| Message ID | 20231023081423.18559-1-jianjun.wang@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] PCI: mediatek-gen3: Fix translation window | expand |
Il 23/10/23 10:14, Jianjun Wang ha scritto: > The size of translation table should be a power of 2, using fls() > cannot get the proper value when the size is not a power of 2. For > example, fls(0x3e00000) - 1 = 25, hence the PCIe translation window > size will be set to 0x2000000 instead of the expected size 0x3e00000. > > Fix translation window by splitting the MMIO space to multiple tables if > its size is not a power of 2. > > Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192") > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Hi Maintainers, Gentle ping for this patch, if there is anything I need to do, please let me know. Thanks. On Mon, 2023-10-23 at 16:14 +0800, Jianjun Wang wrote: > The size of translation table should be a power of 2, using fls() > cannot get the proper value when the size is not a power of 2. For > example, fls(0x3e00000) - 1 = 25, hence the PCIe translation window > size will be set to 0x2000000 instead of the expected size 0x3e00000. > > Fix translation window by splitting the MMIO space to multiple tables > if > its size is not a power of 2. > > Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver > for MT8192") > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> > > --- > Changes in v2: > Only print warning message when reach the maximum translation table > number, the MEM space still works but will be smaller than expected. > > Bootup logs on MT8195 Platform: > > > Before this patch: > > mtk-pcie-gen3 112f0000.pcie: Parsing ranges property... > mtk-pcie-gen3 112f0000.pcie: IO 0x0020000000..0x00201fffff -> > 0x0020000000 > mtk-pcie-gen3 112f0000.pcie: MEM 0x0020200000..0x0023ffffff -> > 0x0020200000 > mtk-pcie-gen3 112f0000.pcie: set IO trans window[0]: cpu_addr = > 0x20000000, pci_addr = 0x20000000, size = 0x200000 > mtk-pcie-gen3 112f0000.pcie: set MEM trans window[1]: cpu_addr = > 0x20200000, pci_addr = 0x20200000, size = 0x3e00000 > > > We expect the MEM trans window size to be 0x3e00000, but its actual > > available size is 0x2000000. > > After applying this patch: > > mtk-pcie-gen3 112f0000.pcie: Parsing ranges property... > mtk-pcie-gen3 112f0000.pcie: IO 0x0020000000..0x00201fffff -> > 0x0020000000 > mtk-pcie-gen3 112f0000.pcie: MEM 0x0020200000..0x0023ffffff -> > 0x0020200000 > mtk-pcie-gen3 112f0000.pcie: set IO trans window[0]: cpu_addr = > 0x20000000, pci_addr = 0x20000000, size = 0x200000 > mtk-pcie-gen3 112f0000.pcie: set MEM trans window[1]: cpu_addr = > 0x20200000, pci_addr = 0x20200000, size = 0x200000 > mtk-pcie-gen3 112f0000.pcie: set MEM trans window[2]: cpu_addr = > 0x20400000, pci_addr = 0x20400000, size = 0x400000 > mtk-pcie-gen3 112f0000.pcie: set MEM trans window[3]: cpu_addr = > 0x20800000, pci_addr = 0x20800000, size = 0x800000 > mtk-pcie-gen3 112f0000.pcie: set MEM trans window[4]: cpu_addr = > 0x21000000, pci_addr = 0x21000000, size = 0x1000000 > mtk-pcie-gen3 112f0000.pcie: set MEM trans window[5]: cpu_addr = > 0x22000000, pci_addr = 0x22000000, size = 0x2000000 > > > Total available size for MEM trans window is 0x3e00000. > > --- > --- > drivers/pci/controller/pcie-mediatek-gen3.c | 85 ++++++++++++------- > -- > 1 file changed, 50 insertions(+), 35 deletions(-) > > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c > b/drivers/pci/controller/pcie-mediatek-gen3.c > index e0e27645fdf4..975b3024fb08 100644 > --- a/drivers/pci/controller/pcie-mediatek-gen3.c > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c > @@ -245,35 +245,60 @@ static int mtk_pcie_set_trans_table(struct > mtk_gen3_pcie *pcie, > resource_size_t cpu_addr, > resource_size_t pci_addr, > resource_size_t size, > - unsigned long type, int num) > + unsigned long type, int *num) > { > + resource_size_t remaining = size; > + resource_size_t table_size; > + resource_size_t addr_align; > + const char *range_type; > void __iomem *table; > u32 val; > > - if (num >= PCIE_MAX_TRANS_TABLES) { > - dev_err(pcie->dev, "not enough translate table for > addr: %#llx, limited to [%d]\n", > - (unsigned long long)cpu_addr, > PCIE_MAX_TRANS_TABLES); > - return -ENODEV; > - } > + while (remaining && (*num < PCIE_MAX_TRANS_TABLES)) { > + /* Table size needs to be a power of 2 */ > + table_size = BIT(fls(remaining) - 1); > + > + if (cpu_addr > 0) { > + addr_align = BIT(ffs(cpu_addr) - 1); > + table_size = min(table_size, addr_align); > + } > + > + /* Minimum size of translate table is 4KiB */ > + if (table_size < 0x1000) { > + dev_err(pcie->dev, "illegal table size > %#llx\n", > + (unsigned long long)table_size); > + return -EINVAL; > + } > > - table = pcie->base + PCIE_TRANS_TABLE_BASE_REG + > - num * PCIE_ATR_TLB_SET_OFFSET; > + table = pcie->base + PCIE_TRANS_TABLE_BASE_REG + *num * > PCIE_ATR_TLB_SET_OFFSET; > + writel_relaxed(lower_32_bits(cpu_addr) | > PCIE_ATR_SIZE(fls(table_size) - 1), table); > + writel_relaxed(upper_32_bits(cpu_addr), table + > PCIE_ATR_SRC_ADDR_MSB_OFFSET); > + writel_relaxed(lower_32_bits(pci_addr), table + > PCIE_ATR_TRSL_ADDR_LSB_OFFSET); > + writel_relaxed(upper_32_bits(pci_addr), table + > PCIE_ATR_TRSL_ADDR_MSB_OFFSET); > > - writel_relaxed(lower_32_bits(cpu_addr) | > PCIE_ATR_SIZE(fls(size) - 1), > - table); > - writel_relaxed(upper_32_bits(cpu_addr), > - table + PCIE_ATR_SRC_ADDR_MSB_OFFSET); > - writel_relaxed(lower_32_bits(pci_addr), > - table + PCIE_ATR_TRSL_ADDR_LSB_OFFSET); > - writel_relaxed(upper_32_bits(pci_addr), > - table + PCIE_ATR_TRSL_ADDR_MSB_OFFSET); > + if (type == IORESOURCE_IO) { > + val = PCIE_ATR_TYPE_IO | PCIE_ATR_TLP_TYPE_IO; > + range_type = "IO"; > + } else { > + val = PCIE_ATR_TYPE_MEM | > PCIE_ATR_TLP_TYPE_MEM; > + range_type = "MEM"; > + } > > - if (type == IORESOURCE_IO) > - val = PCIE_ATR_TYPE_IO | PCIE_ATR_TLP_TYPE_IO; > - else > - val = PCIE_ATR_TYPE_MEM | PCIE_ATR_TLP_TYPE_MEM; > + writel_relaxed(val, table + > PCIE_ATR_TRSL_PARAM_OFFSET); > > - writel_relaxed(val, table + PCIE_ATR_TRSL_PARAM_OFFSET); > + dev_dbg(pcie->dev, "set %s trans window[%d]: cpu_addr = > %#llx, pci_addr = %#llx, size = %#llx\n", > + range_type, *num, (unsigned long long)cpu_addr, > + (unsigned long