| Message ID | 20231213150435.4134390-8-wenst@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Matthias Brugger |
| Headers | show |
| Series | arm64: dts: mediatek: Add MT8186 Corsola Chromebooks | expand |
Il 13/12/23 16:04, Chen-Yu Tsai ha scritto: > The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4, > is a convertible device based on a common design of the same name. The > device comes in different variants. Of them, whether a world facing > camera is integrated is the only differentiating factor between the > two device trees added. The different SKU IDs describe this alone. > > The other device difference is the touchpad component used. This is > simply handled by having both possible components described in the > device tree, and letting the implementation figure out which one is > actually available. The system bootloader / firmware does not > differentiate this in that they share the same SKU IDs. > > Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> > Acked-by: Conor Dooley <conor.dooley@microchip.com> > --- > Changes since v2: > - Picked up Conor's ack > > Changes since v1: > - Removed trackpad_pins reference (moved to i2c2 in corsola dtsi) > - Fixed copyright year > - Renamed touchpad to trackpad > --- > arch/arm64/boot/dts/mediatek/Makefile | 2 + > .../mt8186-corsola-steelix-sku131072.dts | 18 ++ > .../mt8186-corsola-steelix-sku131073.dts | 18 ++ > .../dts/mediatek/mt8186-corsola-steelix.dtsi | 195 ++++++++++++++++++ > 4 files changed, 233 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 442af61b1305..7bd9471b89f9 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -43,6 +43,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts > new file mode 100644 > index 000000000000..eae17bca8585 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts > @@ -0,0 +1,18 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +/* > + * Copyright 2022 Google LLC > + */ > + > +/dts-v1/; > +#include "mt8186-corsola-steelix.dtsi" > + > +/ { > + model = "Google Steelix board"; > + compatible = "google,steelix-sku131072", "google,steelix", > + "mediatek,mt8186"; > + chassis-type = "convertible"; > +}; > + > +&mt6366codec { > + mediatek,dmic-mode = <0>; /* two-wire */ > +}; > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts > new file mode 100644 > index 000000000000..a55375b95d0d > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts > @@ -0,0 +1,18 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +/* > + * Copyright 2022 Google LLC > + */ > + > +/dts-v1/; > +#include "mt8186-corsola-steelix.dtsi" > + > +/ { > + model = "Google Steelix board"; > + compatible = "google,steelix-sku131073", "google,steelix", > + "mediatek,mt8186"; > + chassis-type = "convertible"; > +}; > + > +&mt6366codec { > + mediatek,dmic-mode = <1>; /* one-wire */ > +}; > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi > new file mode 100644 > index 000000000000..47262bc499ad > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi > @@ -0,0 +1,195 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +/* > + * Copyright 2022 Google LLC > + */ > + > +/dts-v1/; > +#include "mt8186-corsola.dtsi" > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > + > +/{ > + pp1000_edpbrdg: regulator-pp1000-edpbrdg { > + compatible = "regulator-fixed"; > + regulator-name = "pp1000_edpbrdg"; > + pinctrl-names = "default"; > + pinctrl-0 = <&en_pp1000_edpbrdg>; > + enable-active-high; > + regulator-boot-on; > + gpio = <&pio 29 GPIO_ACTIVE_HIGH>; > + vin-supply = <&pp3300_z2>; > + }; > + > + pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx { > + compatible = "regulator-fixed"; > + regulator-name = "pp1800_edpbrdg_dx"; > + pinctrl-names = "default"; > + pinctrl-0 = <&en_pp1800_edpbrdg>; > + enable-active-high; > + regulator-boot-on; > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > + vin-supply = <&mt6366_vio18_reg>; > + }; > + > + pp3300_edp_dx: regulator-pp3300-edp-dx { > + compatible = "regulator-fixed"; > + regulator-name = "pp3300_edp_dx"; > + pinctrl-names = "default"; > + pinctrl-0 = <&en_pp3300_edpbrdg>; > + enable-active-high; > + regulator-boot-on; > + gpio = <&pio 31 