From patchwork Fri Sep 4 14:21:57 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?TGFuZGVuIENoYW8gKOi2meeajuWujyk=?= X-Patchwork-Id: 11757419 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 253B8618 for ; Fri, 4 Sep 2020 14:23:16 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id E2D8D2074A for ; Fri, 4 Sep 2020 14:23:15 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="rrWJagxd"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mediatek.com header.i=@mediatek.com header.b="LAmqHOpX" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org E2D8D2074A Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=mediatek.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-ID:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=JEXTTtmUl0bM/iiKzsHLOvuAnFsROgghX5DhdfpLWHc=; b=rrWJagxdLP+ZfEYKx3Ij5HbFR VSQ/RrpAYr6DlhA33gz96lF/NqZWlnZh4EK3T7X6QPmM8IOF1qT1YB6fxNkQyXar/IMSxhb9KXjK+ 3VwL4dpjUaQ39nNrNNYrfsdoeKr+xzkYDRsQB3O3qedwrvv4Y6MbhEDfJAm/RJ0G8EdKMe7n9i9w0 UdC/3WkY2pZLrPInknB1X+VTxmX0sshuIYWqCXSIZh6bEmP4PGTIVEzCDKhA/2hbyQJKvOCUyFOx7 axLKvHBfSc1wNxuxK5rCW3tzEFgAP37IMe1E4cE0HAknHPzGIgdxefGE/QYA+4okcz/9GBn1Npij/ VHSMaAosA==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kECcS-0000pg-Pn; Fri, 04 Sep 2020 14:23:12 +0000 Received: from mailgw02.mediatek.com ([216.200.240.185]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kECbm-0000XN-6Z; Fri, 04 Sep 2020 14:22:34 +0000 X-UUID: b2c7f22512d945d7b01a991f08a3c8b1-20200904 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=mediatek.com; s=dk; h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From; bh=MJP8PGom9akaEeuvr9oNH5y9hrbi5PMTHy6BygYgAYU=; b=LAmqHOpXW+cgiokUIlKOOlMq1J6ZKER2EPXMG57rWkNWU9f8VPZQiCoVREWbtdtRNhD1yXNoQ3seWRA1S58T0ebih68NaeR1jFDclkvKENU96DZ7bfqMpPTjW85NOQdbbczQGBVeBtUsP7sk3TTOlsCloPUvgO6fR8zvd0y15Sc=; X-UUID: b2c7f22512d945d7b01a991f08a3c8b1-20200904 Received: from mtkcas67.mediatek.inc [(172.29.193.45)] by mailgw02.mediatek.com (envelope-from ) (musrelay.mediatek.com ESMTP with TLSv1.2 ECDHE-RSA-AES256-SHA384 256/256) with ESMTP id 582233030; Fri, 04 Sep 2020 06:22:26 -0800 Received: from MTKMBS07N2.mediatek.inc (172.21.101.141) by MTKMBS62DR.mediatek.inc (172.29.94.18) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Fri, 4 Sep 2020 07:22:24 -0700 Received: from MTKCAS06.mediatek.inc (172.21.101.30) by mtkmbs07n2.mediatek.inc (172.21.101.141) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Fri, 4 Sep 2020 22:22:20 +0800 Received: from mtksdccf07.mediatek.inc (172.21.84.99) by MTKCAS06.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Fri, 4 Sep 2020 22:22:21 +0800 From: Landen Chao To: Andrew Lunn , Vivien Didelot , Florian Fainelli , "David S . Miller" , Jakub Kicinski , Rob Herring , Matthias Brugger , Sean Wang , Philipp Zabel , "Russell King" Subject: [PATCH net-next v3 2/6] net: dsa: mt7530: Extend device data ready for adding a new hardware Date: Fri, 4 Sep 2020 22:21:57 +0800 Message-ID: <3cf9909d7b06346b8aa339c346e19585cccf74c8.1599228079.git.landen.chao@mediatek.com> X-Mailer: git-send-email 2.18.0 In-Reply-To: References: MIME-Version: 1.0 X-MTK: N X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200904_102230_711307_8D0BCACE X-CRM114-Status: GOOD ( 21.09 ) X-Spam-Score: -0.2 (/) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-0.2 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 SPF_PASS SPF: sender matches SPF record 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record 0.0 MIME_BASE64_TEXT RAW: Message text disguised using base64 encoding -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay lines X-BeenThere: linux-mediatek@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, dqfext@gmail.com, frank-w@public-files.de, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, opensource@vdorst.com, linux-mediatek@lists.infradead.org, Landen Chao , linux-arm-kernel@lists.infradead.org Sender: "Linux-mediatek" Errors-To: linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org Add a structure holding required operations for each device such as device initialization, PHY port read or write, a checker whether PHY interface is supported on a certain port, MAC port setup for either bus