@@ -1378,9 +1378,11 @@ config CPU_LOONGSON3
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
+ select CPU_SUPPORTS_MSA
select CPU_HAS_LOAD_STORE_LR
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
+ select MIPS_ASID_BITS_VARIABLE
select MIPS_PGD_C0_CONTEXT
select MIPS_L1_CACHE_SHIFT_6
select GPIOLIB
@@ -91,7 +91,9 @@
#define PRID_IMP_LOONGSON_32 0x4200 /* Loongson-1 */
#define PRID_IMP_R5432 0x5400
#define PRID_IMP_R5500 0x5500
-#define PRID_IMP_LOONGSON_64 0x6300 /* Loongson-2/3 */
+#define PRID_IMP_LOONGSON_64R 0x6100 /* Reduced Loongson-2 */
+#define PRID_IMP_LOONGSON_64C 0x6300 /* Classic Loongson-2 and Loongson-3 */
+#define PRID_IMP_LOONGSON_64G 0xc000 /* Generic Loongson-2 and Loongson-3 */
#define PRID_IMP_UNKNOWN 0xff00
@@ -30,13 +30,21 @@
mtc0 t0, CP0_PAGEGRAIN
/* Enable STFill Buffer */
mfc0 t0, CP0_PRID
+ /* Loongson-3A R4+ */
+ andi t1, t0, PRID_IMP_MASK
+ li t2, PRID_IMP_LOONGSON_64G
+ beq t1, t2, 1f
+ nop
+ /* Loongson-3A R2/R3 */
andi t0, (PRID_IMP_MASK | PRID_REV_MASK)
- slti t0, (PRID_IMP_LOONGSON_64 | PRID_REV_LOONGSON3A_R2_0)
- bnez t0, 1f
+ slti t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
+ bnez t0, 2f
+ nop
+1:
mfc0 t0, CP0_CONFIG6
or t0, 0x100
mtc0 t0, CP0_CONFIG6
-1:
+2:
_ehb
.set pop
#endif
@@ -59,13 +67,21 @@
mtc0 t0, CP0_PAGEGRAIN
/* Enable STFill Buffer */
mfc0 t0, CP0_PRID
+ /* Loongson-3A R4+ */
+ andi t1, t0, PRID_IMP_MASK
+ li t2, PRID_IMP_LOONGSON_64G
+ beq t1, t2, 1f
+ nop
+ /* Loongson-3A R2/R3 */
andi t0, (PRID_IMP_MASK | PRID_REV_MASK)
- slti t0, (PRID_IMP_LOONGSON_64 | PRID_REV_LOONGSON3A_R2_0)
- bnez t0, 1f
+ slti t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
+ bnez t0, 2f
+ nop
+1:
mfc0 t0, CP0_CONFIG6
or t0, 0x100
mtc0 t0, CP0_CONFIG6
-1:
+2:
_ehb
.set pop
#endif
@@ -1526,7 +1526,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
MIPS_CPU_LLSC | MIPS_CPU_BP_GHIST;
c->tlbsize = 64;
break;
- case PRID_IMP_LOONGSON_64: /* Loongson-2/3 */
+ case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */
switch (c->processor_id & PRID_REV_MASK) {
case PRID_REV_LOONGSON2E:
c->cputype = CPU_LOONGSON2;
@@ -1565,6 +1565,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
MIPS_CPU_FPU | MIPS_CPU_LLSC |
MIPS_CPU_32FPR;
c->tlbsize = 64;
+ set_cpu_asid_mask(c, MIPS_ENTRYHI_ASID);
c->writecombine = _CACHE_UNCACHED_ACCELERATED;
break;
case PRID_IMP_LOONGSON_32: /* Loongson-1 */
@@ -1903,7 +1904,7 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
{
switch (c->processor_id & PRID_IMP_MASK) {
- case PRID_IMP_LOONGSON_64: /* Loongson-2/3 */
+ case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */
switch (c->processor_id & PRID_REV_MASK) {
case PRID_REV_LOONGSON3A_R2_0:
case PRID_REV_LOONGSON3A_R2_1:
@@ -1927,6 +1928,17 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2);
break;
+ case PRID_IMP_LOONGSON_64G:
+ c->cputype = CPU_LOONGSON3;
+ __cpu_name[cpu] = "ICT Loongson-3";
+ set_elf_platform(cpu, "loongson3a");
+ set_isa(c, MIPS_CPU_ISA_M64R2);
+ decode_configs(c);
+ c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE;
+ c->writecombine = _CACHE_UNCACHED_ACCELERATED;
