@@ -68,10 +68,6 @@
#define RTL_SUPPORTS_5000FULL BIT(14)
#define RTL_SUPPORTS_2500FULL BIT(13)
#define RTL_SUPPORTS_10000FULL BIT(0)
-#define RTL_ADV_2500FULL BIT(7)
-#define RTL_LPADV_10000FULL BIT(11)
-#define RTL_LPADV_5000FULL BIT(6)
-#define RTL_LPADV_2500FULL BIT(5)
#define RTL9000A_GINMR 0x14
#define RTL9000A_GINMR_LINK_STATUS BIT(4)
@@ -669,14 +665,11 @@ static int rtl822x_config_aneg(struct phy_device *phydev)
int val, ret = 0;
if (phydev->autoneg == AUTONEG_ENABLE) {
- u16 adv2500 = 0;
-
- if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
- phydev->advertising))
- adv2500 = RTL_ADV_2500FULL;
-
ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12,
- RTL_ADV_2500FULL, adv2500);
+ MDIO_AN_10GBT_CTRL_ADV10G |
+ MDIO_AN_10GBT_CTRL_ADV5G |
+ MDIO_AN_10GBT_CTRL_ADV2_5G,
+ linkmode_adv_to_mii_10gbt_adv_t(phydev->advertising));
if (ret < 0)
return ret;
}
@@ -722,12 +715,7 @@ static int rtl822x_read_status(struct phy_device *phydev)
if (lpadv < 0)
return lpadv;
- linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
- phydev->lp_advertising, lpadv & RTL_LPADV_10000FULL);
- linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
- phydev->lp_advertising, lpadv & RTL_LPADV_5000FULL);
- linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
- phydev->lp_advertising, lpadv & RTL_LPADV_2500FULL);
+ mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, lpadv);
}
ret = rtlgen_read_status(phydev);
Use existing generic inline functions to encode local advertisement of 10GbE link modes as well as to decode link-partner advertisement. Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- drivers/net/phy/realtek.c | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-)