GPIO_ACTIVE_HIGH>; > + vin-supply = <&pp3300_z2>; > + }; > +}; > + > +&dsi_out { > + remote-endpoint = <&anx7625_in>; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + > + anx_bridge: anx7625@58 { > + compatible = "analogix,anx7625"; > + reg = <0x58>; > + pinctrl-names = "default"; > + pinctrl-0 = <&anx7625_pins>; > + enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; > + vdd10-supply = <&pp1000_edpbrdg>; > + vdd18-supply = <&pp1800_edpbrdg_dx>; > + vdd33-supply = <&pp3300_edp_dx>; > + analogix,lane0-swing = /bits/ 8 <0x70 0x30>; > + analogix,lane1-swing = /bits/ 8 <0x70 0x30>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + anx7625_in: endpoint { > + remote-endpoint = <&dsi_out>; > + data-lanes = <0 1 2 3>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + anx7625_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + }; > + > + aux-bus { > + panel: panel { > + compatible = "edp-panel"; > + power-supply = <&pp3300_disp_x>; > + backlight = <&backlight_lcd0>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&anx7625_out>; > + }; > + }; > + }; > + }; > + }; > +}; > + > +&i2c1 { > + touchscreen: touchscreen@5d { > + compatible = "goodix,gt7375p"; > + reg = <0x5d>; > + interrupts-extended = <&pio 12 IRQ_TYPE_EDGE_FALLING>; > + pinctrl-names = "default"; > + pinctrl-0 = <&touchscreen_pins>; > + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; > + vdd-supply = <&pp3300_s3>; > + goodix,no-reset-during-suspend; > + }; > +}; > + > +&i2c2 { > + i2c-scl-internal-delay-ns = <22000>; > + > + /* second source component */ > + trackpad@2c { > + compatible = "hid-over-i2c"; > + reg = <0x2c>; > + hid-descr-addr = <0x20>; > + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; > + vdd-supply = <&pp3300_s3>; > + wakeup-source; > + }; > +}; > + > +&keyboard_controller { > + function-row-physmap = < > + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ > + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ > + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ > + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ > + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ > + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ > + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ > + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ > + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ > + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ > + >; > + > + linux,keymap = < > + MATRIX_KEY(0x00, 0x02, KEY_BACK) > + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) > + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) > + MATRIX_KEY(0x01, 0x02, KEY_SCALE) > + MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN) > + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP) > + MATRIX_KEY(0x01, 0x04, KEY_MICMUTE) > + MATRIX_KEY(0x02, 0x09, KEY_MUTE) > + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) > + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) > + CROS_STD_MAIN_KEYMAP > + >; > +}; > + > +&pio { > + anx7625_pins: anx7625-pins { > + pins1 { pins-en-rst > + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>, > + <PINMUX_GPIO98__FUNC_GPIO98>; > + output-low; > + }; > + > + pins2 { pins-is-this-an-interrupt? :-) > + pinmux = <PINMUX_GPIO9__FUNC_GPIO9>; > + input-enable; > + bias-disable; > + }; > + }; > + > + en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins { > + pins { pins-vreg-en like in corsola.dtsi > + pinmux = <PINMUX_GPIO29__FUNC_GPIO29>; > + output-low; > + }; > + }; > + > + en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins { > + pins { same > + pinmux = <PINMUX_GPIO30__FUNC_GPIO30>; > + output-low; > + }; > + }; > + > + en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins { > + pins { ditto Cheers, Angelo
