[net-next,v3,3/3] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY

Message ID	20241106122254.13228-4-ansuelsmth@gmail.com (mailing list archive)
State	New
Headers	show Return-Path: <linux-mediatek-bounces+linux-mediatek=archiver.kernel.org@lists.infradead.org> From: Christian Marangi <ansuelsmth@gmail.com> To: Christian Marangi <ansuelsmth@gmail.com>, Andrew Lunn <andrew@lunn.ch>, Florian Fainelli <f.fainelli@gmail.com>, Vladimir Oltean <olteanv@gmail.com>, "David S. Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>, Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Conor Dooley <conor+dt@kernel.org>, Heiner Kallweit <hkallweit1@gmail.com>, Russell King <linux@armlinux.org.uk>, Matthias Brugger <matthias.bgg@gmail.com>, AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, upstream@airoha.com Subject: [net-next PATCH v3 3/3] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY Date: Wed, 6 Nov 2024 13:22:38 +0100 Message-ID: <20241106122254.13228-4-ansuelsmth@gmail.com> In-Reply-To: <20241106122254.13228-1-ansuelsmth@gmail.com> References: <20241106122254.13228-1-ansuelsmth@gmail.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: list Sender: "Linux-mediatek" <linux-mediatek-bounces@lists.infradead.org> Errors-To: linux-mediatek-bounces+linux-mediatek=archiver.kernel.org@lists.infradead.org
Series	net: dsa: Add Airoha AN8855 support \| expand [net-next,v3,0/3] net: dsa: Add Airoha AN8855 support [net-next,v3,1/3] dt-bindings: net: dsa: Add Airoha AN8855 Gigabit Switch documentation [net-next,v3,2/3] net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver [net-next,v3,3/3] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY

diff --git a/MAINTAINERS b/MAINTAINERS index e3077d9feee2..cf34add2a0bb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -726,6 +726,7 @@ S: Maintained F: Documentation/devicetree/bindings/net/dsa/airoha,an8855.yaml F: drivers/net/dsa/an8855.c F: drivers/net/dsa/an8855.h +F: drivers/net/phy/air_an8855.c AIROHA ETHERNET DRIVER M: Lorenzo Bianconi <lorenzo@kernel.org> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index ee3ea0b56d48..1d474038ea7f 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -79,6 +79,11 @@ config SFP comment "MII PHY device drivers" +config AIR_AN8855_PHY + tristate "Airoha AN8855 Internal Gigabit PHY" + help + Currently supports the internal Airoha AN8855 Switch PHY. + config AIR_EN8811H_PHY tristate "Airoha EN8811H 2.5 Gigabit PHY" help diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 90f886844381..baba7894785b 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -35,6 +35,7 @@ obj-y += $(sfp-obj-y) $(sfp-obj-m) obj-$(CONFIG_ADIN_PHY) += adin.o obj-$(CONFIG_ADIN1100_PHY) += adin1100.o +obj-$(CONFIG_AIR_AN8855_PHY) += air_an8855.o obj-$(CONFIG_AIR_EN8811H_PHY) += air_en8811h.o obj-$(CONFIG_AMD_PHY) += amd.o obj-$(CONFIG_AMCC_QT2025_PHY) += qt2025.o diff --git a/drivers/net/phy/air_an8855.c b/drivers/net/phy/air_an8855.c new file mode 100644 index 000000000000..0c518fd62f88 --- /dev/null +++ b/drivers/net/phy/air_an8855.c @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Christian Marangi <ansuelsmth@gmail.com> + */ + +#include <linux/phy.h> +#include <linux/module.h> +#include <linux/bitfield.h> +#include <linux/nvmem-consumer.h> + +#define AN8855_PHY_SELECT_PAGE 0x1f +/* Mask speculation based on page up to 0x4 */ +#define AN8855_PHY_PAGE GENMASK(2, 0) +#define AN8855_PHY_PAGE_STANDARD FIELD_PREP_CONST(AN8855_PHY_PAGE, 0x0) +#define AN8855_PHY_PAGE_EXTENDED_1 FIELD_PREP_CONST(AN8855_PHY_PAGE, 0x1) + +/* MII Registers Page 1 */ +#define AN8855_PHY_EXT_REG_14 0x14 +#define AN8855_PHY_EN_DOWN_SHFIT BIT(4) + +/* R50 Calibration regs in MDIO_MMD_VEND1 */ +#define AN8855_PHY_R500HM_RSEL_TX_AB 0x174 +#define AN8855_PHY_R50OHM_RSEL_TX_A_EN BIT(15) +#define AN8855_PHY_R50OHM_RSEL_TX_A GENMASK(14, 8) +#define AN8855_PHY_R50OHM_RSEL_TX_B_EN BIT(7) +#define AN8855_PHY_R50OHM_RSEL_TX_B GENMASK(6, 0) +#define AN8855_PHY_R500HM_RSEL_TX_CD 0x175 +#define AN8855_PHY_R50OHM_RSEL_TX_C_EN BIT(15) +#define AN8855_PHY_R50OHM_RSEL_TX_C GENMASK(14, 8) +#define AN8855_PHY_R50OHM_RSEL_TX_D_EN BIT(7) +#define AN8855_PHY_R50OHM_RSEL_TX_D GENMASK(6, 0) + +#define AN8855_SWITCH_EFUSE_R50O GENMASK(30, 24) + +/* PHY TX PAIR DELAY SELECT Register */ +#define AN8855_PHY_TX_PAIR_DLY_SEL_GBE 0x013 +#define AN8855_PHY_CR_DA_TX_PAIR_DELKAY_SEL_A_GBE GENMASK(14, 12) +#define AN8855_PHY_CR_DA_TX_PAIR_DELKAY_SEL_B_GBE GENMASK(10, 8) +#define AN8855_PHY_CR_DA_TX_PAIR_DELKAY_SEL_C_GBE GENMASK(6, 4) +#define AN8855_PHY_CR_DA_TX_PAIR_DELKAY_SEL_D_GBE GENMASK(2, 0) +/* PHY ADC Register */ +#define AN8855_PHY_RXADC_CTRL 0x0d8 +#define AN8855_PHY_RG_AD_SAMNPLE_PHSEL_A BIT(12) +#define AN8855_PHY_RG_AD_SAMNPLE_PHSEL_B BIT(8) +#define AN8855_PHY_RG_AD_SAMNPLE_PHSEL_C BIT(4) +#define AN8855_PHY_RG_AD_SAMNPLE_PHSEL_D BIT(0) +#define AN8855_PHY_RXADC_REV_0 0x0d9 +#define AN8855_PHY_RG_AD_RESERVE0_A GENMASK(15, 8) +#define AN8855_PHY_RG_AD_RESERVE0_B GENMASK(7, 0) +#define AN8855_PHY_RXADC_REV_1 0x0da +#define AN8855_PHY_RG_AD_RESERVE0_C GENMASK(15, 8) +#define AN8855_PHY_RG_AD_RESERVE0_D GENMASK(7, 0) + +#define AN8855_PHY_ID 0xc0ff0410 + +struct air_an8855_priv { + u8 calibration_data[4]; +}; + +static const u8 dsa_r50ohm_table[] = { + 127, 127, 127, 127, 127, 127, 127, 127, 127, 127, + 127, 127, 127, 127, 127, 127, 127, 126, 122, 117, + 112, 109, 104, 101, 97, 94, 90, 88, 84, 80, + 78, 74, 72, 68, 66, 64, 61, 58, 56, 53, + 51, 48, 47, 44, 42, 40, 38, 36, 34, 32, + 31, 28, 27, 24, 24, 22, 20, 18, 16, 16, + 14, 12, 11, 9 +}; + +static int en8855_get_r50ohm_val(struct device *dev, const char *calib_name, + u8 *dest) +{ + u32 shift_sel, val; + int ret; + int i; + + ret = nvmem_cell_read_u32(dev, calib_name, &val); + if (ret) + return ret; + + shift_sel = FIELD_GET(AN8855_SWITCH_EFUSE_R50O, val); + for (i = 0; i < ARRAY_SIZE(dsa_r50ohm_table); i++) + if (dsa_r50ohm_table[i] == shift_sel) + break; + + if (i < 8 || i >= ARRAY_SIZE(dsa_r50ohm_table)) + *dest = dsa_r50ohm_table[25]; + else + *dest = dsa_r50ohm_table[i - 8]; + + return 0; +} + +static int an8855_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct device_node *node = dev->of_node; + struct air_an8855_priv *priv; + int ret; + + /* If we don't have a node, skip get calib */ + if (!node) + return 0; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + ret = en8855_get_r50ohm_val(dev, "tx_a", &priv->calibration_data[0]); + if (ret) + return ret; + + ret = en8855_get_r50ohm_val(dev, "tx_b", &priv->calibration_data[1]); + if (ret) + return ret; + + ret = en8855_get_r50ohm_val(dev, "tx_c", &priv->calibration_data[2]); + if (ret) + return ret; + + ret = en8855_get_r50ohm_val(dev, "tx_d", &priv->calibration_data[3]); + if (ret) + return ret; + + phydev->priv = priv; + + return 0; +} + +static int an8855_get_downshift(struct phy_device *phydev, u8 *data) +{ + int saved_page; + int val; + int ret; + + saved_page = phy_select_page(phydev, AN8855_PHY_PAGE_EXTENDED_1); + if (saved_page >= 0) + val = __phy_read(phydev, AN8855_PHY_EXT_REG_14); + ret = phy_restore_page(phydev, saved_page, val); + if (ret) + return ret; + + *data = val & AN8855_PHY_EXT_REG_14 ? DOWNSHIFT_DEV_DEFAULT_COUNT : + DOWNSHIFT_DEV_DISABLE; + + return 0; +} + +static int an8855_set_downshift(struct phy_device *phydev, u8 cnt) +{ + int saved_page; + int ret; + + saved_page = phy_select_page(phydev, AN8855_PHY_PAGE_EXTENDED_1); + if (saved_page >= 0) { + if (cnt != DOWNSHIFT_DEV_DISABLE) + ret = __phy_set_bits(phydev, AN8855_PHY_EXT_REG_14, + AN8855_PHY_EN_DOWN_SHFIT); + else + ret = __phy_clear_bits(phydev, AN8855_PHY_EXT_REG_14, + AN8855_PHY_EN_DOWN_SHFIT); + } + + return phy_restore_page(phydev, saved_page, ret); +} + +static int an8855_config_init(struct phy_device *phydev) +{ + struct air_an8855_priv *priv = phydev->priv; + int ret; + + /* Enable HW auto downshift */ + ret = an8855_set_downshift(phydev, DOWNSHIFT_DEV_DEFAULT_COUNT); + if (ret) + return ret; + + /* Apply calibration values, if needed. BIT(0) signal this */ + if (phydev->dev_flags & BIT(0)) { + u8 *calibration_data = priv->calibration_data; + + ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, AN8855_PHY_R500HM_RSEL_TX_AB, + AN8855_PHY_R50OHM_RSEL_TX_A | AN8855_PHY_R50OHM_RSEL_TX_B, + FIELD_PREP(AN8855_PHY_R50OHM_RSEL_TX_A, calibration_data[0]) | + FIELD_PREP(AN8855_PHY_R50OHM_RSEL_TX_B, calibration_data[1])); + if (ret) + return ret; + ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, AN8855_PHY_R500HM_RSEL_TX_CD, + AN8855_PHY_R50OHM_RSEL_TX_C | AN8855_PHY_R50OHM_RSEL_TX_D, + FIELD_PREP(AN8855_PHY_R50OHM_RSEL_TX_C, calibration_data[2]) | + FIELD_PREP(AN8855_PHY_R50OHM_RSEL_TX_D, calibration_data[3])); + if (ret) + return ret; + } + + /* Apply values to reduce signal noise */ + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AN8855_PHY_TX_PAIR_DLY_SEL_GBE, + FIELD_PREP(AN8855_PHY_CR_DA_TX_PAIR_DELKAY_SEL_A_GBE, 0x4) | + FIELD_PREP(AN8855_PHY_CR_DA_TX_PAIR_DELKAY_SEL_C_GBE, 0x4)); + if (ret) + return ret; + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AN8855_PHY_RXADC_CTRL, + AN8855_PHY_RG_AD_SAMNPLE_PHSEL_A | + AN8855_PHY_RG_AD_SAMNPLE_PHSEL_C); + if (ret) + return ret; + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AN8855_PHY_RXADC_REV_0, + FIELD_PREP(AN8855_PHY_RG_AD_RESERVE0_A, 0x1)); + if (ret) + return ret; + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AN8855_PHY_RXADC_REV_1, + FIELD_PREP(AN8855_PHY_RG_AD_RESERVE0_C, 0x1)); + if (ret) + return ret; + + return 0; +} + +static int an8855_get_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return an8855_get_downshift(phydev, data); + default: + return -EOPNOTSUPP; + } +} + +static int an8855_set_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, const void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return an8855_set_downshift(phydev, *(const u8 *)data); + default: + return -EOPNOTSUPP; + } +} + +static int an8855_read_page(struct phy_device *phydev) +{ + return __phy_read(phydev, AN8855_PHY_SELECT_PAGE); +} + +static int an8855_write_page(struct phy_device *phydev, int page) +{ + return __phy_write(phydev, AN8855_PHY_SELECT_PAGE, page); +} + +static struct phy_driver an8855_driver[] = { +{ + PHY_ID_MATCH_EXACT(AN8855_PHY_ID), + .name = "Airoha AN8855 internal PHY", + /* PHY_GBIT_FEATURES */ + .flags = PHY_IS_INTERNAL, + .probe = an8855_probe, + .config_init = an8855_config_init, + .soft_reset = genphy_soft_reset, + .get_tunable = an8855_get_tunable, + .set_tunable = an8855_set_tunable, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_page = an8855_read_page, + .write_page = an8855_write_page, +}, }; + +module_phy_driver(an8855_driver); + +static struct mdio_device_id __maybe_unused an8855_tbl[] = { + { PHY_ID_MATCH_EXACT(AN8855_PHY_ID) }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, an8855_tbl); + +MODULE_DESCRIPTION("Airoha AN8855 PHY driver"); +MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>"); +MODULE_LICENSE("GPL");

[net-next,v3,3/3] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY

Commit Message

Comments

Patch