mbox series

[v2,0/2] irqchip: add support for BCM6345 interrupt controller

Message ID 20210223204340.312-1-noltari@gmail.com (mailing list archive)
Headers show
Series irqchip: add support for BCM6345 interrupt controller | expand

Message

Álvaro Fernández Rojas Feb. 23, 2021, 8:43 p.m. UTC 
This interrupt controller is present on bcm63xx SoCs in order to generate
interrupts based on GPIO status changes.

v2: fix documentation title typo.

Álvaro Fernández Rojas (2):
  dt-bindings: interrupt-controller: document BCM6345 external interrupt
    controller
  irqchip: add support for BCM6345 interrupt controller

 .../brcm,bcm6345-ext-intc.yaml                |  61 ++++
 drivers/irqchip/Kconfig                       |   4 +
 drivers/irqchip/Makefile                      |   1 +
 drivers/irqchip/irq-bcm6345-ext.c             | 271 ++++++++++++++++++
 4 files changed, 337 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.yaml
 create mode 100644 drivers/irqchip/irq-bcm6345-ext.c

Comments

Álvaro Fernández Rojas Feb. 24, 2021, 7:56 a.m. UTC | #1 
This interrupt controller is present on bcm63xx SoCs in order to generate
interrupts based on GPIO status changes.

v3: pass dt_binding_check.
v2: fix documentation title typo.

Álvaro Fernández Rojas (2):
  dt-bindings: interrupt-controller: document BCM6345 external interrupt
    controller
  irqchip: add support for BCM6345 external interrupt controller

 .../brcm,bcm6345-ext-intc.yaml                |  78 +++++
 drivers/irqchip/Kconfig                       |   4 +
 drivers/irqchip/Makefile                      |   1 +
 drivers/irqchip/irq-bcm6345-ext.c             | 271 ++++++++++++++++++
 4 files changed, 354 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.yaml
 create mode 100644 drivers/irqchip/irq-bcm6345-ext.c
Álvaro Fernández Rojas Feb. 24, 2021, 7:58 a.m. UTC | #2 
This is supposed to be v3…
Sorry for that. Should I resend?

> El 24 feb 2021, a las 8:56, Álvaro Fernández Rojas <noltari@gmail.com> escribió:
> 
> This interrupt controller is present on bcm63xx SoCs in order to generate
> interrupts based on GPIO status changes.
> 
> v3: pass dt_binding_check.
> v2: fix documentation title typo.
> 
> Álvaro Fernández Rojas (2):
>  dt-bindings: interrupt-controller: document BCM6345 external interrupt
>    controller
>  irqchip: add support for BCM6345 external interrupt controller
> 
> .../brcm,bcm6345-ext-intc.yaml                |  78 +++++
> drivers/irqchip/Kconfig                       |   4 +
> drivers/irqchip/Makefile                      |   1 +
> drivers/irqchip/irq-bcm6345-ext.c             | 271 ++++++++++++++++++
> 4 files changed, 354 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.yaml
> create mode 100644 drivers/irqchip/irq-bcm6345-ext.c
> 
> -- 
> 2.20.1
>
Marc Zyngier Feb. 24, 2021, 10:03 a.m. UTC | #3 
On Wed, 24 Feb 2021 07:58:44 +0000,
Álvaro Fernández Rojas <noltari@gmail.com> wrote:
> 
> This is supposed to be v3…
> Sorry for that. Should I resend?

No, please. 3 versions in less than 12 hours in the middle of a merge
window is bad enough.

Thanks,

	M.
Álvaro Fernández Rojas Feb. 27, 2021, 6:49 a.m. UTC | #4 
Hi all,

Apparently these patches were flagged as “Not Applicable” without an explanation. Why?
https://patchwork.kernel.org/project/linux-mips/patch/20210224075640.20465-2-noltari@gmail.com/
https://patchwork.kernel.org/project/linux-mips/patch/20210224075640.20465-3-noltari@gmail.com/

Best regards,
Álvaro.

> El 24 feb 2021, a las 8:56, Álvaro Fernández Rojas <noltari@gmail.com> escribió:
> 
> This interrupt controller is present on bcm63xx SoCs in order to generate
> interrupts based on GPIO status changes.
> 
> v3: pass dt_binding_check.
> v2: fix documentation title typo.
> 
> Álvaro Fernández Rojas (2):
>  dt-bindings: interrupt-controller: document BCM6345 external interrupt
>    controller
>  irqchip: add support for BCM6345 external interrupt controller
> 
> .../brcm,bcm6345-ext-intc.yaml                |  78 +++++
> drivers/irqchip/Kconfig                       |   4 +
> drivers/irqchip/Makefile                      |   1 +
> drivers/irqchip/irq-bcm6345-ext.c             | 271 ++++++++++++++++++
> 4 files changed, 354 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.yaml
> create mode 100644 drivers/irqchip/irq-bcm6345-ext.c
> 
> -- 
> 2.20.1
>
Rob Herring (Arm) March 6, 2021, 8:11 p.m. UTC | #5 
On Sat, Feb 27, 2021 at 07:49:09AM +0100, Álvaro Fernández Rojas wrote:
> Hi all,
> 
> Apparently these patches were flagged as “Not Applicable” without an explanation. Why?
> https://patchwork.kernel.org/project/linux-mips/patch/20210224075640.20465-2-noltari@gmail.com/
> https://patchwork.kernel.org/project/linux-mips/patch/20210224075640.20465-3-noltari@gmail.com/

They aren't applied by the MIPS maintainers would be my guess.