@@ -58,6 +58,7 @@ config MIPS
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_DMA_CONTIGUOUS
select HAVE_DYNAMIC_FTRACE
+ select HAVE_DYNAMIC_FTRACE_WITH_REGS
select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2
select HAVE_EXIT_THREAD
select HAVE_FAST_GUP
@@ -76,6 +76,11 @@ do { \
#ifdef CONFIG_DYNAMIC_FTRACE
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+#define ARCH_SUPPORTS_FTRACE_OPS 1
+#endif
+
static inline unsigned long ftrace_call_adjust(unsigned long addr)
{
return addr;
@@ -49,40 +49,89 @@ void arch_ftrace_update_code(int command)
#define DONT_SET 0xffffffff
static struct ftrace_insn jal_ftrace_caller __read_mostly;
-static struct ftrace_insn la_mcount __read_mostly;
+static struct ftrace_insn la_ftrace_caller __read_mostly;
static struct ftrace_insn nop_kernel __read_mostly;
static struct ftrace_insn nop_module __read_mostly;
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+static struct ftrace_insn jal_ftrace_regs_caller __read_mostly;
+static struct ftrace_insn la_ftrace_regs_caller __read_mostly;
+#endif
+
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
static struct ftrace_insn j_ftrace_graph_caller __read_mostly;
#endif
+/*
+ * The details about the calling site of mcount on MIPS
+ *
+ * 1. For kernel:
+ *
+ * move at, ra
+ * jal _mcount --> nop
+ * sub sp, sp, 8 --> nop (CONFIG_32BIT)
+ *
+ * 2. For modules:
+ *
+ * 2.1 For KBUILD_MCOUNT_RA_ADDRESS and CONFIG_32BIT
+ *
+ * lui v1, hi_16bit_of_mcount --> b 1f (0x10000005)
+ * addiu v1, v1, low_16bit_of_mcount --> nop (CONFIG_32BIT)
+ * move at, ra
+ * move $12, ra_address
+ * jalr v1
+ * sub sp, sp, 8
+ * 1: offset = 5 instructions
+ * 2.2 For the Other situations
+ *
+ * lui v1, hi_16bit_of_mcount --> b 1f (0x10000004)
+ * addiu v1, v1, low_16bit_of_mcount --> nop (CONFIG_32BIT)
+ * move at, ra
+ * jalr v1
+ * nop | move $12, ra_address | sub sp, sp, 8
+ * 1: offset = 4 instructions
+ */
+
static inline void ftrace_dyn_arch_init_insns(void)
{
u32 *buf;
unsigned int v1 = 3;
- /* la v1, _mcount */
- buf = (u32 *)&la_mcount;
- UASM_i_LA(&buf, v1, MCOUNT_ADDR);
-#ifdef CONFIG_64BIT
- la_mcount.code[1] = DONT_SET;
-#endif
+ /* la v1, ftrace_caller */
+ buf = (u32 *)&la_ftrace_caller;
+ UASM_i_LA(&buf, v1, FTRACE_ADDR);
- /* jal (ftrace_caller + 8), jump over the first two instruction */
buf = (u32 *)&jal_ftrace_caller;
- uasm_i_jal(&buf, (FTRACE_ADDR + 8) & JUMP_RANGE_MASK);
+#ifdef CONFIG_32BIT
+ /* jal (ftrace_caller + 4), jump over the sp restore instruction */
+ uasm_i_jal(&buf, (FTRACE_ADDR + 4) & JUMP_RANGE_MASK);
+#else
+ uasm_i_jal(&buf, FTRACE_ADDR & JUMP_RANGE_MASK);
+#endif
jal_ftrace_caller.code[1] = DONT_SET;
nop_kernel.code[0] = INSN_NOP;
- nop_module.code[0] = INSN_B_1F;
-
#ifdef CONFIG_64BIT
nop_kernel.code[1] = DONT_SET;
