From patchwork Thu May 12 19:33:40 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Zhou Yanjie X-Patchwork-Id: 12848060 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8E11DC433FE for ; Thu, 12 May 2022 19:34:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1358064AbiELTeL (ORCPT ); Thu, 12 May 2022 15:34:11 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39308 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1358059AbiELTeK (ORCPT ); Thu, 12 May 2022 15:34:10 -0400 Received: from out28-194.mail.aliyun.com (out28-194.mail.aliyun.com [115.124.28.194]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C120E2375EA; Thu, 12 May 2022 12:34:08 -0700 (PDT) X-Alimail-AntiSpam: AC=CONTINUE;BC=0.07436302|-1;CH=green;DM=|CONTINUE|false|;DS=CONTINUE|ham_regular_dialog|0.161995-0.000984213-0.83702;FP=0|0|0|0|0|-1|-1|-1;HT=ay29a033018047213;MF=zhouyanjie@wanyeetech.com;NM=1;PH=DS;RN=10;RT=10;SR=0;TI=SMTPD_---.NjCS17e_1652384045; Received: from zhouyanjie-virtual-machine.localdomain(mailfrom:zhouyanjie@wanyeetech.com fp:SMTPD_---.NjCS17e_1652384045) by smtp.aliyun-inc.com(33.13.195.200); Fri, 13 May 2022 03:34:06 +0800 From: =?utf-8?b?5ZGo55Cw5p2wIChaaG91IFlhbmppZSk=?= To: tsbogend@alpha.franken.de, paul@crapouillou.net, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-mips@vger.kernel.org, dongsheng.qiu@ingenic.com, aric.pzqi@ingenic.com, rick.tyliu@ingenic.com Subject: [PATCH 2/3] MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards. Date: Fri, 13 May 2022 03:33:40 +0800 Message-Id: <1652384021-46309-3-git-send-email-zhouyanjie@wanyeetech.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1652384021-46309-1-git-send-email-zhouyanjie@wanyeetech.com> References: <1652384021-46309-1-git-send-email-zhouyanjie@wanyeetech.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org 1.Add SSI nodes for X1000 SoC and X1830 SoC from Ingenic. 2.Refresh SSI related nodes in CU1000-Neo and CU1830-Neo. 3.The X1830 SoC used by the CU1830-Neo and the X1000 SoC used by the CU1000-Neo are both single-core processors, therefore the "OST_CLK_PERCPU_TIMER" ABI should not be used in the OST nodes of the CU1830-Neo and CU1000-Neo, it is just a coincidence that there is no problem now. So replace the misused "OST_CLK_PERCPU_TIMER" ABI with the correct "OST_CLK_EVENT_TIMER" ABI. Signed-off-by: 周琰杰 (Zhou Yanjie) --- arch/mips/boot/dts/ingenic/cu1000-neo.dts | 77 ++++++++++++++++--------------- arch/mips/boot/dts/ingenic/cu1830-neo.dts | 76 +++++++++++++++--------------- arch/mips/boot/dts/ingenic/x1000.dtsi | 20 ++++++++ arch/mips/boot/dts/ingenic/x1830.dtsi | 39 ++++++++++++++++ 4 files changed, 138 insertions(+), 74 deletions(-) diff --git a/arch/mips/boot/dts/ingenic/cu1000-neo.dts b/arch/mips/boot/dts/ingenic/cu1000-neo.dts index 9c67b4f..b44d3b1 100644 --- a/arch/mips/boot/dts/ingenic/cu1000-neo.dts +++ b/arch/mips/boot/dts/ingenic/cu1000-neo.dts @@ -31,42 +31,6 @@ }; }; - ssi: spi-gpio { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - num-chipselects = <1>; - - mosi-gpios = <&gpd 2 GPIO_ACTIVE_HIGH>; - miso-gpios = <&gpd 3 GPIO_ACTIVE_HIGH>; - sck-gpios = <&gpd 0 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpd 1 GPIO_ACTIVE_HIGH>; - - status = "okay"; - - spi-max-frequency = <50000000>; - - sc16is752: expander@0 { - compatible = "nxp,sc16is752"; - reg = <0>; /* CE0 */ - spi-max-frequency = <4000000>; - - clocks = <&exclk_sc16is752>; - - interrupt-parent = <&gpc>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; - - gpio-controller; - #gpio-cells = <2>; - - exclk_sc16is752: sc16is752 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - }; - }; - wlan_pwrseq: msc1-pwrseq { compatible = "mmc-pwrseq-simple"; @@ -90,7 +54,7 @@ &ost { /* 1500 kHz for the system timer and clocksource */ - assigned-clocks = <&ost OST_CLK_PERCPU_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; + assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; assigned-clock-rates = <1500000>, <1500000>; }; @@ -101,6 +65,39 @@ pinctrl-0 = <&pins_uart2>; }; +&ssi { + status = "okay"; + + num-cs = <2>; + cs-gpios = <0>, <&gpc 20 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_ssi>; + + sc16is752: expander@0 { + compatible = "nxp,sc16is752"; + reg = <0>; /* CE0 */ + + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + spi-max-frequency = <4000000>; + + clocks = <&exclk_sc16is752>; + + interrupt-parent = <&gpc>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + exclk_sc16is752: sc16is752 