+ c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
+ MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2);
+ break;
default:
panic("Unknown Loongson Processor ID!");
break;
@@ -179,7 +179,8 @@ void __init check_wait(void)
cpu_wait = r4k_wait;
break;
case CPU_LOONGSON3:
- if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON3A_R2_0)
+ if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >=
+ (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0))
cpu_wait = r4k_wait;
break;
@@ -450,7 +450,7 @@ static void loongson3_cpu_die(unsigned int cpu)
* flush all L1 entries at first. Then, another core (usually Core 0) can
* safely disable the clock of the target core. loongson3_play_dead() is
* called via CKSEG1 (uncached and unmmaped) */
-static void loongson3a_r1_play_dead(int *state_addr)
+static void loongson3_type1_play_dead(int *state_addr)
{
register int val;
register long cpuid, core, node, count;
@@ -512,7 +512,7 @@ static void loongson3a_r1_play_dead(int *state_addr)
: "a1");
}
-static void loongson3a_r2r3_play_dead(int *state_addr)
+static void loongson3_type2_play_dead(int *state_addr)
{
register int val;
register long cpuid, core, node, count;
@@ -532,27 +532,7 @@ static void loongson3a_r2r3_play_dead(int *state_addr)
" cache 1, 3(%[addr]) \n"
" addiu %[sets], %[sets], -1 \n"
" bnez %[sets], 1b \n"
- " addiu %[addr], %[addr], 0x40 \n"
- " li %[addr], 0x80000000 \n" /* KSEG0 */
- "2: cache 2, 0(%[addr]) \n" /* flush L1 VCache */
- " cache 2, 1(%[addr]) \n"
- " cache 2, 2(%[addr]) \n"
- " cache 2, 3(%[addr]) \n"
- " cache 2, 4(%[addr]) \n"
- " cache 2, 5(%[addr]) \n"
- " cache 2, 6(%[addr]) \n"
- " cache 2, 7(%[addr]) \n"
- " cache 2, 8(%[addr]) \n"
- " cache 2, 9(%[addr]) \n"
- " cache 2, 10(%[addr]) \n"
- " cache 2, 11(%[addr]) \n"
- " cache 2, 12(%[addr]) \n"
- " cache 2, 13(%[addr]) \n"
- " cache 2, 14(%[addr]) \n"
- " cache 2, 15(%[addr]) \n"
- " addiu %[vsets], %[vsets], -1 \n"
- " bnez %[vsets], 2b \n"
- " addiu %[addr], %[addr], 0x40 \n"
+ " addiu %[addr], %[addr], 0x20 \n"
" li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */
" sw %[val], (%[state_addr]) \n"
" sync \n"
@@ -560,8 +540,7 @@ static void loongson3a_r2r3_play_dead(int *state_addr)
" .set pop \n"
: [addr] "=&r" (addr), [val] "=&r" (val)
: [state_addr] "r" (state_addr),
- [sets] "r" (cpu_data[smp_processor_id()].dcache.sets),
- [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets));
+ [sets] "r" (cpu_data[smp_processor_id()].dcache.sets));
__asm__ __volatile__(
" .set push \n"
@@ -576,6 +555,8 @@ static void loongson3a_r2r3_play_dead(int *state_addr)
" andi %[node], %[cpuid], 0xc \n"
" dsll %[node], 42 \n" /* get node id */
" or %[base], %[base], %[node] \n"
+ " dsrl %[node], 30 \n" /* 15:14 */
+ " or %[base], %[base], %[node] \n"
"1: li %[count], 0x100 \n" /* wait for init loop */
"2: bnez %[count], 2b \n" /* limit mailbox access */
" addiu %[count], -1 \n"
@@ -595,7 +576,7 @@ static void loongson3a_r2r3_play_dead(int *state_addr)
: "a1");
}
-static void loongson3b_play_dead(int *state_addr)
