From patchwork Mon Feb 12 13:44:31 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Th=C3=A9o_Lebrun?= X-Patchwork-Id: 13553203 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 184A83D54C; Mon, 12 Feb 2024 13:44:35 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.199 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1707745479; cv=none; b=UfI02ibDlEZ1qOonwhLVN5z1Uyumjp+SAbgY4QHlVU8h0zfmcBxu0MR2rAJCia4cdT4OLpoQPKqCfy1EZVWnlmA5ChCfUOlWJcIqSxhArDKTR27fcbsENEUko/O0pDuutip8Bh13YNjDucdO38KCwk8kTONQhYr82NcAAHDimGs= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1707745479; c=relaxed/simple; bh=HzBkXRWHw2jlv/7jyejhECz3JcmKua6KfKfsp9G1iSY=; h=From:Subject:Date:Message-Id:MIME-Version:Content-Type:To:Cc; b=WARr2Ji9cITZqxzrcT3pimvnCA8je9msuMAkzeDKJYpF+2zt9cjOxcTW48f7hrUvj0R2wX0+ywQBJpTMIqUNOBR6EYJePzSk7i9qdTZR43qxZdkrpf2R8c4MtnhiN9i1tXrZgVCvHASpzWG+h7IBk7qbkWMuFJxYcwWpizAgrao= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=RVKrwa2k; arc=none smtp.client-ip=217.70.183.199 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="RVKrwa2k" Received: by mail.gandi.net (Postfix) with ESMTPSA id 21EB0FF807; Mon, 12 Feb 2024 13:44:33 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1707745474; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding; bh=3LR/iRsthMQwI5kZqt1MBMvWucAmDB7IZnKA4trslL0=; b=RVKrwa2k1fbaLYzDPN5qX0wDz93nmxN99JLufGyUEDMC3A1Rd1NoE3jTz5FUkgRbh13f2b 1Pp1OxlB4yatVTBg8YGj0iJB/iWc7xULYUou2pFfzUkFN9n3LX314U7DYc9R06l54gN+lM 8zZIKI/CxFLr8qEMYgkn5BLc94E+ss/tEQbXztlPpNGnRqDBUbSxeLoVR6zRWUCUeGr5qM OUW5tQ4PBmoyWl6Cc+oTqxnLBB9VdbCZj8qJHCLYvR1SF9PHqSM+3ugZ0s2BTWYUXGvVkg zVGsetUT2hFXD0KFOLEaQ3hP/0pp/KPma3WkEHJReUwbqGO6LxqDFP8kS/fy4w== From: =?utf-8?q?Th=C3=A9o_Lebrun?= Subject: [PATCH v6 00/13] Add support for Mobileye EyeQ5 system controller Date: Mon, 12 Feb 2024 14:44:31 +0100 Message-Id: <20240212-mbly-clk-v6-0-c46fa1f93839@bootlin.com> Precedence: bulk X-Mailing-List: linux-mips@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-B4-Tracking: v=1; b=H4sIAMAgymUC/3XQzU7DMAwH8FeZcibIdj6a7MR7oB2a1GERW4vaq WKa+u6kQ6gdhUMOjvL7x/ZNDNxnHsR+dxM9j3nIXVsK+7QT8Vi3byxzU2pBQArLkedwusp4epe uimwiaUzgRHn+0XPKn/eo10Opj3m4dP31njzifPsdggqWkBElSGdDQvRVg4pfQtddTrl9jt15T v2HBMVgGht84PpPQuh+Ea1LvxrBJbAPZG52pKVBompFqdC6/BWsispB2lL1QzXgekGjKlR5CoA QHDncUr2iCldUzzPGBsAgNLaGLTULJfAragpN4DWzYY/ucT2HaZq+ACoxkP/0AQAA To: Gregory CLEMENT , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Thomas Bogendoerfer , Linus Walleij , =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= , Philipp Zabel Cc: Vladimir Kondratiev , linux-mips@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Thomas Petazzoni , Tawfik Bayouk , linux-gpio@vger.kernel.org, =?utf-8?q?Th=C3=A9o_Lebrun?= , Krzysztof Kozlowski , Rob Herring X-Mailer: b4 0.12.4 X-GND-Sasl: theo.lebrun@bootlin.com Hi, The goal of this series is to add clk, reset and pinctrl support for the Mobileye EyeQ5 platform [0]. Control of those is grouped inside a system controller block called "OLB". About clocks, we replaced the 10 fixed clocks from the initial platform support series [0] by 10 read-only fixed-factor PLLs provided by our clock driver. We also provide one table-based divider clock for OSPI. Two PLLs (for GIC timer & UARTs) are required at of_clk_init() so those are registered first, the rest comes at platform device probe. Resets are split in three domains, all dealt with by the same device. They have some behavior differences: - We busy-wait on the first two for hardware LBIST reasons (logic built-in self-test). - Domains 0 & 2 work in a bit-per-reset fashion while domain 1 works in a register-per-reset fashion. Pin control is about controlling bias, drive strength and muxing. The latter allows two functions per pin; the first function is always GPIO while the second one is pin-dependent. There exists two banks, both handled by a single driver instance. Each pin maps to one pin group. That makes pin & group indexes the same, simplifying logic. The patch adding the system-controller dt-bindings ("dt-bindings: soc: mobileye: add EyeQ5 OLB system controller") is dependent on the three controllers dt-bindings: - dt-bindings: clock: mobileye,eyeq5-clk: add bindings - dt-bindings: reset: mobileye,eyeq5-reset: add bindings - dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings The parent is v6.8-rc4 with the "[PATCH v7 00/14] Add support for the Mobileye EyeQ5 SoC" series [0] rebased on top. Here is the patch list, split by subsystems: - clk: [PATCH v5 01/13] clk: fixed-factor: add optional accuracy support [PATCH v5 02/13] clk: fixed-factor: add fwname-based constructor functions [PATCH v5 03/13] dt-bindings: clock: mobileye,eyeq5-clk: add bindings [PATCH v5 07/13] clk: eyeq5: add platform driver, and init routine at of_clk_init() - pinctrl: [PATCH v5 05/13] dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings [PATCH v5 09/13] pinctrl: eyeq5: add platform driver - reset: [PATCH v5 04/13] dt-bindings: reset: mobileye,eyeq5-reset: add bindings [PATCH v5 08/13] reset: eyeq5: add platform driver - MIPS: (note: dependent on the [0] series) [PATCH v5 06/13] dt-bindings: soc: mobileye: add EyeQ5 OLB system controller [PATCH v5 10/13] MIPS: mobileye: eyeq5: add OLB syscon node [PATCH v5 11/13] MIPS: mobileye: eyeq5: use OLB clocks controller node [PATCH v5 12/13] MIPS: mobileye: eyeq5: add OLB reset controller node [PATCH v5 13/13] MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes Thanks all for the previous feedback! Have a nice day, Théo Lebrun [0]: https://lore.kernel.org/lkml/20240205153503.574468-1-gregory.clement@bootlin.com/ Signed-off-by: Théo Lebrun --- Changes in v6: - bindings/clk: remove minItems in reg. - bindings/reset: remove minItems in reg. - bindings/syscon: unify quotes (use single quotes everywhere). - bindings: apply three Reviewed-By tags from Krzysztof. - Rebased onto v6.8-rc5. No related changes. Tested on EyeQ5 hardware. - Link to v5: https://lore.kernel.org/r/20240209-mbly-clk-v5-0-f094ee5e918a@bootlin.com Changes in v5: - pinctrl: fix pin/offset distinction, add eq5p_pin_to_offset() helper, rename eq5p_pin_offset_to_bank() to eq5p_pin_to_bank(), rename eq5p_readl_bit() to eq5p_test_bit(), remove old include, add defensive check in eq5p_test_bit(). - dt-bindings/MIPS: OLB example (dt-bindings) and devicetree: fix ordering of nodes and properties, fix register casing. - dt-bindings: add pin group node example to OLB dt-bindings. - MIPS: squashed "MIPS: mobileye: eyeq5: add reset properties to UARTs" into "MIPS: mobileye: eyeq5: add OLB reset controller node". - MIPS: squashed "MIPS: mobileye: eyeq5: add pinctrl properties to UART nodes" into "MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes". - MIPS: rebased onto V7 of [0], meaning we now introduce the OLB syscon node in DT in this series rather than modifying it. - Apply Reviewed-by from Rob onto "dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings". - dt-bindings: Drop "dt-bindings: pinctrl: allow pin controller device without unit address". - dt-bindings: I did NOT apply Krzysztof's Reviewed-By trailers from v3 as I am not sure he acked the changes made in V4. - Link to v4: https://lore.kernel.org/r/20240131-mbly-clk-v4-0-bcd00510d6a0@bootlin.com Changes in v4: - Have the three drivers access MMIO directly rather than through the syscon & regmap. - pinctrl: Make the pin controller handle both banks using a single instance. - pinctrl/dt-bindings: Add if/else for each function, to strictly define possible functions. - clk: Changing to direct MMIO means we can use clk_hw_register_divider_table_parent_hw() for the OSPI table-based divider clock. - Use builtin_platform_driver() for platform driver registering instead of manual initcalls. - reset: follow Philipp & Krzysztof's feedback: - Use container_of() to get private struct. - Use '_withlock' suffix instead of the underscore prefix. - Use udelay() instead of the non-standard __udelay(). - Remove useless checks. - Use mutex guards. - Remove the ->reset() implementation. - Use devres variants for kzalloc() and reset_controller_register(). - Other small changes following feedback from reviewers. dt-bindings whitespace for pinctrl.yaml, fix pinctrl driver dt-bindings description, improve clk driver commit header, etc. - Link to v3: https://lore.kernel.org/r/20240123-mbly-clk-v3-0-392b010b8281@bootlin.com Changes in v3: - Unified the three series into one. - clk: split driver into two for clocks registered at of_clk_init() and clocks registered at platform device probe. - reset/bindings: drop reset dt-bindings