diff mbox series

[v3,1/2] dt-bindings: mmc: mtk-sd: add tuning steps related property

Message ID 20231130061513.1296-2-axe.yang@mediatek.com (mailing list archive)
State New, archived
Headers show
Series mmc: mediatek: add support for 64-steps tuning | expand

Commit Message

Axe Yang (杨磊) Nov. 30, 2023, 6:15 a.m. UTC 
Add 'mediatek,tuning-steps' setting. This property will give MSDC
a chance to extend tuning steps up to 64. With more tuning steps,
MSDC may achieve a more optimal calibration result, thus avoiding
potential CRC issues.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Axe Yang <axe.yang@mediatek.com>
---
 Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
index 3fffa467e4e1..c532ec92d2d9 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -145,6 +145,15 @@  properties:
     minimum: 0
     maximum: 7
 
+  mediatek,tuning-step:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Some SoCs need extend tuning step for better delay value to avoid CRC issue.
+      If not present, default tuning step is 32. For eMMC and SD, this can yield
+      satisfactory calibration results in most cases.
+    enum: [32, 64]
+    default: 32
+
   resets:
     maxItems: 1