diff mbox series

[06/17] wifi: mt76: mt7925: fix wrong parameter for related cmd of chan info

Message ID 20241211011926.5002-6-sean.wang@kernel.org (mailing list archive)
State New
Headers show
Series [01/17] wifi: mt76: connac: Extend mt76_connac_mcu_uni_add_dev for MLO | expand

Commit Message

Sean Wang Dec. 11, 2024, 1:19 a.m. UTC 
From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>

Fix incorrect parameters for the related channel information command.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 .../net/wireless/mediatek/mt76/mt7925/mcu.c   | 23 +++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index 83f237d49c26..f6aa052ca802 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -1200,6 +1200,8 @@  int mt7925_mcu_set_mlo_roc(struct mt792x_bss_conf *mconf, u16 sel_links,
 		req.roc[i].bw_from_ap = CMD_CBW_20MHZ;
 		req.roc[i].center_chan = center_ch;
 		req.roc[i].center_chan_from_ap = center_ch;
+		req.roc[i].center_chan2 = 0;
+		req.roc[i].center_chan2_from_ap = 0;
 
 		/* STR : 0xfe indicates BAND_ALL with enabling DBDC
 		 * EMLSR : 0xff indicates (BAND_AUTO) without DBDC
@@ -2177,11 +2179,27 @@  void mt7925_mcu_bss_rlm_tlv(struct sk_buff *skb, struct mt76_phy *phy,
 	req = (struct bss_rlm_tlv *)tlv;
 	req->control_channel = chandef->chan->hw_value;
 	req->center_chan = ieee80211_frequency_to_channel(freq1);
-	req->center_chan2 = ieee80211_frequency_to_channel(freq2);
+	req->center_chan2 = 0;
 	req->tx_streams = hweight8(phy->antenna_mask);
 	req->ht_op_info = 4; /* set HT 40M allowed */
 	req->rx_streams = hweight8(phy->antenna_mask);
-	req->band = band;
+	req->center_chan2 = 0;
+	req->sco = 0;
+	req->band = 1;
+
+	switch (band) {
+	case NL80211_BAND_2GHZ:
+		req->band = 1;
+		break;
+	case NL80211_BAND_5GHZ:
+		req->band = 2;
+		break;
+	case NL80211_BAND_6GHZ:
+		req->band = 3;
+		break;
+	default:
+		break;
+	}
 
 	switch (chandef->width) {
 	case NL80211_CHAN_WIDTH_40:
@@ -2192,6 +2210,7 @@  void mt7925_mcu_bss_rlm_tlv(struct sk_buff *skb, struct mt76_phy *phy,
 		break;
 	case NL80211_CHAN_WIDTH_80P80:
 		req->bw = CMD_CBW_8080MHZ;
+		req->center_chan2 = ieee80211_frequency_to_channel(freq2);
 		break;
 	case NL80211_CHAN_WIDTH_160:
 		req->bw = CMD_CBW_160MHZ;