angelo, > > > > ..snip.. > > There's an another issue. > > Could you help to upstream USB port with mtu3 enabled. > I've heard that the limitation for mtu3 and xhci port has be > resolved > for MT8188. If you could upstream mtu3 nodes in MT8188.dtsi that > will > help for testing mtu3 on all Chromebook platforms. Otherwise > MediaTek > IOT will need to upstream mtu3 nodes to MT8188.dtsi later but we have > no > Chromebook platforms to test. > > Thanks > Macpaul Lin The main objective of this series is to submit basic DTS. There will be other features that will be developed and integrated based on this DTS after it is upstreamed. Your requirement can be addressed in future series. Thanks, Jason
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index e6e7592a3645..8900b939ed52 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts new file mode 100644 index 000000000000..773bf84cfb94 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 MediaTek Inc. + */ +/dts-v1/; +#include "mt8188.dtsi" +#include "mt6359.dtsi" + +/ { + model = "MediaTek MT8188 evaluation board"; + compatible = "mediatek,mt8188-evb", "mediatek,mt8188"; + + aliases { + serial0 = &uart0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + mmc0 = &mmc0; + }; + + chosen: chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scp_mem_reserved: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + }; +}; + +&auxadc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + supports-cqe; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x1481b>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + non-removable; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&nor_flash { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; +}; + +&pio { + adsp_uart_pins: adsp-uart-pins { + pins-adsp-uart { + pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>, + <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>; + }; + }; + + i2c0_pins: i2c0-pins { + pins-bus { + pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>, + <PINMUX_GPIO55__FUNC_B1_SCL0>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c1_pins: i2c1-pins { + pins-bus { + pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>, + <PINMUX_GPIO57__FUNC_B1_SCL1>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c2_pins: i2c2-pins { + pins-bus { + pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>, + <PINMUX_GPIO59__FUNC_B1_SCL2>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c3_pins: i2c3-pins { + pins-bus { + pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>, + <PINMUX_GPIO61__FUNC_B1_SCL3>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c4_pins: i2c4-pins { + pins-bus { + pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>, + <PINMUX_GPIO63__FUNC_B1_SCL4>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c5_pins: i2c5-pins { + pins-bus { + pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>, + <PINMUX_GPIO65__FUNC_B1_SCL5>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c6_pins: i2c6-pins { + pins-bus { + pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>, + <PINMUX_GPIO67__FUNC_B1_SCL6>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + nor_pins_default: nor-pins { + pins0 { + pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>, + <PINMUX_GPIO125__FUNC_O_SPINOR_CK>, + <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>; + bias-pull-down; + }; + + pins1 { + pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>, + <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>, + <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>; + bias-pull-up; + }; + }; + + spi0_pins: spi0-pins { + pins-spi { + pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>, + <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>, + <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>, + <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>; + bias-disable; + }; + }; + + spi1_pins: spi1-pins { + pins-spi { + pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>, + <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>, + <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>, + <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>; + bias-disable; + }; + }; + + spi2_pins: spi2-pins { + pins-spi { + pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>, + <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>, + <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>, + <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>; + bias-disable; + }; + }; + + uart0_pins: uart0-pins { + pins-uart0 { + pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>, + <PINMUX_GPIO32__FUNC_I1_URXD0>; + bias-pull-up; + }; + }; +}; + +&pmic { + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&scp { + memory-region = <&scp_mem_reserved>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + status = "okay"; +}; + +&xhci2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi new file mode 100644 index 000000000000..c5af32fb7e85 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi @@ -0,0 +1,949 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2023 MediaTek Inc. + * + */ + +/dts-v1/; +#include <dt-bindings/clock/mediatek,mt8188-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> +#include <dt-bindings/power/mediatek,mt8188-power.h> + +/ { + compatible = "mediatek,mt8188"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x000>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x200>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x300>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x400>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x500>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x600>; + enable-method = "psci"; + clock-frequency = <2600000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x700>; + enable-method = "psci"; + clock-frequency = <2600000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + + core5 { + cpu = <&cpu5>; + }; + + core6 { + cpu = <&cpu6>; + }; + + core7 { + cpu = <&cpu7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + cpu_off_l: cpu-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010000>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <95>; + min-residency-us = <580>; + }; + + cpu_off_b: cpu-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010000>; + local-timer-stop; + entry-latency-us = <45>; + exit-latency-us = <140>; + min-residency-us = <740>; + }; + + cluster_off_l: cluster-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010010>; + local-timer-stop; + entry-latency-us = <55>; + exit-latency-us = <155>; + min-residency-us = <840>; + }; + + cluster_off_b: cluster-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010010>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <200>; + min-residency-us = <1000>; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + next-level-cache = <&l3_0>; + cache-unified; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-level = <2>; + next-level-cache = <&l3_0>; + cache-unified; + }; + + l3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + + clk13m: oscillator-13m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <13000000>; + clock-output-names = "clk13m"; + }; + + clk26m: oscillator-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>; + }; + + pmu-a78 { + compatible = "arm,cortex-a78-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer: timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>; + clock-frequency = <13000000>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #redistributor-regions = <1>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x40000>, + <0 0x0c040000 0 0x200000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu6 &cpu7>; + }; + }; + }; + + topckgen: syscon@10000000 { + compatible = "mediatek,mt8188-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg_ao: syscon@10001000 { + compatible = "mediatek,mt8188-infracfg-ao", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt8188-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8188-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11c00000 0 0x1000>, + <0 0x11e10000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11ea0000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg_rm", + "iocfg_lt", "iocfg_lm", "iocfg_rt", + "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 176>; + interrupt-controller; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt8188-wdt"; + mediatek,disable-extrst; + reg = <0 0x10007000 0 0x100>; + #reset-cells = <1>; + }; + + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8188-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + systimer: timer@10017000 { + compatible = "mediatek,mt8188-timer", "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x1000>; + reg-names = "sys_timer_base"; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk13m>; + }; + + pwrap: pwrap@10024000 { + compatible = "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap", "syscon"; + reg = <0 0x10024000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>, + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>; + clock-names = "spi", "wrap"; + }; + + scp: scp@10500000 { + compatible = "mediatek,mt8188-scp"; + reg = <0 0x10500000 0 0x100000>, + <0 0x10720000 0 0xe0000>; + reg-names = "sram", "cfg"; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + adsp_audio26m: clock-controller@10b91100 { + compatible = "mediatek,mt8188-adsp-audio26m"; + reg = <0 0x10b91100 0 0x100>; + #clock-cells = <1>; + }; + + uart0: serial@11001100 { + compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart"; + reg = <0 0x11001100 0 0x100>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11001200 { + compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart"; + reg = <0 0x11001200 0 0x100>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11001300 { + compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart"; + reg = <0 0x11001300 0 0x100>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart3: serial@11001400 { + compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart"; + reg = <0 0x11001400 0 0x100>; + interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + auxadc: adc@11002000 { + compatible = "mediatek,mt8188-auxadc", "mediatek,mt8173-auxadc"; + reg = <0 0x11002000 0 0x1000>; + clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + pericfg_ao: syscon@11003000 { + compatible = "mediatek,mt8188-pericfg-ao", "syscon"; + reg = <0 0x11003000 0 0x1000>; + #clock-cells = <1>; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi1: spi@11010000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11010000 0 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11012000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11012000 0 0x1000>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11013000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11013000 0 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI3>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi4: spi@11018000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11018000 0 0x1000>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI4>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11019000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11019000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI5>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + xhci1: usb@11200000 { + compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port1 PHY_TYPE_USB2>, + <&u3port1 PHY_TYPE_USB3>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP>, + <&topckgen CLK_TOP_SSUSB_XHCI>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>, + <&topckgen CLK_TOP_SSUSB_TOP_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck"; + mediatek,syscon-wakeup = <&pericfg 0x468 2>; + wakeup-source; + status = "disabled"; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11230000 0 0x10000>, + <0 0x11f50000 0 0x1000>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MSDC50_0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>, + <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>; + clock-names = "source", "hclk", "source_cg", "crypto_clk"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11240000 0 0x1000>, + <0 0x11eb0000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MSDC30_1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>; + clock-names = "source", "hclk", "source_cg"; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + status = "disabled"; + }; + + i2c0: i2c@11280000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11280000 0 0x1000>, + <0 0x10220080 0 0x80>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C0>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11281000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11281000 0 0x1000>, + <0 0x10220180 0 0x80>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C2>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@11282000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11282000 0 0x1000>, + <0 0x10220280 0 0x80>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C3>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_c: clock-controller@11283000 { + compatible = "mediatek,mt8188-imp-iic-wrap-c"; + reg = <0 0x11283000 0 