diff mbox series

[v3,06/17] dt-bindings: display: mediatek: dpi: add power-domains property

Message ID 20231023-display-support-v3-6-53388f3ed34b@baylibre.com (mailing list archive)
State New, archived
Headers show
Series Add display support for the MT8365-EVK board | expand

Commit Message

Alexandre Mergnat April 18, 2024, 2:16 p.m. UTC 
From: Fabien Parent <fparent@baylibre.com>

DPI is part of the display / multimedia block in MediaTek SoCs, and
always have a power-domain (at least in the upstream device-trees).
Add the power-domains property to the binding documentation.

Fixes: 9273cf7d3942 ("dt-bindings: display: mediatek: convert the dpi bindings to yaml")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index 803c00f26206..e126486e8eac 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -64,6 +64,9 @@  properties:
       Output port node. This port should be connected to the input port of an
       attached HDMI, LVDS or DisplayPort encoder chip.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -78,11 +81,13 @@  examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
 
     dpi0: dpi@1401d000 {
         compatible = "mediatek,mt8173-dpi";
         reg = <0x1401d000 0x1000>;
         interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+        power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
         clocks = <&mmsys CLK_MM_DPI_PIXEL>,
              <&mmsys CLK_MM_DPI_ENGINE>,
              <&apmixedsys CLK_APMIXED_TVDPLL>;