| Message ID | 8e47af93563b266020924f66b2c40311304cbccd.1585902279.git.matti.vaittinen@fi.rohmeurope.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Support ROHM BD99954 charger IC | expand |
Hi, On Fri, Apr 03, 2020 at 11:45:26AM +0300, Matti Vaittinen wrote: > The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion > secondary battery. Intended to be used in space-constraint equipment such > as Low profile Notebook PC, Tablets and other applications. BD99954 > provides a Dual-source Battery Charger, two port BC1.2 detection and a > Battery Monitor. > > Document the DT bindings for BD99954 > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > Reviewed-by: Rob Herring <robh@kernel.org> > --- Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> -- Sebastian > > No changes since v7 > > .../bindings/power/supply/rohm,bd99954.yaml | 155 ++++++++++++++++++ > 1 file changed, 155 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml > > diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml > new file mode 100644 > index 000000000000..7e0f73a898c7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml > @@ -0,0 +1,155 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/power/supply/rohm,bd99954.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ROHM BD99954 Battery charger > + > +maintainers: > + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > + - Markus Laine <markus.laine@fi.rohmeurope.com> > + - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com> > + > +description: | > + The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion > + secondary battery intended to be used in space-constraint equipment such > + as Low profile Notebook PC, Tablets and other applications. BD99954 > + provides a Dual-source Battery Charger, two port BC1.2 detection and a > + Battery Monitor. > + > + > +properties: > + compatible: > + const: rohm,bd99954 > +# > +# The battery charging profile of BD99954. > +# > +# Curve (1) represents charging current. > +# Curve (2) represents battery voltage. > +# > +# The BD99954 data sheet divides charging to three phases. > +# a) Trickle-charge with constant current (8). > +# b) pre-charge with constant current (6) > +# c) fast-charge with: > +# First a constant current (5) phase (CC) > +# Then constant voltage (CV) phase (after the battery voltage has reached > +# target level - until charging current has dropped to termination > +# level (7) > +# > +# V ^ ^ I > +# . . > +# . . > +# (4)- -.- - - - - - - - - - - - - - +++++++++++++++++++++++++++. > +# . / . > +# . ++++++/++ - - - - - - - - - - - - -.- - (5) > +# . + / + . > +# . + - -- . > +# . + - + . > +# . +.- -: . > +# . .+ +` . > +# . .- + | `/ . > +# . .." + .: . > +# . -" + -- . > +# . (2) ..." + | :- . > +# . ..."" + -: . > +# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6) > +# . + `:. . > +# . + | -: . > +# . + -: . > +# . + .. . > +# . (1) + | "+++- - - -.- - (7) > +# -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8) > +# . + - > +# -------------------------------------------------+++++++++--> > +# | | | CC | CV | > +# | --trickle-- | -pre- | ---------fast----------- | > +# > +# The charger uses the following battery properties > +# - trickle-charge-current-microamp: > +# Current used at trickle-charge phase (8 in above chart) > +# minimum: 64000 > +# maximum: 1024000 > +# multipleOf: 64000 > +# - precharge-current-microamp: > +# Current used at pre-charge phase (6 in above chart) > +# minimum: 64000 > +# maximum: 1024000 > +# multipleOf: 64000 > +# - constant-charge-current-max-microamp > +# Current used at fast charge constant current phase (5 in above chart) > +# minimum: 64000 > +# maximum: 1024000 > +# multipleOf: 64000 > +# - constant-charge-voltage-max-microvolt > +# The constant voltage used in fast charging phase (4 in above chart) > +# minimum: 2560000 > +# maximum: 19200000 > +# multipleOf: 16000 > +# - precharge-upper-limit-microvolt > +# charging mode is changed from trickle charging to pre-charging > +# when battery voltage exceeds this limit voltage (3 in above chart) > +# minimum: 2048000 > +# maximum: 19200000 > +# multipleOf: 64000 > +# - re-charge-voltage-microvolt > +# minimum: 2560000 > +# maximum: 19200000 > +# multipleOf: 16000 > +# re-charging is automatically started when battry has been discharging > +# to the point where the battery voltage drops below this limit > +# - over-voltage-threshold-microvolt > +# battery is expected to be faulty if battery voltage exceeds this limit. > +# Charger will then enter to a "battery faulty" -state > +# minimum: 2560000 > +# maximum: 19200000 > +# multipleOf: 16000 > +# - charge-term-current-microamp > +# minimum: 0 > +# maximum: 1024000 > +# multipleOf: 64000 > +# a charge cycle terminates when the battery voltage is above recharge > +# threshold, and the current is below this setting (7 in above chart) > +# See also Documentation/devicetree/bindings/power/supply/battery.txt > + > + monitored-battery: > + description: > + phandle of battery characteristics devicetree node > + > + rohm,vsys-regulation-microvolt: > + description: system specific lower limit for system voltage. > + minimum: 2560000 > + maximum: 19200000 > + multipleOf: 64000 > + > + rohm,vbus-input-current-limit-microamp: > + description: system specific VBUS input current limit (in microamps). > + minimum: 32000 > + maximum: 16352000 > + multipleOf: 32000 > + > + rohm,vcc-input-current-limit-microamp: > + description: system specific VCC/VACP input current