0x1000>; + #clock-cells = <1>; + }; + + xhci2: usb@112a0000 { + compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci"; + reg = <0 0x112a0000 0 0x1000>, + <0 0x112a3e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port2 PHY_TYPE_USB2>; + assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>, + <&topckgen CLK_TOP_USB_TOP_3P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>, + <&topckgen CLK_TOP_SSUSB_TOP_P3_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck"; + status = "disabled"; + }; + + xhci0: usb@112b0000 { + compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci"; + reg = <0 0x112b0000 0 0x1000>, + <0 0x112b3e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port0 PHY_TYPE_USB2>; + assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>, + <&topckgen CLK_TOP_USB_TOP_2P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>, + <&topckgen CLK_TOP_SSUSB_TOP_P2_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck"; + mediatek,syscon-wakeup = <&pericfg 0x460 2>; + wakeup-source; + status = "disabled"; + }; + + nor_flash: spi@1132c000 { + compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor"; + reg = <0 0x1132c000 0 0x1000>; + clocks = <&topckgen CLK_TOP_SPINOR>, + <&pericfg_ao CLK_PERI_AO_FLASHIFLASHCK>, + <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>; + clock-names = "spi", "sf", "axi"; + assigned-clocks = <&topckgen CLK_TOP_SPINOR>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + }; + + i2c1: i2c@11e00000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11e00000 0 0x1000>, + <0 0x10220100 0 0x80>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C1>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11e01000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11e01000 0 0x1000>, + <0 0x10220380 0 0x80>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C4>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_w: clock-controller@11e02000 { + compatible = "mediatek,mt8188-imp-iic-wrap-w"; + reg = <0 0x11e02000 0 0x1000>; + #clock-cells = <1>; + }; + + u3phy0: t-phy@11e30000 { + compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11e30000 0x1000>; + status = "disabled"; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>, + <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + + u3phy1: t-phy@11e40000 { + compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11e40000 0x1000>; + status = "disabled"; + + u2port1: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>, + <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u3port1: usb-phy@700 { + reg = <0x700 0x700>; + clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>, + <&clk26m>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + status = "disabled"; + }; + }; + + u3phy2: t-phy@11e80000 { + compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11e80000 0x1000>; + status = "disabled"; + + u2port2: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>, + <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + + i2c5: i2c@11ec0000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11ec0000 0 0x1000>, + <0 0x10220480 0 0x80>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C5>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@11ec1000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11ec1000 0 0x1000>, + <0 0x10220600 0 0x80>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C6>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_en: clock-controller@11ec2000 { + compatible = "mediatek,mt8188-imp-iic-wrap-en"; + reg = <0 0x11ec2000 0 0x1000>; + #clock-cells = <1>; + }; + + mfgcfg: clock-controller@13fbf000 { + compatible = "mediatek,mt8188-mfgcfg"; + reg = <0 0x13fbf000 0 0x1000>; + #clock-cells = <1>; + }; + + vppsys0: clock-controller@14000000 { + compatible = "mediatek,mt8188-vppsys0"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + wpesys: clock-controller@14e00000 { + compatible = "mediatek,mt8188-wpesys"; + reg = <0 0x14e00000 0 0x1000>; + #clock-cells = <1>; + }; + + wpesys_vpp0: clock-controller@14e02000 { + compatible = "mediatek,mt8188-wpesys-vpp0"; + reg = <0 0x14e02000 0 0x1000>; + #clock-cells = <1>; + }; + + vppsys1: clock-controller@14f00000 { + compatible = "mediatek,mt8188-vppsys1"; + reg = <0 0x14f00000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: clock-controller@15000000 { + compatible = "mediatek,mt8188-imgsys"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1_dip_top: clock-controller@15110000 { + compatible = "mediatek,mt8188-imgsys1-dip-top"; + reg = <0 0x15110000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1_dip_nr: clock-controller@15130000 { + compatible = "mediatek,mt8188-imgsys1-dip-nr"; + reg = <0 0x15130000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys_wpe1: clock-controller@15220000 { + compatible = "mediatek,mt8188-imgsys-wpe1"; + reg = <0 0x15220000 0 0x1000>; + #clock-cells = <1>; + }; + + ipesys: clock-controller@15330000 { + compatible = "mediatek,mt8188-ipesys"; + reg = <0 0x15330000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys_wpe2: clock-controller@15520000 { + compatible = "mediatek,mt8188-imgsys-wpe2"; + reg = <0 0x15520000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys_wpe3: clock-controller@15620000 { + compatible = "mediatek,mt8188-imgsys-wpe3"; + reg = <0 0x15620000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: clock-controller@16000000 { + compatible = "mediatek,mt8188-camsys"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawa: clock-controller@1604f000 { + compatible = "mediatek,mt8188-camsys-rawa"; + reg = <0 0x1604f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_yuva: clock-controller@1606f000 { + compatible = "mediatek,mt8188-camsys-yuva"; + reg = <0 0x1606f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawb: clock-controller@1608f000 { + compatible = "mediatek,mt8188-camsys-rawb"; + reg = <0 0x1608f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_yuvb: clock-controller@160af000 { + compatible = "mediatek,mt8188-camsys-yuvb"; + reg = <0 0x160af000 0 0x1000>; + #clock-cells = <1>; + }; + + ccusys: clock-controller@17200000 { + compatible = "mediatek,mt8188-ccusys"; + reg = <0 0x17200000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys_soc: clock-controller@1800f000 { + compatible = "mediatek,mt8188-vdecsys-soc"; + reg = <0 0x1800f000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@1802f000 { + compatible = "mediatek,mt8188-vdecsys"; + reg = <0 0x1802f000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@1a000000 { + compatible = "mediatek,mt8188-vencsys"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + }; +};