diff mbox series

[net-next,3/8] Documentation/bindings: net: ocelot: document the PTP ready IRQ

Message ID 20190701100327.6425-4-antoine.tenart@bootlin.com (mailing list archive)
State Superseded
Headers show
Series net: mscc: PTP Hardware Clock (PHC) support | expand

Commit Message

Antoine Tenart July 1, 2019, 10:03 a.m. UTC 
One additional interrupt needs to be described within the Ocelot device
tree node: the PTP ready one. This patch documents the binding needed to
do so.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
 Documentation/devicetree/bindings/net/mscc-ocelot.txt | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

Comments

Andrew Lunn July 1, 2019, 1:54 p.m. UTC | #1 
On Mon, Jul 01, 2019 at 12:03:22PM +0200, Antoine Tenart wrote:
> One additional interrupt needs to be described within the Ocelot device
> tree node: the PTP ready one. This patch documents the binding needed to
> do so.

Hi Antoine

Same questions/points as for the register bank :-)

	Andrew
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
index 0afadfaa33ee..33bbeb998166 100644
--- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
+++ b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
@@ -17,9 +17,10 @@  Required properties:
   - "ana"
   - "portX" with X from 0 to the number of last port index available on that
     switch
-- interrupts: Should contain the switch interrupts for frame extraction and
-  frame injection
-- interrupt-names: should contain the interrupt names: "xtr", "inj"
+- interrupts: Should contain the switch interrupts for frame extraction,
+  frame injection and PTP ready.
+- interrupt-names: should contain the interrupt names: "xtr", "inj" and
+  "ptp_rdy".
 - ethernet-ports: A container for child nodes representing switch ports.
 
 The ethernet-ports container has the following properties
@@ -63,8 +64,8 @@  Example:
 			    "port2", "port3", "port4", "port5", "port6",
 			    "port7", "port8", "port9", "port10", "qsys",
 			    "ana";
-		interrupts = <21 22>;
-		interrupt-names = "xtr", "inj";
+		interrupts = <18 21 22>;
+		interrupt-names = "ptp_rdy", "xtr", "inj";
 
 		ethernet-ports {
 			#address-cells = <1>;