- nop_module.code[1] = DONT_SET;
#else
nop_kernel.code[1] = INSN_NOP;
+#endif
+ nop_module.code[0] = INSN_B_1F;
nop_module.code[1] = INSN_NOP;
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+ /* la v1, ftrace_regs_caller */
+ buf = (u32 *)&la_ftrace_regs_caller;
+ UASM_i_LA(&buf, v1, FTRACE_REGS_ADDR);
+
+ /* jal ftrace_regs_caller */
+ buf = (u32 *)&jal_ftrace_regs_caller;
+#ifdef CONFIG_32BIT
+ uasm_i_jal(&buf, (FTRACE_REGS_ADDR + 4) & JUMP_RANGE_MASK);
+#else
+ uasm_i_jal(&buf, FTRACE_REGS_ADDR & JUMP_RANGE_MASK);
+#endif
+ jal_ftrace_regs_caller.code[1] = DONT_SET;
#endif
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -119,36 +168,6 @@ static int ftrace_modify_code(unsigned long ip, struct ftrace_insn insns)
return 0;
}
-/*
- * The details about the calling site of mcount on MIPS
- *
- * 1. For kernel:
- *
- * move at, ra
- * jal _mcount --> nop
- * sub sp, sp, 8 --> nop (CONFIG_32BIT)
- *
- * 2. For modules:
- *
- * 2.1 For KBUILD_MCOUNT_RA_ADDRESS and CONFIG_32BIT
- *
- * lui v1, hi_16bit_of_mcount --> b 1f (0x10000005)
- * addiu v1, v1, low_16bit_of_mcount --> nop (CONFIG_32BIT)
- * move at, ra
- * move $12, ra_address
- * jalr v1
- * sub sp, sp, 8
- * 1: offset = 5 instructions
- * 2.2 For the Other situations
- *
- * lui v1, hi_16bit_of_mcount --> b 1f (0x10000004)
- * addiu v1, v1, low_16bit_of_mcount --> nop (CONFIG_32BIT)
- * move at, ra
- * jalr v1
- * nop | move $12, ra_address | sub sp, sp, 8
- * 1: offset = 4 instructions
- */
-
int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
@@ -164,41 +183,79 @@ int ftrace_make_nop(struct module *mod,
return ftrace_modify_code(ip, insns);
}
+static int __ftrace_make_call(unsigned long ip, unsigned long addr)
+{
+ u32 *buf;
+ struct ftrace_insn insns;
+ unsigned int v1 = 3;
+
+ if (core_kernel_text(ip)) {
+ /* PC-region */
+ if ((addr & ~JUMP_RANGE_MASK) != (ip & ~JUMP_RANGE_MASK))
+ return -EINVAL;
+
+ insns.code[0] = INSN_JAL(addr);
+ insns.code[1] = DONT_SET;
+ } else {
+ buf = (u32 *)&insns;
+ UASM_i_LA(&buf, v1, addr);
+ }
+
+ return ftrace_modify_code(ip, insns);
+}
+
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
struct ftrace_insn insns;
unsigned long ip = rec->ip;
- insns = core_kernel_text(ip) ? jal_ftrace_caller : la_mcount;
+ if (addr == FTRACE_ADDR)
+ insns = core_kernel_text(ip) ? jal_ftrace_caller : la_ftrace_caller;
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+ else if (addr == FTRACE_REGS_ADDR)
+ insns = core_kernel_text(ip) ? jal_ftrace_regs_caller : la_ftrace_regs_caller;
+#endif
+ else
+ return __ftrace_make_call(ip, addr);
return ftrace_modify_code(ip, insns);
}
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
+ unsigned long addr)
+{
+ unsigned long ip = rec->ip;
+
+ return __ftrace_make_call(ip, addr);
+}
+#endif
+
