@@ -206,7 +206,6 @@ config ATH79
select COMMON_CLK
select CLKDEV_LOOKUP
select IRQ_MIPS_CPU
- select MIPS_MACHINE
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
@@ -1,79 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
if ATH79
-menu "Atheros AR71XX/AR724X/AR913X machine selection"
-
-config ATH79_MACH_AP121
- bool "Atheros AP121 reference board"
- select SOC_AR933X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros AP121 reference board.
-
-config ATH79_MACH_AP136
- bool "Atheros AP136 reference board"
- select SOC_QCA955X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros AP136 reference board.
-
-config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"
- select SOC_AR913X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros AP81 reference board.
-
-config ATH79_MACH_DB120
- bool "Atheros DB120 reference board"
- select SOC_AR934X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros DB120 reference board.
-
-config ATH79_MACH_PB44
- bool "Atheros PB44 reference board"
- select SOC_AR71XX
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- help
- Say 'Y' here if you want your kernel to support the
- Atheros PB44 reference board.
-
-config ATH79_MACH_UBNT_XM
- bool "Ubiquiti Networks XM (rev 1.0) board"
- select SOC_AR724X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- help
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
-
-endmenu
-
config SOC_AR71XX
select HAVE_PCI
def_bool n
@@ -22,13 +22,3 @@ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
-
-#
-# Machines
-#
-obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
-obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
-obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
-obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
-obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
-obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
@@ -26,7 +26,6 @@
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
-#include "machtypes.h"
#define AR71XX_BASE_FREQ 40000000
#define AR724X_BASE_FREQ 40000000
deleted file mode 100644
@@ -1,92 +0,0 @@
-/*
- * Atheros AP121 board support
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "machtypes.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-
-#define AP121_GPIO_LED_WLAN 0
-#define AP121_GPIO_LED_USB 1
-
-#define AP121_GPIO_BTN_JUMPSTART 11
-#define AP121_GPIO_BTN_RESET 12
-
-#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
-
-#define AP121_CAL_DATA_ADDR 0x1fff1000
-
-static struct gpio_led ap121_leds_gpio[] __initdata = {
- {
- .name = "ap121:green:usb",
- .gpio = AP121_GPIO_LED_USB,
- .active_low = 0,
- },
- {
- .name = "ap121:green:wlan",
- .gpio = AP121_GPIO_LED_WLAN,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button ap121_gpio_keys[] __initdata = {
- {
- .desc = "jumpstart button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP121_GPIO_BTN_JUMPSTART,
- .active_low = 1,
- },
- {
- .desc = "reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP121_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct spi_board_info ap121_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l1606e",
- }
-};
-
-static struct ath79_spi_platform_data ap121_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-static void __init ap121_setup(void)
-{
- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
- ap121_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap121_gpio_keys),
- ap121_gpio_keys);
-
- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
- ARRAY_SIZE(ap121_spi_info));
- ath79_register_usb();
- ath79_register_wmac(cal_data);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
- ap121_setup);
deleted file mode 100644
@@ -1,156 +0,0 @@
-/*
- * Qualcomm Atheros AP136 reference board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-
-#include "machtypes.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "pci.h"
-
-#define AP136_GPIO_LED_STATUS_RED 14
-#define AP136_GPIO_LED_STATUS_GREEN 19
-#define AP136_GPIO_LED_USB 4
-#define AP136_GPIO_LED_WLAN_2G 13
-#define AP136_GPIO_LED_WLAN_5G 12
-#define AP136_GPIO_LED_WPS_RED 15
-#define AP136_GPIO_LED_WPS_GREEN 20
-
-#define AP136_GPIO_BTN_WPS 16
-#define AP136_GPIO_BTN_RFKILL 21
-
-#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
-
-#define AP136_WMAC_CALDATA_OFFSET 0x1000
-#define AP136_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led ap136_leds_gpio[] __initdata = {
- {
- .name = "qca:green:status",
- .gpio = AP136_GPIO_LED_STATUS_GREEN,
- .active_low = 1,
- },
- {
- .name = "qca:red:status",
- .gpio = AP136_GPIO_LED_STATUS_RED,
- .active_low = 1,
- },
- {
- .name = "qca:green:wps",
