diff mbox series

[net-next] net: airoha: configure hw mac address according to the port id

Message ID 20240819-airoha-eth-wan-mac-addr-v1-1-e8d7c13b3182@kernel.org (mailing list archive)
State New
Headers show
Series [net-next] net: airoha: configure hw mac address according to the port id | expand

Commit Message

Lorenzo Bianconi Aug. 19, 2024, 11:10 a.m. UTC
GDM1 port on EN7581 SoC is connected to the lan dsa switch.
GDM{2,3,4} can be used as wan port connected to an external
phy module. Configure hw mac address registers according to the port id.

---
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/net/ethernet/mediatek/airoha_eth.c | 33 +++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 7 deletions(-)


---
base-commit: a99ef548bba01435f19137cf1670861be1c1ee4b
change-id: 20240819-airoha-eth-wan-mac-addr-0463b2bd89aa
prerequisite-change-id: 20240705-for-6-11-bpf-a349efc08df8:v2

Best regards,

Comments

Jacob Keller Aug. 20, 2024, 9:43 p.m. UTC | #1
On 8/19/2024 4:10 AM, Lorenzo Bianconi wrote:
> GDM1 port on EN7581 SoC is connected to the lan dsa switch.
> GDM{2,3,4} can be used as wan port connected to an external
> phy module. Configure hw mac address registers according to the port id.
> 
> ---
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Jakub Kicinski Aug. 20, 2024, 10:33 p.m. UTC | #2
On Mon, 19 Aug 2024 13:10:09 +0200 Lorenzo Bianconi wrote:
> GDM1 port on EN7581 SoC is connected to the lan dsa switch.
> GDM{2,3,4} can be used as wan port connected to an external
> phy module. Configure hw mac address registers according to the port id.
> 
> ---
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>

nit: sign-off under ---

>  drivers/net/ethernet/mediatek/airoha_eth.c | 33 +++++++++++++++++++++++-------
>  1 file changed, 26 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/ethernet/mediatek/airoha_eth.c b/drivers/net/ethernet/mediatek/airoha_eth.c
> index 1fb46db0c1e9..4914565c2fac 100644
> --- a/drivers/net/ethernet/mediatek/airoha_eth.c
> +++ b/drivers/net/ethernet/mediatek/airoha_eth.c
> @@ -67,6 +67,10 @@
>  #define FE_RST_GDM3_MBI_ARB_MASK	BIT(2)
>  #define FE_RST_CORE_MASK		BIT(0)
>  
> +#define REG_FE_WAN_MAC_H		0x0030
> +#define REG_FE_WAN_MAC_LMIN		0x0034
> +#define REG_FE_WAN_MAC_LMAX		0x0038
> +
>  #define REG_FE_LAN_MAC_H		0x0040
>  #define REG_FE_LAN_MAC_LMIN		0x0044
>  #define REG_FE_LAN_MAC_LMAX		0x0048

Isn't it better to define the base address and offsets?

#define REG_FE_MAC_BASE_WAN	0x0030
#define REG_FE_MAC_BASE_LAN	0x0040
#define REG_FE_MAC_OFF_H		0x00
#define REG_FE_MAC_OFF_LMIN		0x04
#define REG_FE_MAC_OFF_LMAX		0x08

Then you only need to select the base and the rest of the code won't
have conditionals (marginally improving readability)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mediatek/airoha_eth.c b/drivers/net/ethernet/mediatek/airoha_eth.c
index 1fb46db0c1e9..4914565c2fac 100644
--- a/drivers/net/ethernet/mediatek/airoha_eth.c
+++ b/drivers/net/ethernet/mediatek/airoha_eth.c
@@ -67,6 +67,10 @@ 
 #define FE_RST_GDM3_MBI_ARB_MASK	BIT(2)
 #define FE_RST_CORE_MASK		BIT(0)
 
+#define REG_FE_WAN_MAC_H		0x0030
+#define REG_FE_WAN_MAC_LMIN		0x0034
+#define REG_FE_WAN_MAC_LMAX		0x0038
+
 #define REG_FE_LAN_MAC_H		0x0040
 #define REG_FE_LAN_MAC_LMIN		0x0044
 #define REG_FE_LAN_MAC_LMAX		0x0048
@@ -900,16 +904,31 @@  static void airoha_qdma_irq_disable(struct airoha_qdma *qdma, int index,
 	airoha_qdma_set_irqmask(qdma, index, mask, 0);
 }
 
-static void airoha_set_macaddr(struct airoha_eth *eth, const u8 *addr)
+static bool airhoa_is_lan_gdm_port(struct airoha_gdm_port *port)
 {
-	u32 val;
+	/* GDM1 port on EN7581 SoC is connected to the lan dsa switch.
+	 * GDM{2,3,4} can be used as wan port connected to an external
+	 * phy module.
+	 */
+	return port->id == 1;
+}
+
+static void airoha_set_macaddr(struct airoha_gdm_port *port, const u8 *addr)
+{
+	bool is_lan_port = airhoa_is_lan_gdm_port(port);
+	struct airoha_eth *eth = port->qdma->eth;
+	u32 val, reg;
 
 	val = (addr[0] << 16) | (addr[1] << 8) | addr[2];
-	airoha_fe_wr(eth, REG_FE_LAN_MAC_H, val);
+	reg = is_lan_port ? REG_FE_LAN_MAC_H : REG_FE_WAN_MAC_H;
+	airoha_fe_wr(eth, reg, val);
 
 	val = (addr[3] << 16) | (addr[4] << 8) | addr[5];
-	airoha_fe_wr(eth, REG_FE_LAN_MAC_LMIN, val);
-	airoha_fe_wr(eth, REG_FE_LAN_MAC_LMAX, val);
+	reg = is_lan_port ? REG_FE_LAN_MAC_LMIN : REG_FE_WAN_MAC_LMIN;
+	airoha_fe_wr(eth, reg, val);
+
+	reg = is_lan_port ? REG_FE_LAN_MAC_LMAX : REG_FE_WAN_MAC_LMAX;
+	airoha_fe_wr(eth, reg, val);
 }
 
 static void airoha_set_gdm_port_fwd_cfg(struct airoha_eth *eth, u32 addr,
@@ -2340,7 +2359,7 @@  static int airoha_dev_set_macaddr(struct net_device *dev, void *p)
 	if (err)
 		return err;
 
-	airoha_set_macaddr(port->qdma->eth, dev->dev_addr);
+	airoha_set_macaddr(port, dev->dev_addr);
 
 	return 0;
 }
@@ -2349,7 +2368,7 @@  static int airoha_dev_init(struct net_device *dev)
 {
 	struct airoha_gdm_port *port = netdev_priv(dev);
 
-	airoha_set_macaddr(port->qdma->eth, dev->dev_addr);
+	airoha_set_macaddr(port, dev->dev_addr);
 
 	return 0;
 }