pad or a specific PHY interface. The patch is done for ready adding a new hardware MT7531, and keep the same setup logic of existing hardware. Signed-off-by: Landen Chao Signed-off-by: Sean Wang --- drivers/net/dsa/mt7530.c | 272 +++++++++++++++++++++++++++++---------- drivers/net/dsa/mt7530.h | 37 +++++- 2 files changed, 240 insertions(+), 69 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 238417db26f9..15c934f10ddd 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -372,8 +372,9 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid, mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]); } +/* Setup TX circuit including relevant PAD and driving */ static int -mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) +mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; u32 ncpo1, ssc_delta, trgint, i, xtal; @@ -387,7 +388,7 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) return -EINVAL; } - switch (mode) { + switch (interface) { case PHY_INTERFACE_MODE_RGMII: trgint = 0; /* PLL frequency: 125MHz */ @@ -409,7 +410,8 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) } break; default: - dev_err(priv->dev, "xMII mode %d not supported\n", mode); + dev_err(priv->dev, "xMII interface %d not supported\n", + interface); return -EINVAL; } @@ -1349,12 +1351,11 @@ mt7530_setup(struct dsa_switch *ds) return 0; } -static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port, - unsigned int mode, - const struct phylink_link_state *state) +static bool +mt7530_phy_mode_supported(struct dsa_switch *ds, int port, + const struct phylink_link_state *state) { struct mt7530_priv *priv = ds->priv; - u32 mcr_cur, mcr_new; switch (port) { case 0: /* Internal phy */ @@ -1363,33 +1364,114 @@ static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port, case 3: case 4: if (state->interface != PHY_INTERFACE_MODE_GMII) - return; + goto unsupported; break; case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ - if (priv->p5_interface == state->interface) - break; if (!phy_interface_mode_is_rgmii(state->interface) && state->interface != PHY_INTERFACE_MODE_MII && state->interface != PHY_INTERFACE_MODE_GMII) - return; + goto unsupported; + break; + case 6: /* 1st cpu port */ + if (state->interface != PHY_INTERFACE_MODE_RGMII && + state->interface != PHY_INTERFACE_MODE_TRGMII) + goto unsupported; + break; + default: + dev_err(priv->dev, "%s: unsupported port: %i\n", __func__, + port); + goto unsupported; + } + + return true; + +unsupported: + return false; +} + +static bool +mt753x_phy_mode_supported(struct dsa_switch *ds, int port, + const struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + + return priv->info->phy_mode_supported(ds, port, state); +} + +static int +mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + + return priv->info->pad_setup(ds, state->interface); +} + +static int +mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + phy_interface_t interface) +{ + struct mt7530_priv *priv = ds->priv; + + /* Only need to setup port5. */ + if (port != 5) + return 0; + + mt7530_setup_port5(priv->ds, interface); + + return 0; +} + +static int +mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + const struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + + return priv->info->mac_port_config(ds, port, mode, state->interface); +} + +static void +mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + const struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + u32 mcr_cur, mcr_new; + + if (!mt753x_phy_mode_supported(ds, port, state)) + goto unsupported; + + switch (port) { + case 0: /* Internal phy */ + case 1: + case 2: + case 3: + case 4: + if (state->interface != PHY_INTERFACE_MODE_GMII) + goto unsupported; + break; + case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ + if (priv->p5_interface == state->interface) + break; + + if (mt753x_mac_config(ds, port, mode, state) < 0) + goto unsupported; - mt7530_setup_port5(ds, state->interface); break; case 6: /* 1st cpu port */ if (priv->p6_interface == state->interface) break; - if (state->interface != PHY_INTERFACE_MODE_RGMII && - state->interface != PHY_INTERFACE_MODE_TRGMII) - return; + mt753x_pad_setup(ds, state); - /* Setup TX