- .gpio = AP136_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- },
- {
- .name = "qca:red:wps",
- .gpio = AP136_GPIO_LED_WPS_RED,
- .active_low = 1,
- },
- {
- .name = "qca:red:wlan-2g",
- .gpio = AP136_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "qca:red:usb",
- .gpio = AP136_GPIO_LED_USB,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP136_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP136_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
-};
-
-static struct spi_board_info ap136_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l6405d",
- }
-};
-
-static struct ath79_spi_platform_data ap136_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-#ifdef CONFIG_PCI
-static struct ath9k_platform_data ap136_ath9k_data;
-
-static int ap136_pci_plat_dev_init(struct pci_dev *dev)
-{
- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
- dev->dev.platform_data = &ap136_ath9k_data;
-
- return 0;
-}
-
-static void __init ap136_pci_init(u8 *eeprom)
-{
- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
- sizeof(ap136_ath9k_data.eeprom_data));
-
- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
- ath79_register_pci();
-}
-#else
-static inline void ap136_pci_init(u8 *eeprom) {}
-#endif /* CONFIG_PCI */
-
-static void __init ap136_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
- ap136_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap136_gpio_keys),
- ap136_gpio_keys);
- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
- ARRAY_SIZE(ap136_spi_info));
- ath79_register_usb();
- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
- "Atheros AP136-010 reference board",
- ap136_setup);
deleted file mode 100644
@@ -1,100 +0,0 @@
-/*
- * Atheros AP81 board support
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "machtypes.h"
-#include "dev-wmac.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-
-#define AP81_GPIO_LED_STATUS 1
-#define AP81_GPIO_LED_AOSS 3
-#define AP81_GPIO_LED_WLAN 6
-#define AP81_GPIO_LED_POWER 14
-
-#define AP81_GPIO_BTN_SW4 12
-#define AP81_GPIO_BTN_SW1 21
-
-#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL)
-
-#define AP81_CAL_DATA_ADDR 0x1fff1000
-
-static struct gpio_led ap81_leds_gpio[] __initdata = {
- {
- .name = "ap81:green:status",
- .gpio = AP81_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "ap81:amber:aoss",
- .gpio = AP81_GPIO_LED_AOSS,
- .active_low = 1,
- }, {
- .name = "ap81:green:wlan",
- .gpio = AP81_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "ap81:green:power",
- .gpio = AP81_GPIO_LED_POWER,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ap81_gpio_keys[] __initdata = {
- {
- .desc = "sw1",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP81_GPIO_BTN_SW1,
- .active_low = 1,
- } , {
- .desc = "sw4",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP81_GPIO_BTN_SW4,
- .active_low = 1,
- }
-};
-
-static struct spi_board_info ap81_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
- }
-};
-
-static struct ath79_spi_platform_data ap81_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-static void __init ap81_setup(void)
-{
- u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
- ap81_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap81_gpio_keys),
- ap81_gpio_keys);
- ath79_register_spi(&ap81_spi_data, ap81_spi_info,
- ARRAY_SIZE(ap81_spi_info));
- ath79_register_wmac(cal_data);
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
- ap81_setup);
deleted file mode 100644
@@ -1,136 +0,0 @@
-/*
- * Atheros DB120 reference board support
- *
- * Copyright (c) 2011 Qualcomm Atheros
- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-
-#include "machtypes.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "pci.h"
-
-#define DB120_GPIO_LED_WLAN_5G 12
-#define DB120_GPIO_LED_WLAN_2G 13
-#define DB120_GPIO_LED_STATUS 14
-#define DB120_GPIO_LED_WPS 15
-
-#define DB120_GPIO_BTN_WPS 16
-
-#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
-
-#define DB120_WMAC_CALDATA_OFFSET 0x1000
-#define DB120_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led db120_leds_gpio[] __initdata = {
- {
- .name = "db120:green:status",
- .gpio = DB120_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "db120:green:wps",
- .gpio = DB120_GPIO_LED_WPS,
- .active_low = 1,
- },
- {
- .name = "db120:green:wlan-5g",
- .gpio = DB120_GPIO_LED_WLAN_5G,
- .active_low = 1,
- },
- {
- .name = "db120:green:wlan-2g",
- .gpio = DB120_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button db120_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DB120_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static struct spi_board_info db120_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "s25sl064a",