On Thu, Dec 14, 2023 at 7:34 PM AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> wrote: > > Il 13/12/23 16:04, Chen-Yu Tsai ha scritto: > > The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4, > > is a convertible device based on a common design of the same name. The > > device comes in different variants. Of them, whether a world facing > > camera is integrated is the only differentiating factor between the > > two device trees added. The different SKU IDs describe this alone. > > > > The other device difference is the touchpad component used. This is > > simply handled by having both possible components described in the > > device tree, and letting the implementation figure out which one is > > actually available. The system bootloader / firmware does not > > differentiate this in that they share the same SKU IDs. > > > > Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> > > Acked-by: Conor Dooley <conor.dooley@microchip.com> > > --- > > Changes since v2: > > - Picked up Conor's ack > > > > Changes since v1: > > - Removed trackpad_pins reference (moved to i2c2 in corsola dtsi) > > - Fixed copyright year > > - Renamed touchpad to trackpad > > --- > > arch/arm64/boot/dts/mediatek/Makefile | 2 + > > .../mt8186-corsola-steelix-sku131072.dts | 18 ++ > > .../mt8186-corsola-steelix-sku131073.dts | 18 ++ > > .../dts/mediatek/mt8186-corsola-steelix.dtsi | 195 ++++++++++++++++++ > > 4 files changed, 233 insertions(+) > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi > > > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > > index 442af61b1305..7bd9471b89f9 100644 > > --- a/arch/arm64/boot/dts/mediatek/Makefile > > +++ b/arch/arm64/boot/dts/mediatek/Makefile > > @@ -43,6 +43,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts > > new file mode 100644 > > index 000000000000..eae17bca8585 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts > > @@ -0,0 +1,18 @@ > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > > +/* > > + * Copyright 2022 Google LLC > > + */ > > + > > +/dts-v1/; > > +#include "mt8186-corsola-steelix.dtsi" > > + > > +/ { > > + model = "Google Steelix board"; > > + compatible = "google,steelix-sku131072", "google,steelix", > > + "mediatek,mt8186"; > > + chassis-type = "convertible"; > > +}; > > + > > +&mt6366codec { > > + mediatek,dmic-mode = <0>; /* two-wire */ > > +}; > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts > > new file mode 100644 > > index 000000000000..a55375b95d0d > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts > > @@ -0,0 +1,18 @@ > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > > +/* > > + * Copyright 2022 Google LLC > > + */ > > + > > +/dts-v1/; > > +#include "mt8186-corsola-steelix.dtsi" > > + > > +/ { > > + model = "Google Steelix board"; > > + compatible = "google,steelix-sku131073", "google,steelix", > > + "mediatek,mt8186"; > > + chassis-type = "convertible"; > > +}; > > + > > +&mt6366codec { > > + mediatek,dmic-mode = <1>; /* one-wire */ > > +}; > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi > > new file mode 100644 > > index 000000000000..47262bc499ad > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi > > @@ -0,0 +1,195 @@ > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > > +/* > > + * Copyright 2022 Google LLC > > + */ > > + > > +/dts-v1/; > > +#include "mt8186-corsola.dtsi" > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/input/input.h> > > + > > +/{ > > + pp1000_edpbrdg: regulator-pp1000-edpbrdg { > > + compatible = "regulator-fixed"; > > + regulator-name = "pp1000_edpbrdg"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&en_pp1000_edpbrdg>; > > + enable-active-high; > > + regulator-boot-on; > > + gpio = <&pio 29 GPIO_ACTIVE_HIGH>; > > + vin-supply = <&pp3300_z2>; > > + }; > > + > > + pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx { > > + compatible = "regulator-fixed"; > > + regulator-name = "pp1800_edpbrdg_dx"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&en_pp1800_edpbrdg>; > > + enable-active-high; > > + regulator-boot-on; > > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > > + vin-supply = <&mt6366_vio18_reg>; > > + }; > > + > > + pp3300_edp_dx: regulator-pp3300-edp-dx { > > + compatible = "regulator-fixed"; > > + regulator-name = "pp3300_edp_dx"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&en_pp3300_edpbrdg>; > > + enable-active-high; > > + regulator-boot-on; > > + gpio = <&pio 31 GPIO_ACTIVE_HIGH>; > > + vin-supply = <&pp3300_z2>; > > + }; > > +}; > > + > > +&dsi_out { > > + remote-endpoint = <&anx7625_in>; > > +}; > > + > > +&i2c0 { > > + clock-frequency = <400000>; > > + > > + anx_bridge: anx7625@58 { > > + compatible = "analogix,anx7625"; > > + reg = <0x58>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&anx7625_pins>; > > + enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>; > > + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; BTW, do you think there is anything we can do about this backwards active level setting? > > + vdd10-supply = <&pp1000_edpbrdg>; > > + vdd18-supply = <&pp1800_edpbrdg_dx>; > > + vdd33-supply = <&pp3300_edp_dx>; > > + analogix,lane0-swing = /bits/ 8 <0x70 0x30>; > > + analogix,lane1-swing = /bits/ 8 <0x70 0x30>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + > > + anx7625_in: endpoint { > > + remote-endpoint = <&dsi_out>; > > + data-lanes = <0 1 2 3>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + anx7625_out: endpoint { > > + remote-endpoint = <&panel_in>; > > + }; > > + }; > > + }; > > + > > + aux-bus { > > + panel: panel { > > + compatible = "edp-panel"; > > + power-supply = <&pp3300_disp_x>; > > + backlight = <&backlight_lcd0>; > > + > > + port { > > + panel_in: endpoint { > > + remote-endpoint = <&anx7625_out>; > > + }; > > + }; > > + }; > > + }; > > + }; > > +}; > > + > > +&i2c1 { > > + touchscreen: touchscreen@5d { > > + compatible = "goodix,gt7375p"; > > + reg = <0x5d>; > > + interrupts-extended = <&pio 12 IRQ_TYPE_EDGE_FALLING>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&touchscreen_pins>; > > + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; > > + vdd-supply = <&pp3300_s3>; > > + goodix,no-reset-during-suspend; > > + }; > > +}; > > + > > +&i2c2 { > > + i2c-scl-internal-delay-ns = <22000>; > > + > > + /* second source component */ > > + trackpad@2c { > > + compatible = "hid-over-i2c"; > > + reg = <0x2c>; > > + hid-descr-addr = <0x20>; > > + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; > > + vdd-supply = <&pp3300_s3>; > > + wakeup-source; > > + }; > > +}; > > + > > +&keyboard_controller { > > + function-row-physmap = < > > + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ > > + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ > > + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ > > + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ > > + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ > > + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ > > + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ > > + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ > > + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ > > + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ > > + >; > > + > > + linux,keymap = < > > + MATRIX_KEY(0x00, 0x02, KEY_BACK) > > + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) > > + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) > > + MATRIX_KEY(0x01, 0x02, KEY_SCALE) > > + MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN) > > + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP) > > + MATRIX_KEY(0x01, 0x04, KEY_MICMUTE) > > + MATRIX_KEY(0x02, 0x09, KEY_MUTE) > > + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) > > + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) > > + CROS_STD_MAIN_KEYMAP > > + >; > > +}; > > + > > +&pio { > > + anx7625_pins: anx7625-pins { > > + pins1 { > > pins-en-rst Ack. Also I think we can split them so they each get proper names. > > + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>, > > + <PINMUX_GPIO98__FUNC_GPIO98>; > > + output-low; > > + }; > > + > > + pins2 { > > pins-is-this-an-interrupt? :-) Yes. Will use pins-int. > > + pinmux = <PINMUX_GPIO9__FUNC_GPIO9>; > > + input-enable; > > + bias-disable; > > + }; > > + }; > > + > > + en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins { > > + pins { > > pins-vreg-en like in corsola.dtsi Ack. > > + pinmux = <PINMUX_GPIO29__FUNC_GPIO29>; > > + output-low; > > + }; > > + }; > > + > > + en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins { > > + pins { > > same Ack. > > + pinmux = <PINMUX_GPIO30__FUNC_GPIO30>; > > + output-low; > > + }; > > + }; > > + > > + en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins { > > + pins { Ack. ChenYu