circuit incluing relevant PAD and driving */ - mt7530_pad_clk_setup(ds, state->interface); + if (mt753x_mac_config(ds, port, mode, state) < 0) + goto unsupported; priv->p6_interface = state->interface; break; default: - dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); +unsupported: + dev_err(ds->dev, "%s: unsupported %s port: %i\n", + __func__, phy_modes(state->interface), port); return; } @@ -1453,61 +1535,44 @@ static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, mt7530_set(priv, MT7530_PMCR_P(port), mcr); } -static void mt7530_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) +static void +mt7530_mac_port_validate(struct dsa_switch *ds, int port, + unsigned long *supported) { + if (port == 5) + phylink_set(supported, 1000baseX_Full); +} + +static void +mt753x_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - switch (port) { - case 0: /* Internal phy */ - case 1: - case 2: - case 3: - case 4: - if (state->interface != PHY_INTERFACE_MODE_NA && - state->interface != PHY_INTERFACE_MODE_GMII) - goto unsupported; - break; - case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ - if (state->interface != PHY_INTERFACE_MODE_NA && - !phy_interface_mode_is_rgmii(state->interface) && - state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_GMII) - goto unsupported; - break; - case 6: /* 1st cpu port */ - if (state->interface != PHY_INTERFACE_MODE_NA && - state->interface != PHY_INTERFACE_MODE_RGMII && - state->interface != PHY_INTERFACE_MODE_TRGMII) - goto unsupported; - break; - default: - dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); -unsupported: + if (state->interface != PHY_INTERFACE_MODE_NA && + !mt753x_phy_mode_supported(ds, port, state)) { linkmode_zero(supported); return; } phylink_set_port_modes(mask); - phylink_set(mask, Autoneg); - if (state->interface == PHY_INTERFACE_MODE_TRGMII) { - phylink_set(mask, 1000baseT_Full); - } else { + if (state->interface != PHY_INTERFACE_MODE_TRGMII) { phylink_set(mask, 10baseT_Half); phylink_set(mask, 10baseT_Full); phylink_set(mask, 100baseT_Half); phylink_set(mask, 100baseT_Full); - - if (state->interface != PHY_INTERFACE_MODE_MII) { - /* This switch only supports 1G full-duplex. */ - phylink_set(mask, 1000baseT_Full); - if (port == 5) - phylink_set(mask, 1000baseX_Full); - } + phylink_set(mask, Autoneg); } + /* This switch only supports 1G full-duplex. */ + if (state->interface != PHY_INTERFACE_MODE_MII) + phylink_set(mask, 1000baseT_Full); + + priv->info->mac_port_validate(ds, port, mask); + phylink_set(mask, Pause); phylink_set(mask, Asym_Pause); @@ -1555,12 +1620,45 @@ mt7530_phylink_mac_link_state(struct dsa_switch *ds, int port, return 1; } +static int +mt753x_phylink_mac_link_state(struct dsa_switch *ds, int port, + struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + + return priv->info->mac_port_get_state(ds, port, state); +} + +static int +mt753x_setup(struct dsa_switch *ds) +{ + struct mt7530_priv *priv = ds->priv; + + return priv->info->sw_setup(ds); +} + +static int +mt753x_phy_read(struct dsa_switch *ds, int port, int regnum) +{ + struct mt7530_priv *priv = ds->priv; + + return priv->info->phy_read(ds, port, regnum); +} + +static int +mt753x_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) +{ + struct mt7530_priv *priv = ds->priv; + + return priv->info->phy_write(ds, port, regnum, val); +} + static const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, - .setup = mt7530_setup, + .setup = mt753x_setup, .get_strings = mt7530_get_strings, - .phy_read = mt7530_phy_read, - .phy_write = mt7530_phy_write, + .phy_read = mt753x_phy_read, + .phy_write = mt753x_phy_write, .get_ethtool_stats = mt7530_get_ethtool_stats, .get_sset_count = mt7530_get_sset_count, .port_enable = mt7530_port_enable, @@ -1577,16 +1675,41 @@ static const struct dsa_switch_ops mt7530_switch_ops = { .port_vlan_del = mt7530_port_vlan_del, .port_mirror_add = mt7530_port_mirror_add, .port_mirror_del = mt7530_port_mirror_del, - .phylink_validate = mt7530_phylink_validate, - .phylink_mac_link_state = mt7530_phylink_mac_link_state, - .phylink_mac_config = mt7530_phylink_mac_config, + .phylink_validate = mt753x_phylink_validate, + .phylink_mac_link_state = mt753x_phylink_mac_link_state, + .phylink_mac_config = mt753x_phylink_mac_config, .phylink_mac_link_down = mt7530_phylink_mac_link_down, .phylink_mac_link_up = mt7530_phylink_mac_link_up, }; +static const struct mt753x_info mt753x_table[] = { + [ID_MT7621] = { + .id = ID_MT7621, + .sw_setup = mt7530_setup, + .phy_read = mt7530_phy_read, + .phy_write = mt7530_phy_write, + .pad_setup = mt7530_pad_clk_setup, + .phy_mode_supported = mt7530_phy_mode_supported, + .mac_port_validate = mt7530_mac_port_validate, + .mac_port_get_state = mt7530_phylink_mac_link_state, + .mac_port_config = mt7530_mac_config, + }, + [ID_MT7530] = { + .id = ID_MT7530, + .sw_setup = mt7530_setup, + .phy_read = mt7530_phy_read, + .phy_write = mt7530_phy_write, + .pad_setup = mt7530_pad_clk_setup, + .phy_mode_supported = mt7530_phy_mode_supported, + .mac_port_validate = mt7530_mac_port_validate, + .mac_port_get_state = mt7530_phylink_mac_link_state, + .mac_port_config = mt7530_mac_config, + }, +}; + static const struct of_device_id mt7530_of_match[] = { - { .compatible = "mediatek,mt7621", .data = (void *)ID_MT7621, }, - { .compatible = "mediatek,mt7530", .data = (void *)ID_MT7530, }, + { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], }, + { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, mt7530_of_match); @@ -1627,8 +1750,21 @@ mt7530_probe(struct mdio_device *mdiodev) /* Get the hardware identifier from the devicetree node. * We will need it for some of the clock and regulator setup. */ - priv->id = (unsigned int)(unsigned long) - of_device_get_match_data(&mdiodev->dev); + priv->info = of_device_get_match_data(&mdiodev->dev); + if (!priv->info) + return -EINVAL; + + /* Sanity check if these required device operations are filled + * properly. + */ + if (!priv->info->sw_setup || !priv->info->pad_setup || + !priv->info->phy_read || !priv->info->phy_write || + !priv->info->phy_mode_supported || + !priv->info->mac_port_validate || + !priv->info->mac_port_get_state || !priv->info->mac_port_config) + return -EINVAL; + + priv->id = priv->info->id; if (priv->id == ID_MT7530) { priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 14de60d0b9ca..44ac55433089 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -11,7 +11,7 @@ #define MT7530_NUM_FDB_RECORDS 2048 #define MT7530_ALL_MEMBERS 0xff -enum { +enum mt753x_id { ID_MT7530 = 0, ID_MT7621 = 1, }; @@ -443,6 +443,40 @@ static const char *p5_intf_modes(unsigned int p5_interface) } } +/* struct mt753x_info - This is the main data structure for holding the specific + * part for each supported device + * @sw_setup: Holding the handler to a device initialization + * @phy_read: Holding the way reading PHY port + * @phy_write: Holding the way writing PHY port + * @pad_setup: Holding the way setting up the bus pad for a certain + * MAC port + * @phy_mode_supported: Check if the PHY type is being supported on a certain + * port + * @mac_port_validate: Holding the way to set addition validate type for a + * certan MAC port + * @mac_port_get_state: Holding the way getting the MAC/PCS state for a certain + * MAC port + * @mac_port_config: Holding the way setting up the PHY attribute to a + * certain MAC port + */ +struct mt753x_info { + enum mt753x_id id; + + int (*sw_setup)(struct dsa_switch *ds); + int (*phy_read)(struct dsa_switch *ds, int port, int regnum); + int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val); + int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface); + bool (*phy_mode_supported)(struct dsa_switch *ds, int port, + const struct phylink_link_state *state); + void (*mac_port_validate)(struct dsa_switch *ds, int port, + unsigned long *supported); + int (*mac_port_get_state)(struct dsa_switch *ds, int port, + struct phylink_link_state *state); + int (*mac_port_config)(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface); +}; + /* struct mt7530_priv - This is the main data structure for holding the state * of the driver * @dev: The device pointer @@ -468,6 +502,7 @@ struct mt7530_priv { struct regulator *core_pwr; struct regulator *io_pwr; struct gpio_desc *reset; + const struct mt753x_info *info; unsigned int id; bool mcm; phy_interface_t p6_interface;