- }
-};
-
-static struct ath79_spi_platform_data db120_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-#ifdef CONFIG_PCI
-static struct ath9k_platform_data db120_ath9k_data;
-
-static int db120_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 0:
- dev->dev.platform_data = &db120_ath9k_data;
- break;
- }
-
- return 0;
-}
-
-static void __init db120_pci_init(u8 *eeprom)
-{
- memcpy(db120_ath9k_data.eeprom_data, eeprom,
- sizeof(db120_ath9k_data.eeprom_data));
-
- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
- ath79_register_pci();
-}
-#else
-static inline void db120_pci_init(u8 *eeprom) {}
-#endif /* CONFIG_PCI */
-
-static void __init db120_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
- db120_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(db120_gpio_keys),
- db120_gpio_keys);
- ath79_register_spi(&db120_spi_data, db120_spi_info,
- ARRAY_SIZE(db120_spi_info));
- ath79_register_usb();
- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
- db120_setup);
deleted file mode 100644
@@ -1,128 +0,0 @@
-/*
- * Atheros PB44 reference board support
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/pcf857x.h>
-
-#include "machtypes.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "pci.h"
-
-#define PB44_GPIO_I2C_SCL 0
-#define PB44_GPIO_I2C_SDA 1
-
-#define PB44_GPIO_EXP_BASE 16
-#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
-#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
-#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
-#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + 10)
-
-#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */
-#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL)
-
-static struct gpiod_lookup_table pb44_i2c_gpiod_table = {
- .dev_id = "i2c-gpio.0",
- .table = {
- GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SDA,
- NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SCL,
- NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- },
-};
-
-static struct platform_device pb44_i2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = NULL,
- }
-};
-
-static struct pcf857x_platform_data pb44_pcf857x_data = {
- .gpio_base = PB44_GPIO_EXP_BASE,
-};
-
-static struct i2c_board_info pb44_i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("pcf8575", 0x20),
- .platform_data = &pb44_pcf857x_data,
- },
-};
-
-static struct gpio_led pb44_leds_gpio[] __initdata = {
- {
- .name = "pb44:amber:jump1",
- .gpio = PB44_GPIO_LED_JUMP1,
- .active_low = 1,
- }, {
- .name = "pb44:green:jump2",
- .gpio = PB44_GPIO_LED_JUMP2,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button pb44_gpio_keys[] __initdata = {
- {
- .desc = "soft_reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PB44_GPIO_SW_RESET,
- .active_low = 1,
- } , {
- .desc = "jumpstart",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PB44_GPIO_SW_JUMP,
- .active_low = 1,
- }
-};
-
-static struct spi_board_info pb44_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
- },
-};
-
-static struct ath79_spi_platform_data pb44_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-static void __init pb44_init(void)
-{
- gpiod_add_lookup_table(&pb44_i2c_gpiod_table);
- i2c_register_board_info(0, pb44_i2c_board_info,
- ARRAY_SIZE(pb44_i2c_board_info));
- platform_device_register(&pb44_i2c_gpio_device);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio),
- pb44_leds_gpio);
- ath79_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(pb44_gpio_keys),
- pb44_gpio_keys);
- ath79_register_spi(&pb44_spi_data, pb44_spi_info,
- ARRAY_SIZE(pb44_spi_info));
- ath79_register_usb();
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
- pb44_init);
deleted file mode 100644
@@ -1,126 +0,0 @@
-/*
- * Ubiquiti Networks XM (rev 1.0) board support
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
- *
- * Derived from: mach-pb44.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/irq.h>
-
-#include "machtypes.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "pci.h"
-
-#define UBNT_XM_GPIO_LED_L1 0
-#define UBNT_XM_GPIO_LED_L2 1
-#define UBNT_XM_GPIO_LED_L3 11
-#define UBNT_XM_GPIO_LED_L4 7
-
-#define UBNT_XM_GPIO_BTN_RESET 12
-
-#define UBNT_XM_KEYS_POLL_INTERVAL 20
-#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
-
-#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
-
-static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
- {
- .name = "ubnt-xm:red:link1",
- .gpio = UBNT_XM_GPIO_LED_L1,
- .active_low = 0,
- }, {
- .name = "ubnt-xm:orange:link2",
- .gpio = UBNT_XM_GPIO_LED_L2,
