@@ -1302,6 +1302,50 @@ mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state)
FID_PST(FID_BRIDGED, stp_state));
}
+static void mt7530_update_port_member(struct mt7530_priv *priv, int port,
+ const struct net_device *bridge_dev, bool join)
+ __must_hold(&priv->reg_mutex)
+{
+ struct dsa_port *dp = dsa_to_port(priv->ds, port), *other_dp;
+ struct mt7530_port *p = &priv->ports[port], *other_p;
+ struct dsa_port *cpu_dp = dp->cpu_dp;
+ u32 port_bitmap = BIT(cpu_dp->index);
+ int other_port;
+
+ dsa_switch_for_each_user_port(other_dp, priv->ds) {
+ other_port = other_dp->index;
+ other_p = &priv->ports[other_port];
+
+ if (dp == other_dp)
+ continue;
+
+ /* Add/remove this port to/from the port matrix of the other
+ * ports in the same bridge. If the port is disabled, port
+ * matrix is kept and not being setup until the port becomes
+ * enabled.
+ */
+ if (!dsa_port_offloads_bridge_dev(other_dp, bridge_dev))
+ continue;
+
+ if (join) {
+ other_p->pm |= PCR_MATRIX(BIT(port));
+ port_bitmap |= BIT(other_port);
+ } else {
+ other_p->pm &= ~PCR_MATRIX(BIT(port));
+ }
+
+ if (other_p->enable)
+ mt7530_rmw(priv, MT7530_PCR_P(other_port),
+ PCR_MATRIX_MASK, other_p->pm);
+ }
+
+ /* Add/remove the all other ports to this port matrix. */
+ p->pm = PCR_MATRIX(port_bitmap);
+ if (priv->ports[port].enable)
+ mt7530_rmw(priv, MT7530_PCR_P(port),
+ PCR_MATRIX_MASK, p->pm);
+}
+
static int
mt7530_port_pre_bridge_flags(struct dsa_switch *ds, int port,
struct switchdev_brport_flags flags,
@@ -1345,39 +1389,11 @@ mt7530_port_bridge_join(struct dsa_switch *ds, int port,
struct dsa_bridge bridge, bool *tx_fwd_offload,
struct netlink_ext_ack *extack)
{
- struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
- struct dsa_port *cpu_dp = dp->cpu_dp;
- u32 port_bitmap = BIT(cpu_dp->index);
struct mt7530_priv *priv = ds->priv;
mutex_lock(&priv->reg_mutex);
- dsa_switch_for_each_user_port(other_dp, ds) {
- int other_port = other_dp->index;
-
- if (dp == other_dp)
- continue;
-
- /* Add this port to the port matrix of the other ports in the
- * same bridge. If the port is disabled, port matrix is kept
- * and not being setup until the port becomes enabled.
- */
- if (!dsa_port_offloads_bridge(other_dp, &bridge))
- continue;
-
- if (priv->ports[other_port].enable)
- mt7530_set(priv, MT7530_PCR_P(other_port),
- PCR_MATRIX(BIT(port)));
- priv->ports[other_port].pm |= PCR_MATRIX(BIT(port));
-
- port_bitmap |= BIT(other_port);
- }
-
- /* Add the all other ports to this port matrix. */
- if (priv->ports[port].enable)
- mt7530_rmw(priv, MT7530_PCR_P(port),
- PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap));
- priv->ports[port].pm |= PCR_MATRIX(port_bitmap);
+ mt7530_update_port_member(priv, port, bridge.dev, true);
/* Set to fallback mode for independent VLAN learning */
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
@@ -1478,38 +1494,11 @@ static void
mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
struct dsa_bridge bridge)
{
- struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
- struct dsa_port *cpu_dp = dp->cpu_dp;
struct mt7530_priv *priv = ds->priv;
mutex_lock(&priv->reg_mutex);
- dsa_switch_for_each_user_port(other_dp, ds) {
- int other_port = other_dp->index;
-
- if (dp == other_dp)
- continue;
-
- /* Remove this port from the port matrix of the other ports
- * in the same bridge. If the port is disabled, port matrix
- * is kept and not being setup until the port becomes enabled.
- */
- if (!dsa_port_offloads_bridge(other_dp, &bridge))
- continue;
-
- if (priv->ports[other_port].enable)
- mt7530_clear(priv, MT7530_PCR_P(other_port),
- PCR_MATRIX(BIT(port)));
- priv->ports[other_port].pm &= ~PCR_MATRIX(BIT(port));
- }
-
- /* Set the cpu port to be the only one in the port matrix of
- * this port.
- */
- if (priv->ports[port].enable)
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
- PCR_MATRIX(BIT(cpu_dp->index)));
- priv->ports[port].pm = PCR_MATRIX(BIT(cpu_dp->index));
+ mt7530_update_port_member(priv, port, bridge.dev, false);
/* When a port is removed from the bridge, the port would be set up
* back to the default as is at initial boot which is a VLAN-unaware
As preparation for implementing bridge port isolation, move the logic to add and remove bits in the port matrix into a new helper mt7530_update_port_member(), which is called from mt7530_port_bridge_join() and mt7530_port_bridge_leave(). No functional change intended. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> --- v2: no changes drivers/net/dsa/mt7530.c | 103 +++++++++++++++++---------------------- 1 file changed, 46 insertions(+), 57 deletions(-)