@@ -2016,6 +2016,10 @@ efuse: efuse@11f20000 {
#address-cells = <1>;
#size-cells = <1>;
+ dp_calib_data: dp-calib@1a0 {
+ reg = <0x1a0 0xc>;
+ };
+
lvts_efuse_data1: lvts1-calib@1ac {
reg = <0x1ac 0x40>;
};
@@ -2877,5 +2881,27 @@ padding7: padding@1c124000 {
power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x4000 0x1000>;
};
+
+ edp_tx: edp-tx@1c500000 {
+ compatible = "mediatek,mt8188-edp-tx";
+ reg = <0 0x1c500000 0 0x8000>;
+ interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
+ nvmem-cells = <&dp_calib_data>;
+ nvmem-cell-names = "dp_calibration_data";
+ power-domains = <&spm MT8188_POWER_DOMAIN_EDP_TX>;
+ max-linkrate-mhz = <8100>;
+ status = "disabled";
+ };
+
+ dp_tx: dp-tx@1c600000 {
+ compatible = "mediatek,mt8188-dp-tx";
+ reg = <0 0x1c600000 0 0x8000>;
+ interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+ nvmem-cells = <&dp_calib_data>;
+ nvmem-cell-names = "dp_calibration_data";
+ power-domains = <&spm MT8188_POWER_DOMAIN_DP_TX>;
+ max-linkrate-mhz = <5400>;
+ status = "disabled";
+ };
};
};
Add edp-tx and dp-tx nodes for the Embedded DisplayPort (eDP) and DisplayPort ports to connect to DP-INTF ports and panels, and add the efuse cell for the DP calibration data. Individual board device tree should enable the nodes and connect input and output ports as needed. Signed-off-by: Fei Shao <fshao@chromium.org> --- (no changes since v1) arch/arm64/boot/dts/mediatek/mt8188.dtsi | 26 ++++++++++++++++++++++++ 1 file changed, 26 insertions(+)