+static void loongson3_type3_play_dead(int *state_addr)
{
register int val;
register long cpuid, core, node, count;
@@ -615,7 +596,27 @@ static void loongson3b_play_dead(int *state_addr)
" cache 1, 3(%[addr]) \n"
" addiu %[sets], %[sets], -1 \n"
" bnez %[sets], 1b \n"
- " addiu %[addr], %[addr], 0x20 \n"
+ " addiu %[addr], %[addr], 0x40 \n"
+ " li %[addr], 0x80000000 \n" /* KSEG0 */
+ "2: cache 2, 0(%[addr]) \n" /* flush L1 VCache */
+ " cache 2, 1(%[addr]) \n"
+ " cache 2, 2(%[addr]) \n"
+ " cache 2, 3(%[addr]) \n"
+ " cache 2, 4(%[addr]) \n"
+ " cache 2, 5(%[addr]) \n"
+ " cache 2, 6(%[addr]) \n"
+ " cache 2, 7(%[addr]) \n"
+ " cache 2, 8(%[addr]) \n"
+ " cache 2, 9(%[addr]) \n"
+ " cache 2, 10(%[addr]) \n"
+ " cache 2, 11(%[addr]) \n"
+ " cache 2, 12(%[addr]) \n"
+ " cache 2, 13(%[addr]) \n"
+ " cache 2, 14(%[addr]) \n"
+ " cache 2, 15(%[addr]) \n"
+ " addiu %[vsets], %[vsets], -1 \n"
+ " bnez %[vsets], 2b \n"
+ " addiu %[addr], %[addr], 0x40 \n"
" li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */
" sw %[val], (%[state_addr]) \n"
" sync \n"
@@ -623,7 +624,8 @@ static void loongson3b_play_dead(int *state_addr)
" .set pop \n"
: [addr] "=&r" (addr), [val] "=&r" (val)
: [state_addr] "r" (state_addr),
- [sets] "r" (cpu_data[smp_processor_id()].dcache.sets));
+ [sets] "r" (cpu_data[smp_processor_id()].dcache.sets),
+ [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets));
__asm__ __volatile__(
" .set push \n"
@@ -638,8 +640,6 @@ static void loongson3b_play_dead(int *state_addr)
" andi %[node], %[cpuid], 0xc \n"
" dsll %[node], 42 \n" /* get node id */
" or %[base], %[base], %[node] \n"
- " dsrl %[node], 30 \n" /* 15:14 */
- " or %[base], %[base], %[node] \n"
"1: li %[count], 0x100 \n" /* wait for init loop */
"2: bnez %[count], 2b \n" /* limit mailbox access */
" addiu %[count], -1 \n"
@@ -661,30 +661,42 @@ static void loongson3b_play_dead(int *state_addr)
void play_dead(void)
{
- int *state_addr;
+ int prid_imp, prid_rev, *state_addr;
unsigned int cpu = smp_processor_id();
void (*play_dead_at_ckseg1)(int *);
idle_task_exit();
- switch (read_c0_prid() & PRID_REV_MASK) {
+
+ prid_imp = read_c0_prid() & PRID_IMP_MASK;
+ prid_rev = read_c0_prid() & PRID_REV_MASK;
+
+ if (prid_imp == PRID_IMP_LOONGSON_64G) {
+ play_dead_at_ckseg1 =
+ (void *)CKSEG1ADDR((unsigned long)loongson3_type3_play_dead);
+ goto out;
+ }
+
+ switch (prid_rev) {
case PRID_REV_LOONGSON3A_R1:
default:
play_dead_at_ckseg1 =
- (void *)CKSEG1ADDR((unsigned long)loongson3a_r1_play_dead);
+ (void *)CKSEG1ADDR((unsigned long)loongson3_type1_play_dead);
+ break;
+ case PRID_REV_LOONGSON3B_R1:
+ case PRID_REV_LOONGSON3B_R2:
+ play_dead_at_ckseg1 =
+ (void *)CKSEG1ADDR((unsigned long)loongson3_type2_play_dead);
break;
case PRID_REV_LOONGSON3A_R2_0:
case PRID_REV_LOONGSON3A_R2_1:
case PRID_REV_LOONGSON3A_R3_0:
case PRID_REV_LOONGSON3A_R3_1:
play_dead_at_ckseg1 =
- (void *)CKSEG1ADDR((unsigned long)loongson3a_r2r3_play_dead);
- break;
- case PRID_REV_LOONGSON3B_R1:
- case PRID_REV_LOONGSON3B_R2:
- play_dead_at_ckseg1 =
- (void *)CKSEG1ADDR((unsigned long)loongson3b_play_dead);
