diff mbox series

[1/2] arm64: dts: mt7622: add port@5 as CPU port

Message ID 20240219-for-mediatek-v1-1-7078f23eab82@arinc9.com (mailing list archive)
State New, archived
Headers show
Series Add port@5 as CPU port on certain MT7622 and MT7986 boards | expand

Commit Message

Arınç ÜNAL via B4 Relay Feb. 19, 2024, 9:36 a.m. UTC 
From: Arınç ÜNAL <arinc.unal@arinc9.com>

On Banana Pi BPI-R64 and MediaTek MT7622 RFB1 board, port 5 of the MT7531
switch is connected to the second MAC of the SoC as a CPU port. Add the
port and set up the second MAC on the bindings.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 .../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts  | 12 +++++++++++
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts       | 24 ++++++++++++++++++++++
 2 files changed, 36 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 850b3e277368..224bb289660c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -186,6 +186,18 @@  port@4 {
 					label = "lan3";
 				};
 
+				port@5 {
+					reg = <5>;
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 5c26021fc4cf..41629769bdc8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -118,6 +118,18 @@  fixed-link {
 		};
 	};
 
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -156,6 +168,18 @@  port@4 {
 					label = "wan";
 				};
 
+				port@5 {
+					reg = <5>;
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";