long)pci_addr, (unsigned long > long)table_size); > + > + cpu_addr += table_size; > + pci_addr += table_size; > + remaining -= table_size; > + (*num)++; > + } > + > + if (remaining) > + dev_warn(pcie->dev, "not enough translate table for > addr: %#llx, limited to [%d]\n", > + (unsigned long long)cpu_addr, > PCIE_MAX_TRANS_TABLES); > > return 0; > } > @@ -380,30 +405,20 @@ static int mtk_pcie_startup_port(struct > mtk_gen3_pcie *pcie) > resource_size_t cpu_addr; > resource_size_t pci_addr; > resource_size_t size; > - const char *range_type; > > - if (type == IORESOURCE_IO) { > + if (type == IORESOURCE_IO) > cpu_addr = pci_pio_to_address(res->start); > - range_type = "IO"; > - } else if (type == IORESOURCE_MEM) { > + else if (type == IORESOURCE_MEM) > cpu_addr = res->start; > - range_type = "MEM"; > - } else { > + else > continue; > - } > > pci_addr = res->start - entry->offset; > size = resource_size(res); > err = mtk_pcie_set_trans_table(pcie, cpu_addr, > pci_addr, size, > - type, table_index); > + type, &table_index); > if (err) > return err; > - > - dev_dbg(pcie->dev, "set %s trans window[%d]: cpu_addr = > %#llx, pci_addr = %#llx, size = %#llx\n", > - range_type, table_index, (unsigned long > long)cpu_addr, > - (unsigned long long)pci_addr, (unsigned long > long)size); > - > - table_index++; > } > > return 0;
Hi Bjorn, Lorenzo, Sorry to bother you, but would you mind taking a look at this patch? Appreciate any suggestions. Thanks. On Thu, 2023-11-23 at 01:27 +0000, Jianjun Wang (王建军) wrote: > Hi Maintainers, > > Gentle ping for this patch, if there is anything I need to do, please > let me know. > > Thanks. > > On Mon, 2023-10-23 at 16:14 +0800, Jianjun Wang wrote: > > The size of translation table should be a power of 2, using fls() > > cannot get the proper value when the size is not a power of 2. For > > example, fls(0x3e00000) - 1 = 25, hence the PCIe translation window > > size will be set to 0x2000000 instead of the expected size > > 0x3e00000. > > > > Fix translation window by splitting the MMIO space to multiple > > tables > > if > > its size is not a power of 2. > > > > Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver > > for MT8192") > > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> > > > > --- > > Changes in v2: > > Only print warning message when reach the maximum translation table > > number, the MEM space still works but will be smaller than > > expected. > > > > Bootup logs on MT8195 Platform: > > > > > Before this patch: > > > > mtk-pcie-gen3 112f0000.pcie: Parsing ranges property... > > mtk-pcie-gen3 112f0000.pcie: IO 0x0020000000..0x00201fffff -> > > 0x0020000000 > > mtk-pcie-gen3 112f0000.pcie: MEM 0x0020200000..0x0023ffffff -> > > 0x0020200000 > > mtk-pcie-gen3 112f0000.pcie: set IO trans window[0]: cpu_addr = > > 0x20000000, pci_addr = 0x20000000, size = 0x200000 > > mtk-pcie-gen3 112f0000.pcie: set MEM trans window[1]: cpu_addr = > > 0x20200000, pci_addr = 0x20200000, size = 0x3e00000 > > > > > We expect the MEM trans window size to be 0x3e00000, but its > > > actual > > > available size is 0x2000000. > > > After applying this patch: > > > > mtk-pcie-gen3 112f0000.pcie: Parsing ranges property... > > mtk-pcie-gen3 112f0000.pcie: IO 0x0020000000..0x00201fffff -> > > 0x0020000000 > > mtk-pcie-gen3 112f0000.pcie: MEM 0x0020200000..0x0023ffffff -> > > 0x0020200000 > > mtk-pcie-gen3 112f0000.pcie: set IO trans window[0]: cpu_addr = > > 0x20000000, pci_addr = 0x20000000, size = 0x200000 > > mtk-pcie-gen3 112f0000.pcie: set MEM trans window[1]: cpu_addr = > > 0x20200000, pci_addr = 0x20200000, size = 0x200000 > > mtk-pcie-gen3 112f0000.pcie: set MEM trans window[2]: cpu_addr = > > 0x20400000, pci_addr = 0x20400000, size = 0x400000 > > mtk-pcie-gen3 112f0000.pcie: set MEM trans window[3]: cpu_addr = > > 0x20800000, pci_addr = 0x20800000, size = 0x800000 > > mtk-pcie-gen3 112f0000.pcie: set MEM trans window[4]: cpu_addr = > > 0x21000000, pci_addr = 0x21000000, size = 0x1000000 > > mtk-pcie-gen3 112f0000.pcie: set MEM trans window[5]: cpu_addr = > > 0x22000000, pci_addr = 0x22000000, size = 0x2000000 > > > > > Total available size for MEM trans window is 0x3e00000. > > > > --- > > --- > > drivers/pci/controller/pcie-mediatek-gen3.c | 85 ++++++++++++----- > > -- > > -- > > 1 file changed, 50 insertions(+), 35 deletions(-) > > > > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c > > b/drivers/pci/controller/pcie-mediatek-gen3.c > > index e0e27645fdf4..975b3024fb08 100644 > > --- a/drivers/pci/controller/pcie-mediatek-gen3.c > > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c > > @@ -245,35 +245,60 @@ static int mtk_pcie_set_trans_table(struct > > mtk_gen3_pcie *pcie, > > resource_size_t cpu_addr, > > resource_size_t pci_addr, > > resource_size_t size, > > - unsigned long type, int num) > > + unsigned long type, int *num) > > { > > + resource_size_t remaining = size; > > + resource_size_t table_size; > > + resource_size_t addr_align; > > + const char *range_type; > > void __iomem *table; > > u32 val; > > > > - if (num >= PCIE_MAX_TRANS_TABLES) { > > - dev_err(pcie->dev, "not enough translate table for > > addr: %#llx, limited to [%d]\n", > > - (unsigned long long)cpu_addr, > > PCIE_MAX_TRANS_TABLES); > > - return -ENODEV; > > - } > > + while (remaining && (*num < PCIE_MAX_TRANS_TABLES)) { > > + /* Table size needs to be a power of 2 */ > > + table_size = BIT(fls(remaining) - 1); > > + > > + if (cpu_addr > 0) { > > + addr_align = BIT(ffs(cpu_addr) - 1); > > + table_size = min(table_size, addr_align); > > + } > > + > > + /* Minimum size of translate table is 4KiB */ > > + if (table_size < 0x1000) { > > + dev_err(pcie->dev, "illegal table size > > %#llx\n", > > + (unsigned long long)table_size); > > + return -EINVAL; > > + } > > > > - table = pcie->base + PCIE_TRANS_TABLE_BASE_REG + > > - num * PCIE_ATR_TLB_SET_OFFSET; > > + table = pcie->base + PCIE_TRANS_TABLE_BASE_REG + *num * > > PCIE_ATR_TLB_SET_OFFSET; > > + writel_relaxed(lower_32_bits(cpu_addr) | > > PCIE_ATR_SIZE(fls(table_size) - 1), table); > > + writel_relaxed(upper_32_bits(cpu_addr), table + > > PCIE_ATR_SRC_ADDR_MSB_OFFSET); > > + writel_relaxed(lower_32_bits(pci_addr), table + > > PCIE_ATR_TRSL_ADDR_LSB_OFFSET); > > + writel_relaxed(upper_32_bits(pci_addr), table + > > PCIE_ATR_TRSL_ADDR_MSB_OFFSET); > > > > - writel_relaxed(lower_32_bits(cpu_addr) | > > PCIE_ATR_SIZE(fls(size) - 1), > > - table); > > - writel_relaxed(upper_32_bits(cpu_addr), > > - table + PCIE_ATR_SRC_ADDR_MSB_OFFSET); > > - writel_relaxed(lower_32_bits(pci_addr), > > - table + PCIE_ATR_TRSL_ADDR_LSB_OFFSET); > > - writel_relaxed(upper_32_bits(pci_addr), > > - table + PCIE_ATR_TRSL_ADDR_MSB_OFFSET); > > + if (type == IORESOURCE_IO) { > > + val = PCIE_ATR_TYPE_IO | PCIE_ATR_TLP_TYPE_IO; > > + range_type = "IO"; > > + } else { > > + val = PCIE_ATR_TYPE_MEM | > > PCIE_ATR_TLP_TYPE_MEM; > > + range_type = "MEM"; > > + } > > > > - if (type == IORESOURCE_IO) > > - val = PCIE_ATR_TYPE_IO | PCIE_ATR_TLP_TYPE_IO; > > - else > > - val = PCIE_ATR_TYPE_MEM | PCIE_ATR_TLP_TYPE_MEM; > > + writel_relaxed(val, table + > > PCIE_ATR_TRSL_PARAM_OFFSET); > > > > - writel_relaxed(val, table + PCIE_ATR_TRSL_PARAM_OFFSET); > > + dev_dbg(pcie->dev, "set %s trans window[%d]: cpu_addr = > > %#llx, pci_addr = %#llx, size = %#llx\n", > > + range_type, *num, (unsigned long long)cpu_addr, > > + (unsigned long long)pci_addr, (unsigned long > > long)table_size); > > + > > + cpu_addr += table_size; > > + pci_addr += table_size; > > + remaining -= table_size; > > + (*num)++; > > + } > > + > > + if (remaining) > > + dev_warn(pcie->dev, "not enough translate table for > > addr: %#llx, limited to [%d]\n", > > + (unsigned long long)cpu_addr, > > PCIE_MAX_TRANS_TABLES); > > > > return 0; > > } > > @@ -380,30 +405,20 @@ static int mtk_pcie_startup_port(struct > > mtk_gen3_pcie *pcie) > > resource_size_t cpu_addr; > > resource_size_t pci_addr; > > resource_size_t size; > > - const char *range_type; > > > > - if (type == IORESOURCE_IO) { > > + if (type == IORESOURCE_IO) > > cpu_addr = pci_pio_to_address(res->start); > > - range_type = "IO"; > > - } else if (type == IORESOURCE_MEM) { > > + else if (type == IORESOURCE_MEM) > > cpu_addr = res->start; > > - range_type = "MEM"; > > - } else { > > + else > > continue; > > - } > > > > pci_addr = res->start - entry->offset; > > size = resource_size(res); > > err = mtk_pcie_set_trans_table(pcie, cpu_addr, > > pci_addr, size, > > - type, table_index); > > + type, &table_index); > > if (err) > > return err; > > - > > - dev_dbg(pcie->dev, "set %s trans window[%d]: cpu_addr = > > %#llx, pci_addr = %#llx, size = %#llx\n", > > - range_type, table_index, (unsigned long > > long)cpu_addr, > > - (unsigned long long)pci_addr, (unsigned long > > long)size); > > - > > - table_index++; > > } > > > > return 0;
Hello, > The size of translation table should be a power of 2, using fls() > cannot get the proper value when the size is not a power of 2. For > example, fls(0x3e00000) - 1 = 25, hence the PCIe translation window > size will be set to 0x2000000 instead of the expected size 0x3e00000. > > Fix translation window by splitting the MMIO space to multiple tables if > its size is not a power of 2. Applied to controller/mediatek, thank you! [1/1] PCI: mediatek-gen3: Fix translation window size calculation https://git.kernel.org/pci/pci/c/8b7b89ef507c Krzysztof
