| Message ID | 20210307141759.30426-1-paul@crapouillou.net (mailing list archive) |
|---|---|
| Headers | show |
| Series | clk: Ingenic JZ4760(B) support | expand |
Hi Paul, On 2021/3/7 下午10:17, Paul Cercueil wrote: > Hi, > > Here are a set of patches to add support for the Ingenic JZ4760(B) SoCs. > > One thing to note is that the ingenic,jz4760-tcu is undocumented for now, > as I will update the TCU documentation in a different patchset. > > Zhou: the CGU code now supports overriding the PLL M/N/OD calc > algorithm, please tell me if it works for you. After set "od = 1;", the overriding works, but I think we still need some further improvements related to OD, because there is no OD bits in the I2S PLL, this will cause error in "ingenic_pll_recalc_rate()", and may cause "ingenic_pll_calc()" to also have error(if we will introduce support for non 1 od values). I think maybe we can add codes to detect if there is an "pll_od_encoding". If it is NULL, it means no OD bits, then do some corresponding processing( for example, setting corresponding variable to 1) to ensure proper calculation. Thanks and best regards! > Cheers, > -Paul > > Paul Cercueil (6): > dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles > clk: Support bypassing dividers > clk: ingenic: Read bypass register only when there is one > clk: ingenic: Remove pll_info.no_bypass_bit > clk: ingenic: Support overriding PLLs M/N/OD calc algorithm > clk: ingenic: Add support for the JZ4760 > > .../bindings/clock/ingenic,cgu.yaml | 4 + > drivers/clk/ingenic/Kconfig | 10 + > drivers/clk/ingenic/Makefile | 1 + > drivers/clk/ingenic/cgu.c | 92 ++-- > drivers/clk/ingenic/cgu.h | 12 +- > drivers/clk/ingenic/jz4725b-cgu.c | 12 +- > drivers/clk/ingenic/jz4740-cgu.c | 12 +- > drivers/clk/ingenic/jz4760-cgu.c | 433 ++++++++++++++++++ > drivers/clk/ingenic/jz4770-cgu.c | 15 +- > drivers/clk/ingenic/tcu.c | 2 + > include/dt-bindings/clock/jz4760-cgu.h | 54 +++ > 11 files changed, 591 insertions(+), 56 deletions(-) > create mode 100644 drivers/clk/ingenic/jz4760-cgu.c > create mode 100644 include/dt-bindings/clock/jz4760-cgu.h >
Hi Paul, On 2021/3/7 下午10:17, Paul Cercueil wrote: > Hi, > > Here are a set of patches to add support for the Ingenic JZ4760(B) SoCs. > > One thing to note is that the ingenic,jz4760-tcu is undocumented for now, > as I will update the TCU documentation in a different patchset. > > Zhou: the CGU code now supports overriding the PLL M/N/OD calc > algorithm, please tell me if it works for you. Newly found two problems, the first problem is because I2S PLL does not have a stable bit, so we need to follow the bypass bit, which is only do corresponding processing when "stable_bit > = 0". The second problem is that the I2S PLL cannot switch the parent clock after using the PLL framework, so it cannot use SCLKA and MPLL as the parent clock (when trying to switch the parent clock, it will stuck and accompany "clk: failed to reparent i2s to mpll: -22"). > > Cheers, > -Paul > > Paul Cercueil (6): > dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles > clk: Support bypassing dividers > clk: ingenic: Read bypass register only when there is one > clk: ingenic: Remove pll_info.no_bypass_bit > clk: ingenic: Support overriding PLLs M/N/OD calc algorithm > clk: ingenic: Add support for the JZ4760 > > .../bindings/clock/ingenic,cgu.yaml | 4 + > drivers/clk/ingenic/Kconfig | 10 + > drivers/clk/ingenic/Makefile | 1 + > drivers/clk/ingenic/cgu.c | 92 ++-- > drivers/clk/ingenic/cgu.h | 12 +- > drivers/clk/ingenic/jz4725b-cgu.c | 12 +- > drivers/clk/ingenic/jz4740-cgu.c | 12 +- > drivers/clk/ingenic/jz4760-cgu.c | 433 ++++++++++++++++++ > drivers/clk/ingenic/jz4770-cgu.c | 15 +- > drivers/clk/ingenic/tcu.c | 2 + > include/dt-bindings/clock/jz4760-cgu.h | 54 +++ > 11 files changed, 591 insertions(+), 56 deletions(-) > create mode 100644 drivers/clk/ingenic/jz4760-cgu.c > create mode 100644 include/dt-bindings/clock/jz4760-cgu.h >
Hi Paul, On 2021/3/7 下午10:17, Paul Cercueil wrote: > Hi, > > Here are a set of patches to add support for the Ingenic JZ4760(B) SoCs. > > One thing to note is that the ingenic,jz4760-tcu is undocumented for now, > as I will update the TCU documentation in a different patchset. > > Zhou: the CGU code now supports overriding the PLL M/N/OD calc > algorithm, please tell me if it works for you. The previously mentioned problems have all been solved, this proves that your patch is available for I2S PLL. I will improve and clean up the relevant code, then send it immediately after your patches is merged. Thanks and best regards! > Cheers, > -Paul > > Paul Cercueil (6): > dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles > clk: Support bypassing dividers > clk: ingenic: Read bypass register only when there is one > clk: ingenic: Remove pll_info.no_bypass_bit > clk: ingenic: Support overriding PLLs M/N/OD calc algorithm > clk: ingenic: Add support for the JZ4760 > > .../bindings/clock/ingenic,cgu.yaml | 4 + > drivers/clk/ingenic/Kconfig | 10 + > drivers/clk/ingenic/Makefile | 1 + > drivers/clk/ingenic/cgu.c | 92 ++-- > drivers/clk/ingenic/cgu.h | 12 +- > drivers/clk/ingenic/jz4725b-cgu.c | 12 +- > drivers/clk/ingenic/jz4740-cgu.c | 12 +- > drivers/clk/ingenic/jz4760-cgu.c | 433 ++++++++++++++++++ > drivers/clk/ingenic/jz4770-cgu.c | 15 +- > drivers/clk/ingenic/tcu.c | 2 + > include/dt-bindings/clock/jz4760-cgu.h | 54 +++ > 11 files changed, 591 insertions(+), 56 deletions(-) > create mode 100644 drivers/clk/ingenic/jz4760-cgu.c > create mode 100644 include/dt-bindings/clock/jz4760-cgu.h >
Hi, Here are a set of patches to add support for the Ingenic JZ4760(B) SoCs. One thing to note is that the ingenic,jz4760-tcu is undocumented for now, as I will update the TCU documentation in a different patchset. Zhou: the CGU code now supports overriding the PLL M/N/OD calc algorithm, please tell me if it works for you. Cheers, -Paul Paul Cercueil (6): dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles clk: Support bypassing dividers clk: ingenic: Read bypass register only when there is one clk: ingenic: Remove pll_info.no_bypass_bit clk: ingenic: Support overriding PLLs M/N/OD calc algorithm clk: ingenic: Add support for the JZ4760 .../bindings/clock/ingenic,cgu.yaml | 4 + drivers/clk/ingenic/Kconfig | 10 + drivers/clk/ingenic/Makefile | 1 + drivers/clk/ingenic/cgu.c | 92 ++-- drivers/clk/ingenic/cgu.h | 12 +- drivers/clk/ingenic/jz4725b-cgu.c | 12 +- drivers/clk/ingenic/jz4740-cgu.c | 12 +- drivers/clk/ingenic/jz4760-cgu.c | 433 ++++++++++++++++++ drivers/clk/ingenic/jz4770-cgu.c | 15 +- drivers/clk/ingenic/tcu.c | 2 + include/dt-bindings/clock/jz4760-cgu.h | 54 +++ 11 files changed, 591 insertions(+), 56 deletions(-) create mode 100644 drivers/clk/ingenic/jz4760-cgu.c create mode 100644 include/dt-bindings/clock/jz4760-cgu.h