#define FTRACE_CALL_IP ((unsigned long)(&ftrace_call))
int ftrace_update_ftrace_func(ftrace_func_t func)
{
+ int faulted;
struct ftrace_insn insns;
insns.code[0] = INSN_JAL((unsigned long)func);
insns.code[1] = DONT_SET;
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+#define FTRACE_REGS_CALL_IP ((unsigned long)(&ftrace_regs_call))
+ faulted = ftrace_modify_code(FTRACE_REGS_CALL_IP, insns);
+ if (unlikely(faulted))
+ return -EFAULT;
+#endif
+
return ftrace_modify_code(FTRACE_CALL_IP, insns);
}
int __init ftrace_dyn_arch_init(void)
{
- struct ftrace_insn insns;
-
- insns.code[0] = INSN_NOP;
- insns.code[1] = DONT_SET;
-
/* Encode the instructions when booting */
ftrace_dyn_arch_init_insns();
- /* Remove "b ftrace_stub" to ensure ftrace_caller() is executed */
- ftrace_modify_code(MCOUNT_ADDR, insns);
-
return 0;
}
#endif /* CONFIG_DYNAMIC_FTRACE */
@@ -51,11 +51,83 @@
PTR_ADDIU sp, PT_SIZE
.endm
+ .macro MCOUNT_SAVE_MORE_REGS
+ PTR_SUBU sp, PT_SIZE
+ PTR_S ra, PT_R31(sp)
+ PTR_S AT, PT_R1(sp)
+ PTR_S a0, PT_R4(sp)
+ PTR_S a1, PT_R5(sp)
+ PTR_S a2, PT_R6(sp)
+ PTR_S a3, PT_R7(sp)
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+ PTR_S a4, PT_R8(sp)
+ PTR_S a5, PT_R9(sp)
+ PTR_S a6, PT_R10(sp)
+ PTR_S a7, PT_R11(sp)
+#endif
+ PTR_S s0, PT_R16(sp)
+ PTR_S s1, PT_R17(sp)
+ PTR_S s2, PT_R18(sp)
+ PTR_S s3, PT_R19(sp)
+ PTR_S s4, PT_R20(sp)
+ PTR_S s5, PT_R21(sp)
+ PTR_S s6, PT_R22(sp)
+ PTR_S s7, PT_R23(sp)
+ PTR_S gp, PT_R28(sp)
+ PTR_S sp, PT_R29(sp)
+ PTR_S s8, PT_R30(sp)
+ .endm
+
+ .macro MCOUNT_RESTORE_MORE_REGS
+ PTR_L ra, PT_R31(sp)
+ PTR_L AT, PT_R1(sp)
+ PTR_L v0, PT_R2(sp)
+ PTR_L v1, PT_R3(sp)
+ PTR_L a0, PT_R4(sp)
+ PTR_L a1, PT_R5(sp)
+ PTR_L a2, PT_R6(sp)
+ PTR_L a3, PT_R7(sp)
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+ PTR_L a4, PT_R8(sp)
+ PTR_L a5, PT_R9(sp)
+ PTR_L a6, PT_R10(sp)
+ PTR_L a7, PT_R11(sp)
+#endif
+ PTR_L s0, PT_R16(sp)
+ PTR_L s1, PT_R17(sp)
+ PTR_L s2, PT_R18(sp)
+ PTR_L s3, PT_R19(sp)
+ PTR_L s4, PT_R20(sp)
+ PTR_L s5, PT_R21(sp)
+ PTR_L s6, PT_R22(sp)
+ PTR_L s7, PT_R23(sp)
+ PTR_L gp, PT_R28(sp)
+ PTR_L sp, PT_R29(sp)
+ PTR_L s8, PT_R30(sp)
+ PTR_ADDIU sp, PT_SIZE
+ .endm
+
.macro RETURN_BACK
jr ra
move ra, AT
.endm
+ .macro is_in_module addr res temp1 temp2
+ PTR_LA \res, _stext
+ sltu \temp1, \addr, \res /* temp1 = (addr < _stext) */
+ PTR_LA \res, _etext
+ sltu \temp2, \res, \addr /* temp2 = (addr > _etext) */
+ or \res, \temp1, \temp2
+ .endm
+
+ .macro adjust_module_callsite addr
+#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
+ PTR_SUBU \addr, \addr, 16 /* arg1: adjust to module's recorded callsite */
+#else
+ PTR_SUBU \addr, \addr, 12
+#endif
+ .endm
+
/*
* The -mmcount-ra-address option of gcc 4.5 uses register $12 to pass
* the location of the parent's return address.