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c index e0e27645fdf4..975b3024fb08 100644 --- a/drivers/pci/controller/pcie-mediatek-gen3.c +++ b/drivers/pci/controller/pcie-mediatek-gen3.c @@ -245,35 +245,60 @@ static int mtk_pcie_set_trans_table(struct mtk_gen3_pcie *pcie, resource_size_t cpu_addr, resource_size_t pci_addr, resource_size_t size, - unsigned long type, int num) + unsigned long type, int *num) { + resource_size_t remaining = size; + resource_size_t table_size; + resource_size_t addr_align; + const char *range_type; void __iomem *table; u32 val; - if (num >= PCIE_MAX_TRANS_TABLES) { - dev_err(pcie->dev, "not enough translate table for addr: %#llx, limited to [%d]\n", - (unsigned long long)cpu_addr, PCIE_MAX_TRANS_TABLES); - return -ENODEV; - } + while (remaining && (*num < PCIE_MAX_TRANS_TABLES)) { + /* Table size needs to be a power of 2 */ + table_size = BIT(fls(remaining) - 1); + + if (cpu_addr > 0) { + addr_align = BIT(ffs(cpu_addr) - 1); + table_size = min(table_size, addr_align); + } + + /* Minimum size of translate table is 4KiB */ + if (table_size < 0x1000) { + dev_err(pcie->dev, "illegal table size %#llx\n", + (unsigned long long)table_size); + return -EINVAL; + } - table = pcie->base + PCIE_TRANS_TABLE_BASE_REG + - num * PCIE_ATR_TLB_SET_OFFSET; + table = pcie->base + PCIE_TRANS_TABLE_BASE_REG + *num * PCIE_ATR_TLB_SET_OFFSET; + writel_relaxed(lower_32_bits(cpu_addr) | PCIE_ATR_SIZE(fls(table_size) - 1), table); + writel_relaxed(upper_32_bits(cpu_addr), table + PCIE_ATR_SRC_ADDR_MSB_OFFSET); + writel_relaxed(lower_32_bits(pci_addr), table + PCIE_ATR_TRSL_ADDR_LSB_OFFSET); + writel_relaxed(upper_32_bits(pci_addr), table + PCIE_ATR_TRSL_ADDR_MSB_OFFSET); - writel_relaxed(lower_32_bits(cpu_addr) | PCIE_ATR_SIZE(fls(size) - 1), - table); - writel_relaxed(upper_32_bits(cpu_addr), - table + PCIE_ATR_SRC_ADDR_MSB_OFFSET); - writel_relaxed(lower_32_bits(pci_addr), - table + PCIE_ATR_TRSL_ADDR_LSB_OFFSET); - writel_relaxed(upper_32_bits(pci_addr), - table + PCIE_ATR_TRSL_ADDR_MSB_OFFSET); + if (type == IORESOURCE_IO) { + val = PCIE_ATR_TYPE_IO | PCIE_ATR_TLP_TYPE_IO; + range_type = "IO"; + } else { + val = PCIE_ATR_TYPE_MEM | PCIE_ATR_TLP_TYPE_MEM; + range_type = "MEM"; + } - if (type == IORESOURCE_IO) - val = PCIE_ATR_TYPE_IO | PCIE_ATR_TLP_TYPE_IO; - else - val = PCIE_ATR_TYPE_MEM | PCIE_ATR_TLP_TYPE_MEM; + writel_relaxed(val, table + PCIE_ATR_TRSL_PARAM_OFFSET); - writel_relaxed(val, table + PCIE_ATR_TRSL_PARAM_OFFSET); + dev_dbg(pcie->dev, "set %s trans window[%d]: cpu_addr = %#llx, pci_addr = %#llx, size = %#llx\n", + range_type, *num, (unsigned long long)cpu_addr, + (unsigned long long)pci_addr, (unsigned long long)table_size); + + cpu_addr += table_size; + pci_addr += table_size; + remaining -= table_size; + (*num)++; + } + + if (remaining) + dev_warn(pcie->dev, "not enough translate table for addr: %#llx, limited to [%d]\n", + (unsigned long long)cpu_addr, PCIE_MAX_TRANS_TABLES); return 0; } @@ -380,30 +405,20 @@ static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie) resource_size_t cpu_addr; resource_size_t