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 442af61b1305..7bd9471b89f9 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -43,6 +43,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts new file mode 100644 index 000000000000..eae17bca8585 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-steelix.dtsi" + +/ { + model = "Google Steelix board"; + compatible = "google,steelix-sku131072", "google,steelix", + "mediatek,mt8186"; + chassis-type = "convertible"; +}; + +&mt6366codec { + mediatek,dmic-mode = <0>; /* two-wire */ +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts new file mode 100644 index 000000000000..a55375b95d0d --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-steelix.dtsi" + +/ { + model = "Google Steelix board"; + compatible = "google,steelix-sku131073", "google,steelix", + "mediatek,mt8186"; + chassis-type = "convertible"; +}; + +&mt6366codec { + mediatek,dmic-mode = <1>; /* one-wire */ +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi new file mode 100644 index 000000000000..47262bc499ad --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/{ + pp1000_edpbrdg: regulator-pp1000-edpbrdg { + compatible = "regulator-fixed"; + regulator-name = "pp1000_edpbrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp1000_edpbrdg>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 29 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300_z2>; + }; + + pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx { + compatible = "regulator-fixed"; + regulator-name = "pp1800_edpbrdg_dx"; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp1800_edpbrdg>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; + vin-supply = <&mt6366_vio18_reg>; + }; + + pp3300_edp_dx: regulator-pp3300-edp-dx { + compatible = "regulator-fixed"; + regulator-name = "pp3300_edp_dx"; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_edpbrdg>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 31 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300_z2>; + }; +}; + +&dsi_out { + remote-endpoint = <&anx7625_in>; +}; + +&i2c0 { + clock-frequency = <400000>; + + anx_bridge: anx7625@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&anx7625_pins>; + enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1000_edpbrdg>; + vdd18-supply = <&pp1800_edpbrdg_dx>; + vdd33-supply = <&pp3300_edp_dx>; + analogix,lane0-swing = /bits/ 8 <0x70 0x30>; + analogix,lane1-swing = /bits/ 8 <0x70 0x30>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + anx7625_in: endpoint { + remote-endpoint = <&dsi_out>; + data-lanes = <0 1 2 3>; + }; + }; + + port@1 { + reg = <1>; + + anx7625_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "edp-panel"; + power-supply = <&pp3300_disp_x>; + backlight = <&backlight_lcd0>; + + port { + panel_in: endpoint { + remote-endpoint = <&anx7625_out>; + }; + }; + }; + }; + }; +}; + +&i2c1 { + touchscreen: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; + interrupts-extended = <&pio 12 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; + vdd-supply = <&pp3300_s3>; + goodix,no-reset-during-suspend; + }; +}; + +&i2c2 { + i2c-scl-internal-delay-ns = <22000>; + + /* second source component */ + trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&pp3300_s3>; + wakeup-source; + }; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x01, 0x04, KEY_MICMUTE) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + CROS_STD_MAIN_KEYMAP + >; +}; + +&pio { + anx7625_pins: anx7625-pins { + pins1 { + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>, + <PINMUX_GPIO98__FUNC_GPIO98>; + output-low; + }; + + pins2 { + pinmux = <PINMUX_GPIO9__FUNC_GPIO9>; + input-enable; + bias-disable; + }; + }; + + en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins { + pins { + pinmux = <PINMUX_GPIO29__FUNC_GPIO29>; + output-low; + }; + }; + + en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins { + pins { + pinmux = <PINMUX_GPIO30__FUNC_GPIO30>; + output-low; + }; + }; + + en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins { + pins { + pinmux = <PINMUX_GPIO31__FUNC_GPIO31>; + output-low; + }; + }; +};