limit (in microamps). > + minimum: 32000 > + maximum: 16352000 > + multipleOf: 32000 > + > +required: > + - compatible > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + charger@9 { > + compatible = "rohm,bd99954"; > + monitored-battery = <&battery>; > + reg = <0x9>; > + interrupt-parent = <&gpio1>; > + interrupts = <29 8>; > + rohm,vsys-regulation-microvolt = <8960000>; > + rohm,vbus-input-current-limit-microamp = <1472000>; > + rohm,vcc-input-current-limit-microamp = <1472000>; > + }; > + }; > -- > 2.21.0 > > > -- > Matti Vaittinen, Linux device drivers > ROHM Semiconductors, Finland SWDC > Kiviharjunlenkki 1E > 90220 OULU > FINLAND > > ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ > Simon says - in Latin please. > ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ > Thanks to Simon Glass for the translation =]
diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml new file mode 100644 index 000000000000..7e0f73a898c7 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/rohm,bd99954.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD99954 Battery charger + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + - Markus Laine <markus.laine@fi.rohmeurope.com> + - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com> + +description: | + The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion + secondary battery intended to be used in space-constraint equipment such + as Low profile Notebook PC, Tablets and other applications. BD99954 + provides a Dual-source Battery Charger, two port BC1.2 detection and a + Battery Monitor. + + +properties: + compatible: + const: rohm,bd99954 +# +# The battery charging profile of BD99954. +# +# Curve (1) represents charging current. +# Curve (2) represents battery voltage. +# +# The BD99954 data sheet divides charging to three phases. +# a) Trickle-charge with constant current (8). +# b) pre-charge with constant current (6) +# c) fast-charge with: +# First a constant current (5) phase (CC) +# Then constant voltage (CV) phase (after the battery voltage has reached +# target level - until charging current has dropped to termination +# level (7) +# +# V ^ ^ I +# . . +# . . +# (4)- -.- - - - - - - - - - - - - - +++++++++++++++++++++++++++. +# . / . +# . ++++++/++ - - - - - - - - - - - - -.- - (5) +# . + / + . +# . + - -- . +# . + - + . +# . +.- -: . +# . .+ +` . +# . .- + | `/ . +# . .." + .: . +# . -" + -- . +# . (2) ..." + | :- . +# . ..."" + -: . +# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6) +# . + `:. . +# . + | -: . +# . + -: . +# . + .. . +# . (1) + | "+++- - - -.- - (7) +# -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8) +# . + - +# -------------------------------------------------+++++++++--> +# | | | CC | CV | +# | --trickle-- | -pre- | ---------fast----------- | +# +# The charger uses the following battery properties +# - trickle-charge-current-microamp: +# Current used at trickle-charge phase (8 in above chart) +# minimum: 64000 +# maximum: 1024000 +# multipleOf: 64000 +# - precharge-current-microamp: +# Current used at pre-charge phase (6 in above chart) +# minimum: 64000 +# maximum: 1024000 +# multipleOf: 64000 +# - constant-charge-current-max-microamp +# Current used at fast charge constant current phase (5 in above chart) +# minimum: 64000 +# maximum: 1024000 +# multipleOf: 64000 +# - constant-charge-voltage-max-microvolt +# The constant voltage used in fast charging phase (4 in above chart) +# minimum: 2560000 +# maximum: 19200000 +# multipleOf: 16000 +# - precharge-upper-limit-microvolt +# charging mode is changed from trickle charging to pre-charging +# when battery voltage exceeds this limit voltage (3 in above chart) +# minimum: 2048000 +# maximum: 19200000 +# multipleOf: 64000 +# - re-charge-voltage-microvolt +# minimum: 2560000 +# maximum: 19200000 +# multipleOf: 16000 +# re-charging is automatically started when battry has been discharging +# to the point where the battery voltage drops below this limit +# - over-voltage-threshold-microvolt +# battery is expected to be faulty if battery voltage exceeds this limit. +# Charger will then enter to a "battery faulty" -state +# minimum: 2560000 +# maximum: 19200000 +# multipleOf: 16000 +# - charge-term-current-microamp +# minimum: 0 +# maximum: 1024000 +# multipleOf: 64000 +# a charge cycle terminates when the battery voltage is above recharge +# threshold, and the current is below this setting (7 in above chart) +# See also Documentation/devicetree/bindings/power/supply/battery.txt + + monitored-battery: + description: + phandle of battery characteristics devicetree node + + rohm,vsys-regulation-microvolt: + description: system specific lower limit for system voltage. + minimum: 2560000 + maximum: 19200000 + multipleOf: 64000 + + rohm,vbus-input-current-limit-microamp: + description: system specific VBUS input current limit (in microamps). + minimum: 32000 + maximum: 16352000 + multipleOf: 32000 + + rohm,vcc-input-current-limit-microamp: + description: system specific VCC/VACP input current limit (in microamps). + minimum: 32000 + maximum: 16352000 + multipleOf: 32000 + +required: + - compatible + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + charger@9 { + compatible = "rohm,bd99954"; + monitored-battery = <&battery>; + reg = <0x9>; + interrupt-parent = <&gpio1>; + interrupts = <29 8>; + rohm,vsys-regulation-microvolt = <8960000>; + rohm,vbus-input-current-limit-microamp = <1472000>; + rohm,vcc-input-current-limit-microamp = <1472000>; + }; + };