pci_addr; resource_size_t size; - const char *range_type; - if (type == IORESOURCE_IO) { + if (type == IORESOURCE_IO) cpu_addr = pci_pio_to_address(res->start); - range_type = "IO"; - } else if (type == IORESOURCE_MEM) { + else if (type == IORESOURCE_MEM) cpu_addr = res->start; - range_type = "MEM"; - } else { + else continue; - } pci_addr = res->start - entry->offset; size = resource_size(res); err = mtk_pcie_set_trans_table(pcie, cpu_addr, pci_addr, size, - type, table_index); + type, &table_index); if (err) return err; - - dev_dbg(pcie->dev, "set %s trans window[%d]: cpu_addr = %#llx, pci_addr = %#llx, size = %#llx\n", - range_type, table_index, (unsigned long long)cpu_addr, - (unsigned long long)pci_addr, (unsigned long long)size); - - table_index++; } return 0;
The size of translation table should be a power of 2, using fls() cannot get the proper value when the size is not a power of 2. For example, fls(0x3e00000) - 1 = 25, hence the PCIe translation window size will be set to 0x2000000 instead of the expected size 0x3e00000. Fix translation window by splitting the MMIO space to multiple tables if its size is not a power of 2. Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192") Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> --- Changes in v2: Only print warning message when reach the maximum translation table number, the MEM space still works but will be smaller than expected. Bootup logs on MT8195 Platform: > Before this patch: mtk-pcie-gen3 112f0000.pcie: Parsing ranges property... mtk-pcie-gen3 112f0000.pcie: IO 0x0020000000..0x00201fffff -> 0x0020000000 mtk-pcie-gen3 112f0000.pcie: MEM 0x0020200000..0x0023ffffff -> 0x0020200000 mtk-pcie-gen3 112f0000.pcie: set IO trans window[0]: cpu_addr = 0x20000000, pci_addr = 0x20000000, size = 0x200000 mtk-pcie-gen3 112f0000.pcie: set MEM trans window[1]: cpu_addr = 0x20200000, pci_addr = 0x20200000, size = 0x3e00000 > We expect the MEM trans window size to be 0x3e00000, but its actual available size is 0x2000000. > After applying this patch: mtk-pcie-gen3 112f0000.pcie: Parsing ranges property... mtk-pcie-gen3 112f0000.pcie: IO 0x0020000000..0x00201fffff -> 0x0020000000 mtk-pcie-gen3 112f0000.pcie: MEM 0x0020200000..0x0023ffffff -> 0x0020200000 mtk-pcie-gen3 112f0000.pcie: set IO trans window[0]: cpu_addr = 0x20000000, pci_addr = 0x20000000, size = 0x200000 mtk-pcie-gen3 112f0000.pcie: set MEM trans window[1]: cpu_addr = 0x20200000, pci_addr = 0x20200000, size = 0x200000 mtk-pcie-gen3 112f0000.pcie: set MEM trans window[2]: cpu_addr = 0x20400000, pci_addr = 0x20400000, size = 0x400000 mtk-pcie-gen3 112f0000.pcie: set MEM trans window[3]: cpu_addr = 0x20800000, pci_addr = 0x20800000, size = 0x800000 mtk-pcie-gen3 112f0000.pcie: set MEM trans window[4]: cpu_addr = 0x21000000, pci_addr = 0x21000000, size = 0x1000000 mtk-pcie-gen3 112f0000.pcie: set MEM trans window[5]: cpu_addr = 0x22000000, pci_addr = 0x22000000, size = 0x2000000 > Total available size for MEM trans window is 0x3e00000. --- --- drivers/pci/controller/pcie-mediatek-gen3.c | 85 ++++++++++++--------- 1 file changed, 50 insertions(+), 35 deletions(-)