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + }; +}; + &i2c0 { status = "okay"; @@ -225,6 +222,12 @@ bias-pull-up; }; + pins_ssi: ssi { + function = "ssi"; + groups = "ssi-dt-d", "ssi-dr-d", "ssi-clk-d", "ssi-ce0-d"; + bias-disable; + }; + pins_i2c0: i2c0 { function = "i2c0"; groups = "i2c0-data"; diff --git a/arch/mips/boot/dts/ingenic/cu1830-neo.dts b/arch/mips/boot/dts/ingenic/cu1830-neo.dts index 0727bc9..461efba 100644 --- a/arch/mips/boot/dts/ingenic/cu1830-neo.dts +++ b/arch/mips/boot/dts/ingenic/cu1830-neo.dts @@ -31,42 +31,6 @@ }; }; - ssi0: spi-gpio { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - num-chipselects = <1>; - - mosi-gpios = <&gpc 12 GPIO_ACTIVE_HIGH>; - miso-gpios = <&gpc 11 GPIO_ACTIVE_HIGH>; - sck-gpios = <&gpc 15 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpc 16 GPIO_ACTIVE_HIGH>; - - status = "okay"; - - spi-max-frequency = <50000000>; - - sc16is752: expander@0 { - compatible = "nxp,sc16is752"; - reg = <0>; /* CE0 */ - spi-max-frequency = <4000000>; - - clocks = <&exclk_sc16is752>; - - interrupt-parent = <&gpb>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>; - - gpio-controller; - #gpio-cells = <2>; - - exclk_sc16is752: sc16is752 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - }; - }; - wlan_pwrseq: msc1-pwrseq { compatible = "mmc-pwrseq-simple"; @@ -90,7 +54,7 @@ &ost { /* 1500 kHz for the system timer and clocksource */ - assigned-clocks = <&ost OST_CLK_PERCPU_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; + assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; assigned-clock-rates = <1500000>, <1500000>; }; @@ -101,6 +65,38 @@ pinctrl-0 = <&pins_uart1>; }; +&ssi0 { + status = "okay"; + + num-cs = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_ssi0>; + + sc16is752: expander@0 { + compatible = "nxp,sc16is752"; + reg = <0>; /* CE0 */ + + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + spi-max-frequency = <4000000>; + + clocks = <&exclk_sc16is752>; + + interrupt-parent = <&gpb>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + exclk_sc16is752: sc16is752 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + }; +}; + &i2c0 { status = "okay"; @@ -229,6 +225,12 @@ bias-pull-up; }; + pins_ssi0: ssi0 { + function = "ssi0"; + groups = "ssi0-dt", "ssi0-dr", "ssi0-clk", "ssi0-ce0", "ssi0-ce1"; + bias-disable; + }; + pins_i2c0: i2c0 { function = "i2c0"; groups = "i2c0-data"; diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi index 591692d..958a5ef 100644 --- a/arch/mips/boot/dts/ingenic/x1000.dtsi +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi @@ -259,6 +259,25 @@ status = "disabled"; }; + ssi: spi@10043000 { + compatible = "ingenic,x1000-spi"; + reg = <0x10043000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <8>; + + clocks = <&cgu X1000_CLK_SSI>; + clock-names = "spi"; + + dmas = <&pdma X1000_DMA_SSI0_RX 0xffffffff>, + <&pdma X1000_DMA_SSI0_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + i2c0: i2c-controller@10050000 { compatible = "ingenic,x1000-i2c"; reg = <0x10050000 0x1000>; @@ -304,6 +323,7 @@ pdma: dma-controller@13420000 { compatible = "ingenic,x1000-dma"; reg = <0x13420000 0x400>, <0x13421000 0x40>; + #dma-cells = <2>; interrupt-parent = <&intc>; diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi b/arch/mips/boot/dts/ingenic/x1830.dtsi index ffe6073..231c72a 100644 --- a/arch/mips/boot/dts/ingenic/x1830.dtsi +++ b/arch/mips/boot/dts/ingenic/x1830.dtsi @@ -241,6 +241,44 @@ status = "disabled"; }; + ssi0: spi@10043000 { + compatible = "ingenic,x1830-spi", "ingenic,x1000-spi"; + reg = <0x10043000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <9>; + + clocks = <&cgu X1830_CLK_SSI0>; + clock-names = "spi"; + + dmas = <&pdma X1830_DMA_SSI0_RX 0xffffffff>, + <&pdma X1830_DMA_SSI0_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + + ssi1: spi@10044000 { + compatible = "ingenic,x1830-spi", "ingenic,x1000-spi"; + reg = <0x10044000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <8>; + + clocks = <&cgu X1830_CLK_SSI1>; + clock-names = "spi"; + + dmas = <&pdma X1830_DMA_SSI1_RX 0xffffffff>, + <&pdma X1830_DMA_SSI1_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + i2c0: i2c-controller@10050000 { compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; reg = <0x10050000 0x1000>; @@ -295,6 +333,7 @@ pdma: dma-controller@13420000 { compatible = "ingenic,x1830-dma"; reg = <0x13420000 0x400>, <0x13421000 0x40>; + #dma-cells = <2>; interrupt-parent = <&intc>;