- .active_low = 0,
- }, {
- .name = "ubnt-xm:green:link3",
- .gpio = UBNT_XM_GPIO_LED_L3,
- .active_low = 0,
- }, {
- .name = "ubnt-xm:green:link4",
- .gpio = UBNT_XM_GPIO_LED_L4,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
- .gpio = UBNT_XM_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct spi_board_info ubnt_xm_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l6405d",
- }
-};
-
-static struct ath79_spi_platform_data ubnt_xm_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-#ifdef CONFIG_PCI
-static struct ath9k_platform_data ubnt_xm_eeprom_data;
-
-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 0:
- dev->dev.platform_data = &ubnt_xm_eeprom_data;
- break;
- }
-
- return 0;
-}
-
-static void __init ubnt_xm_pci_init(void)
-{
- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
- sizeof(ubnt_xm_eeprom_data.eeprom_data));
-
- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
- ath79_register_pci();
-}
-#else
-static inline void ubnt_xm_pci_init(void) {}
-#endif /* CONFIG_PCI */
-
-static void __init ubnt_xm_init(void)
-{
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
- ubnt_xm_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-
- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
- ARRAY_SIZE(ubnt_xm_spi_info));
-
- ubnt_xm_pci_init();
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_XM,
- "UBNT-XM",
- "Ubiquiti Networks XM (rev 1.0) board",
- ubnt_xm_init);
deleted file mode 100644
@@ -1,28 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X machine type definitions
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_MACHTYPE_H
-#define _ATH79_MACHTYPE_H
-
-#include <asm/mips_machine.h>
-
-enum ath79_mach_type {
- ATH79_MACH_GENERIC_OF = -1, /* Device tree board */
- ATH79_MACH_GENERIC = 0,
- ATH79_MACH_AP121, /* Atheros AP121 reference board */
- ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
-};
-
-#endif /* _ATH79_MACHTYPE_H */
@@ -33,7 +33,6 @@
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-common.h"
-#include "machtypes.h"
#define ATH79_SYS_TYPE_LEN 64
@@ -236,25 +235,21 @@ void __init plat_mem_setup(void)
else if (fw_passed_dtb)
__dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb));
- if (mips_machtype != ATH79_MACH_GENERIC_OF) {
- ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
- AR71XX_RESET_SIZE);
- ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
- AR71XX_PLL_SIZE);
- ath79_detect_sys_type();
- ath79_ddr_ctrl_init();
+ ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
+ AR71XX_RESET_SIZE);
+ ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
+ AR71XX_PLL_SIZE);
+ ath79_detect_sys_type();
+ ath79_ddr_ctrl_init();
- detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
-
- /* OF machines should use the reset driver */
- _machine_restart = ath79_restart;
- }
+ detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
+ _machine_restart = ath79_restart;
_machine_halt = ath79_halt;
pm_power_off = ath79_halt;
}
-static void __init ath79_of_plat_time_init(void)
+void __init plat_time_init(void)
{
struct device_node *np;
struct clk *clk;
@@ -284,66 +279,12 @@ static void __init ath79_of_plat_time_init(void)
clk_put(clk);
}
-void __init plat_time_init(void)
-{
- unsigned long cpu_clk_rate;
- unsigned long ahb_clk_rate;
- unsigned long ddr_clk_rate;
- unsigned long ref_clk_rate;
-
- if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) {
- ath79_of_plat_time_init();
- return;
- }
-
- ath79_clocks_init();
-
- cpu_clk_rate = ath79_get_sys_clk_rate("cpu");
- ahb_clk_rate = ath79_get_sys_clk_rate("ahb");
- ddr_clk_rate = ath79_get_sys_clk_rate("ddr");
- ref_clk_rate = ath79_get_sys_clk_rate("ref");
-
- pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz\n",
- cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000,
- ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000,
- ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000,
- ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000);
-
- mips_hpt_frequency = cpu_clk_rate / 2;
-}
-
void __init arch_init_irq(void)
{
irqchip_init();
}
-static int __init ath79_setup(void)
-{
- if (mips_machtype == ATH79_MACH_GENERIC_OF)
- return 0;
-
- ath79_gpio_init();
- ath79_register_uart();
- ath79_register_wdt();
-
- mips_machine_setup();
-
- return 0;
-}
-
-arch_initcall(ath79_setup);
-
void __init device_tree_init(void)
{
unflatten_and_copy_device_tree();
}
-
-MIPS_MACHINE(ATH79_MACH_GENERIC,
- "Generic",
- "Generic AR71XX/AR724X/AR913X based board",
- NULL);
-
-MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
- "DTB",
- "Generic AR71XX/AR724X/AR913X based board (DT)",
- NULL);