@@ -64,55 +136,76 @@
#ifdef CONFIG_DYNAMIC_FTRACE
-NESTED(ftrace_caller, PT_SIZE, ra)
- .globl _mcount
-_mcount:
+NESTED(_mcount, PT_SIZE, ra)
EXPORT_SYMBOL(_mcount)
- b ftrace_stub
+#ifdef CONFIG_32BIT
+ addiu sp, sp, 8
+#endif
+ .globl ftrace_stub
+ftrace_stub:
+ RETURN_BACK
+ END(_mcount)
+
+NESTED(ftrace_caller, PT_SIZE, ra)
#ifdef CONFIG_32BIT
addiu sp,sp,8
-#else
- nop
#endif
- /* When tracing is activated, it calls ftrace_caller+8 (aka here) */
MCOUNT_SAVE_REGS
#ifdef KBUILD_MCOUNT_RA_ADDRESS
PTR_S MCOUNT_RA_ADDRESS_REG, PT_R12(sp)
#endif
PTR_SUBU a0, ra, 8 /* arg1: self address */
- PTR_LA t1, _stext
- sltu t2, a0, t1 /* t2 = (a0 < _stext) */
- PTR_LA t1, _etext
- sltu t3, t1, a0 /* t3 = (a0 > _etext) */
- or t1, t2, t3
+ is_in_module a0, t1, t8, t9
beqz t1, ftrace_call
- nop
-#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
- PTR_SUBU a0, a0, 16 /* arg1: adjust to module's recorded callsite */
-#else
- PTR_SUBU a0, a0, 12
-#endif
+ nop
+ adjust_module_callsite a0
.globl ftrace_call
ftrace_call:
nop /* a placeholder for the call to a real tracing function */
- move a1, AT /* arg2: parent's return address */
+ move a1, AT /* arg2: parent's return address */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
.globl ftrace_graph_call
ftrace_graph_call:
nop
- nop
+ nop
#endif
MCOUNT_RESTORE_REGS
- .globl ftrace_stub
-ftrace_stub:
RETURN_BACK
END(ftrace_caller)
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+NESTED(ftrace_regs_caller, PT_SIZE, ra)
+#ifdef CONFIG_32BIT
+ addiu sp, sp, 8
+#endif
+ MCOUNT_SAVE_MORE_REGS
+#ifdef KBUILD_MCOUNT_RA_ADDRESS
+ PTR_S MCOUNT_RA_ADDRESS_REG, PT_R12(sp)
+#endif
+
+ move a2, zero /* arg3: NULL */
+ move a3, sp /* arg4: fregs address */
+ PTR_SUBU a0, ra, 8 /* arg1: self address */
+ is_in_module a0, t1, t8, t9
+ beqz t1, ftrace_regs_call
+ nop
+ adjust_module_callsite a0
+
+ .globl ftrace_regs_call
+ftrace_regs_call:
+ nop
+ move a1, AT /* arg2: parent's return address */
+
+ MCOUNT_RESTORE_REGS
+ RETURN_BACK
+ END(ftrace_regs_caller)
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
+
#else /* ! CONFIG_DYNAMIC_FTRACE */
NESTED(_mcount, PT_SIZE, ra)
In the past, we have always used the address of _mcount as the address of ftrace_caller. It reduces one ftrace_modify_code operation when do ftrace on modules on 64Bit platform in this way. In order to provide DYNAMIC_FTRACE_WITH_REGS, we have to take _mcount out of ftrace_caller and add a new definition of _mcount. It is necessary to modify 2 instructions. Also add the definition of ftrace_regs_caller. ftrace_regs_caller will store and restore more registers. Of course, some functions in ftrace.c also need to consider ftrace_regs_caller. Modify these functions and add the related code of ftrace_regs_caller. Signed-off-by: Jinyang He <hejinyang@loongson.cn> --- arch/mips/Kconfig | 1 + arch/mips/include/asm/ftrace.h | 5 ++ arch/mips/kernel/ftrace.c | 159 ++++++++++++++++++++++++++++------------- arch/mips/kernel/mcount.S | 137 +++++++++++++++++++++++++++++------ 4 files changed, 229 insertions(+), 73 deletions(-)