+ (void *)CKSEG1ADDR((unsigned long)loongson3_type3_play_dead);
break;
}
+
+out:
state_addr = &per_cpu(cpu_state, cpu);
mb();
play_dead_at_ckseg1(state_addr);
@@ -1267,7 +1267,8 @@ static void probe_pcache(void)
c->dcache.ways *
c->dcache.linesz;
c->dcache.waybit = 0;
- if ((prid & PRID_REV_MASK) >= PRID_REV_LOONGSON3A_R2_0)
+ if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >=
+ (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0))
c->options |= MIPS_CPU_PREFETCH;
break;
@@ -9,6 +9,9 @@
#include <loongson.h>
#include <boot_param.h>
#include <loongson_hwmon.h>
+#include <loongson_regs.h>
+
+static int csr_temp_enable = 0;
/*
* Loongson-3 series cpu has two sensors inside,
@@ -20,8 +23,14 @@ int loongson3_cpu_temp(int cpu)
{
u32 reg, prid_rev;
+ if (csr_temp_enable) {
+ reg = (csr_readl(LOONGSON_CSR_CPUTEMP) & 0xff);
+ goto out;
+ }
+
reg = LOONGSON_CHIPTEMP(cpu);
prid_rev = read_c0_prid() & PRID_REV_MASK;
+
switch (prid_rev) {
case PRID_REV_LOONGSON3A_R1:
reg = (reg >> 8) & 0xff;
@@ -34,9 +43,12 @@ int loongson3_cpu_temp(int cpu)
break;
case PRID_REV_LOONGSON3A_R3_0:
case PRID_REV_LOONGSON3A_R3_1:
+ default:
reg = (reg & 0xffff)*731/0x4000 - 273;
break;
}
+
+out:
return (int)reg * 1000;
}
@@ -159,6 +171,9 @@ static int __init loongson_hwmon_init(void)
pr_info("Loongson Hwmon Enter...\n");
+ if (cpu_has_csr())
+ csr_temp_enable = csr_readl(LOONGSON_CSR_FEATURES) & LOONGSON_CSRF_TEMP;
+
cpu_hwmon_dev = hwmon_device_register(NULL);
if (IS_ERR(cpu_hwmon_dev)) {
ret = -ENOMEM;
All Loongson-3 CPU family: Code-name Brand-name PRId Loongson-3A R1 Loongson-3A1000 0x6305 Loongson-3A R2 Loongson-3A2000 0x6308 Loongson-3A R2.1 Loongson-3A2000 0x630c Loongson-3A R3 Loongson-3A3000 0x6309 Loongson-3A R3.1 Loongson-3A3000 0x630d Loongson-3A R4 Loongson-3A4000 0xc000 Loongson-3B R1 Loongson-3B1000 0x6306 Loongson-3B R2 Loongson-3B1500 0x6307 Features of R4 revision of Loongson-3A: - All R2/R3 features, including SFB, V-Cache, FTLB, RIXI, DSP, etc. - Support variable ASID bits. - Support MSA and VZ extensions. - Support CPUCFG (CPU config) and CSR (Control and Status Register) extensions. - 64 entries of VTLB (classic TLB), 2048 entries of FTLB (8-way set-associative). Now 64-bit Loongson processors has three types of PRID.IMP: 0x6300 is the classic one so we call it PRID_IMP_LOONGSON_64C (e.g., Loongson-2E/ 2F/3A1000/3B1000/3B1500/3A2000/3A3000), 0x6100 is for some processors which has reduced capabilities so we call it PRID_IMP_LOONGSON_64R (e.g., Loongson-2K), 0xc000 is supposed to cover all new processors in general (e.g., Loongson-3A4000+) so we call it PRID_IMP_LOONGSON_64G. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> --- arch/mips/Kconfig | 2 + arch/mips/include/asm/cpu.h | 4 +- .../asm/mach-loongson64/kernel-entry-init.h | 28 +++++-- arch/mips/kernel/cpu-probe.c | 16 +++- arch/mips/kernel/idle.c | 3 +- arch/mips/loongson64/loongson-3/smp.c | 90 ++++++++++++---------- arch/mips/mm/c-r4k.c | 3 +- drivers/platform/mips/cpu_hwmon.c | 15 ++++ 8 files changed, 111 insertions(+), 50 deletions(-)