@@ -202,6 +202,8 @@ config PWM_IMX
config PWM_JZ4740
tristate "Ingenic JZ47xx PWM support"
depends on MACH_INGENIC
+ depends on COMMON_CLK
+ select INGENIC_TIMER
help
Generic PWM framework driver for Ingenic JZ47xx based
machines.
@@ -15,20 +15,19 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <linux/gpio.h>
#include <linux/kernel.h>
+#include <linux/mfd/ingenic-tcu.h>
#include <linux/module.h>
-#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
-
-#include <asm/mach-jz4740/timer.h>
+#include <linux/regmap.h>
#define NUM_PWM 8
struct jz4740_pwm_chip {
struct pwm_chip chip;
- struct clk *clk;
+ struct clk *clks[NUM_PWM];
+ struct regmap *map;
};
static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
@@ -38,6 +37,11 @@ static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
{
+ struct jz4740_pwm_chip *jz = to_jz4740(chip);
+ struct clk *clk;
+ char clk_name[16];
+ int ret;
+
/*
* Timers 0 and 1 are used for system tasks, so they are unavailable
* for use as PWMs.
@@ -45,65 +49,89 @@ static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
if (pwm->hwpwm < 2)
return -EBUSY;
- jz4740_timer_start(pwm->hwpwm);
+ snprintf(clk_name, sizeof(clk_name), "timer%u", pwm->hwpwm);
+
+ clk = clk_get(chip->dev, clk_name);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ clk_put(clk);
+ return ret;
+ }
+
+ jz->clks[pwm->hwpwm] = clk;
return 0;
}
static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
- jz4740_timer_set_ctrl(pwm->hwpwm, 0);
+ struct jz4740_pwm_chip *jz = to_jz4740(chip);
+ struct clk *clk = jz->clks[pwm->hwpwm];
- jz4740_timer_stop(pwm->hwpwm);
+ clk_disable_unprepare(clk);
+ clk_put(clk);
}
static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
- uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm);
+ struct jz4740_pwm_chip *jz = to_jz4740(chip);
- ctrl |= JZ_TIMER_CTRL_PWM_ENABLE;
- jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
- jz4740_timer_enable(pwm->hwpwm);
+ /* Enable PWM output */
+ regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_EN, TCU_TCSR_PWM_EN);
+ /* Start counter */
+ regmap_write(jz->map, TCU_REG_TESR, BIT(pwm->hwpwm));
return 0;
}
static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
- uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
+ struct jz4740_pwm_chip *jz = to_jz4740(chip);
/* Disable PWM output.
* In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the
* counter is stopped, while in TCU1 mode the order does not matter.
*/
- ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE;
- jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+ regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_EN, 0);
/* Stop counter */
- jz4740_timer_disable(pwm->hwpwm);
+ regmap_write(jz->map, TCU_REG_TECR, BIT(pwm->hwpwm));
}
static int jz4740_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
+ struct clk *clk = jz4740->clks[pwm->hwpwm];
+ unsigned long rate, new_rate, period, duty;
unsigned long long tmp;
- unsigned long period, duty;
- unsigned int prescaler = 0;
- uint16_t ctrl;
+ unsigned int tcsr;
bool is_enabled;
- tmp = (unsigned long long)clk_get_rate(jz4740->clk) * period_ns;
- do_div(tmp, 1000000000);
- period = tmp;
+ rate = clk_get_rate(clk);
+
+ for (;;) {
+ tmp = (unsigned long long) rate * period_ns;
+ do_div(tmp, 1000000000);
- while (period > 0xffff && prescaler < 6) {
- period >>= 2;
- ++prescaler;
+ if (tmp <= 0xffff)
+ break;
+
+ new_rate = clk_round_rate(clk, rate / 2);
+
+ if (new_rate < rate)
+ rate = new_rate;
+ else
+ return -EINVAL;
}
- if (prescaler == 6)
- return -EINVAL;
+ clk_set_rate(clk, rate);
+
+ period = tmp;
tmp = (unsigned long long)period * duty_ns;
do_div(tmp, period_ns);
@@ -112,18 +140,23 @@ static int jz4740_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
if (duty >= period)
duty = period - 1;
- is_enabled = jz4740_timer_is_enabled(pwm->hwpwm);
+ regmap_read(jz4740->map, TCU_REG_TER, &tcsr);
+ is_enabled = tcsr & BIT(pwm->hwpwm);
if (is_enabled)
jz4740_pwm_disable(chip, pwm);
- jz4740_timer_set_count(pwm->hwpwm, 0);
- jz4740_timer_set_duty(pwm->hwpwm, duty);
- jz4740_timer_set_period(pwm->hwpwm, period);
+ /* Set abrupt shutdown */
+ regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_SD, TCU_TCSR_PWM_SD);
+
+ /* Reset counter to 0 */
+ regmap_write(jz4740->map, TCU_REG_TCNTc(pwm->hwpwm), 0);
- ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT |
- JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
+ /* Set duty */
+ regmap_write(jz4740->map, TCU_REG_TDHRc(pwm->hwpwm), duty);
- jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+ /* Set period */
+ regmap_write(jz4740->map, TCU_REG_TDFRc(pwm->hwpwm), period);
if (is_enabled)
jz4740_pwm_enable(chip, pwm);
@@ -134,18 +167,19 @@ static int jz4740_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
static int jz4740_pwm_set_polarity(struct pwm_chip *chip,
struct pwm_device *pwm, enum pwm_polarity polarity)
{
- uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm);
+ struct jz4740_pwm_chip *jz = to_jz4740(chip);
switch (polarity) {
case PWM_POLARITY_NORMAL:
- ctrl &= ~JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
+ regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_INITL_HIGH, 0);
break;
case PWM_POLARITY_INVERSED:
- ctrl |= JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
+ regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_INITL_HIGH, TCU_TCSR_PWM_INITL_HIGH);
break;
}
- jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
return 0;
}
@@ -162,16 +196,19 @@ static const struct pwm_ops jz4740_pwm_ops = {
static int jz4740_pwm_probe(struct platform_device *pdev)
{
struct jz4740_pwm_chip *jz4740;
+ struct device *dev = &pdev->dev;
- jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL);
+ jz4740 = devm_kzalloc(dev, sizeof(*jz4740), GFP_KERNEL);
if (!jz4740)
return -ENOMEM;
- jz4740->clk = devm_clk_get(&pdev->dev, "ext");
- if (IS_ERR(jz4740->clk))
- return PTR_ERR(jz4740->clk);
+ jz4740->map = dev_get_regmap(dev->parent, NULL);
+ if (!jz4740->map) {
+ dev_err(dev, "regmap not found\n");
+ return -EINVAL;
+ }
- jz4740->chip.dev = &pdev->dev;
+ jz4740->chip.dev = dev;
jz4740->chip.ops = &jz4740_pwm_ops;
jz4740->chip.npwm = NUM_PWM;
jz4740->chip.base = -1;
The ingenic-timer "TCU" driver provides us with a regmap, that we can use to safely access the TCU registers. It also provides us with clocks, that can be (un)gated, reparented or reclocked from devicetree, instead of having these settings hardcoded in this driver. While this driver is devicetree-compatible, it is never (as of now) probed from devicetree, so this change does not introduce a ABI problem with current devicetree files. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- Notes: v5: New patch v6: Drop requirement of probing from devicetree v7: No change v8: Drop useless <linux/clk-provider.h> include drivers/pwm/Kconfig | 2 + drivers/pwm/pwm-jz4740.c | 123 ++++++++++++++++++++++++++++++----------------- 2 files changed, 82 insertions(+), 43 deletions(-)