diff mbox series

[6/6] wifi: mt76: mt7925: add MTCL support to enhance the reulatory compliance

Message ID 20250226075123.3981253-6-mingyen.hsieh@mediatek.com (mailing list archive)
State New
Headers show
Series [1/6] wifi: mt76: mt7925: load the appropriate CLC data based on hardware type | expand

Commit Message

Mingyen Hsieh Feb. 26, 2025, 7:51 a.m. UTC 
From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>

Apply the MTCL configuration to improving channel availability and
regulatory compliance if MTCL table is supported.

Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
---
 .../net/wireless/mediatek/mt76/mt7925/init.c    | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/init.c b/drivers/net/wireless/mediatek/mt76/mt7925/init.c
index 8561ab310f16..1bd30a857be5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/init.c
@@ -64,8 +64,15 @@  void mt7925_regd_be_ctrl(struct mt792x_dev *dev, u8 *alpha2)
 	struct mt7925_clc_rule_v2 *rule;
 	struct mt7925_clc *clc;
 	bool old = dev->has_eht, new = true;
+	u32 mtcl_conf = mt792x_acpi_get_mtcl_conf(&dev->phy, alpha2);
 	u8 *pos;
 
+	if (mtcl_conf != MT792X_ACPI_MTCL_INVALID &&
+	    (((mtcl_conf >> 4) & 0x3) == 0)) {
+		new = false;
+		goto out;
+	}
+
 	if (!phy->clc[MT792x_CLC_BE_CTRL])
 		goto out;
 
@@ -101,11 +108,21 @@  mt7925_regd_channel_update(struct wiphy *wiphy, struct mt792x_dev *dev)
 {
 #define IS_UNII_INVALID(idx, sfreq, efreq) \
 	(!(dev->phy.clc_chan_conf & BIT(idx)) && (cfreq) >= (sfreq) && (cfreq) <= (efreq))
+#define MT7925_UNII_59G_IS_VALID	0x1
+#define MT7925_UNII_6G_IS_VALID	0x1e
 	struct ieee80211_supported_band *sband;
 	struct mt76_dev *mdev = &dev->mt76;
 	struct ieee80211_channel *ch;
+	u32 mtcl_conf = mt792x_acpi_get_mtcl_conf(&dev->phy, mdev->alpha2);
 	int i, cfreq;
 
+	if (mtcl_conf != MT792X_ACPI_MTCL_INVALID) {
+		if ((mtcl_conf & 0x3) == 0)
+			dev->phy.clc_chan_conf &= ~MT7925_UNII_59G_IS_VALID;
+		if (((mtcl_conf >> 2) & 0x3) == 0)
+			dev->phy.clc_chan_conf &= ~MT7925_UNII_6G_IS_VALID;
+	}
+
 	sband = wiphy->bands[NL80211_BAND_5GHZ];
 	if (!sband)
 		return;