header & add comment in driver to document known valid resets in each domain. - pinctrl/bindings: fix pinctrl.yaml to allow non unit addresses for pin controller devices. - all/bindings: remove possibility to use `mobileye,olb` phandle to get syscon. All three drivers use their parent node as syscon/regmap. - MIPS/bindings: fix bindings for OLB. Have single example in parent, removing all examples in child. - all: drop the "probed" logs. - Link to v2: https://lore.kernel.org/r/20231227-mbly-clk-v2-0-a05db63c380f@bootlin.com Changes in v2: - Drop [PATCH 1/5] that was taken by Stephen for clk-next. - Add accuracy support to fixed-factor that is enabled with a flag. Register prototypes were added to exploit this feature. - Add fw_name support to fixed-factor. This allows pointing to parent clocks using the value in `clock-names` in the DT. Register prototypes were added for that. - Bindings were modified to be less dumb: a binding was added for OLB and the clock-controller is a child property of it. Removed the possibility of pointing to OLB using a phandle. $nodename is the generic `clock-controller` and not custom `clocks`. Fix dt-bindings examples. - Fix commit message for the driver patch. Add details, remove useless fluff. - Squash both driver commits together. - Declare a platform_driver instead of using CLK_OF_DECLARE_DRIVER. This also means using `dev_*` for logging, removing `pr_fmt`. We add a pointer to device in the private structure. - Use fixed-factor instead of fixed-rate for PLLs. We don't grab a reference to the parent clk, instead using newly added fixed-factor register prototypes and fwname. - NULL is not an error when registering PLLs anymore. - Now checking the return value of of_clk_add_hw_provider for errors. - Fix includes. - Remove defensive conditional at start of eq5c_pll_parse_registers. - Rename clk_hw_to_ospi_priv to clk_to_priv to avoid confusion: it is not part of the clk_hw_* family of symbols. - Fix negative returns in eq5c_ospi_div_set_rate. It was a typo highlighted by Stephen Boyd. - Declare eq5c_ospi_div_ops as static. - In devicetree, move the OLB node prior to the UARTs, as platform device probe scheduling is dependent on devicetree ordering. This is required to declare the driver as a platform driver, else it CLK_OF_DECLARE_DRIVER is required. - In device, create a core0-timer-clk fixed clock to feed to the GIC timer. It requires a clock earlier than platform bus type init. - Link to v1: https://lore.kernel.org/r/20231218-mbly-clk-v1-0-44ce54108f06@bootlin.com --- Théo Lebrun (13): clk: fixed-factor: add optional accuracy support clk: fixed-factor: add fwname-based constructor functions dt-bindings: clock: mobileye,eyeq5-clk: add bindings dt-bindings: reset: mobileye,eyeq5-reset: add bindings dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings dt-bindings: soc: mobileye: add EyeQ5 OLB system controller clk: eyeq5: add platform driver, and init routine at of_clk_init() reset: eyeq5: add platform driver pinctrl: eyeq5: add platform driver MIPS: mobileye: eyeq5: add OLB syscon node MIPS: mobileye: eyeq5: use OLB clocks controller node MIPS: mobileye: eyeq5: add OLB reset controller node MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes .../bindings/clock/mobileye,eyeq5-clk.yaml | 51 ++ .../bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml | 242 +++++++++ .../bindings/reset/mobileye,eyeq5-reset.yaml | 43 ++ .../bindings/soc/mobileye/mobileye,eyeq5-olb.yaml | 94 ++++ MAINTAINERS | 8 + .../{eyeq5-fixed-clocks.dtsi => eyeq5-clocks.dtsi} | 54 +- arch/mips/boot/dts/mobileye/eyeq5-pins.dtsi | 125 +++++ arch/mips/boot/dts/mobileye/eyeq5.dtsi | 42 +- drivers/clk/Kconfig | 11 + drivers/clk/Makefile | 1 + drivers/clk/clk-eyeq5.c | 289 ++++++++++ drivers/clk/clk-fixed-factor.c | 103 +++- drivers/pinctrl/Kconfig | 15 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-eyeq5.c | 581 +++++++++++++++++++++ drivers/reset/Kconfig | 12 + drivers/reset/Makefile | 1 + drivers/reset/reset-eyeq5.c | 342 ++++++++++++ include/dt-bindings/clock/mobileye,eyeq5-clk.h | 22 + include/linux/clk-provider.h | 26 +- 20 files changed, 2007 insertions(+), 56 deletions(-) --- base-commit: fe17164b560a24c66be4a00ff8ecc14fca04aea7 change-id: 20231023-mbly-clk-87ce5c241f08 Best regards,