From patchwork Mon Dec 16 07:44:03 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 11293507 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 874FD930 for ; Mon, 16 Dec 2019 07:44:32 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 50F74206CB for ; Mon, 16 Dec 2019 07:44:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726729AbfLPHoc (ORCPT ); Mon, 16 Dec 2019 02:44:32 -0500 Received: from metis.ext.pengutronix.de ([85.220.165.71]:43361 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726922AbfLPHoU (ORCPT ); Mon, 16 Dec 2019 02:44:20 -0500 Received: from dude.hi.pengutronix.de ([2001:67c:670:100:1d::7]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1igl32-0003MG-3O; Mon, 16 Dec 2019 08:44:08 +0100 Received: from ore by dude.hi.pengutronix.de with local (Exim 4.92) (envelope-from ) id 1igl2z-00007O-U9; Mon, 16 Dec 2019 08:44:05 +0100 From: Oleksij Rempel To: Andrew Lunn , Chris Snook , Florian Fainelli , James Hogan , Jay Cliburn , Mark Rutland , Paul Burton , Ralf Baechle , Rob Herring , Vivien Didelot Cc: Oleksij Rempel , Pengutronix Kernel Team , "David S. Miller" , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-mips@vger.kernel.org, Russell King Subject: [PATCH v5 5/5] net: dsa: add support for Atheros AR9331 built-in switch Date: Mon, 16 Dec 2019 08:44:03 +0100 Message-Id: <20191216074403.313-6-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191216074403.313-1-o.rempel@pengutronix.de> References: <20191216074403.313-1-o.rempel@pengutronix.de> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-mips@vger.kernel.org Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org Provide basic support for Atheros AR9331 built-in switch. So far it works as port multiplexer without any hardware offloading support. Signed-off-by: Oleksij Rempel Reviewed-by: Vivien Didelot Reviewed-by: Andrew Lunn --- drivers/net/dsa/Kconfig | 2 + drivers/net/dsa/Makefile | 1 + drivers/net/dsa/qca/Kconfig | 11 + drivers/net/dsa/qca/Makefile | 2 + drivers/net/dsa/qca/ar9331.c | 817 +++++++++++++++++++++++++++++++++++ 5 files changed, 833 insertions(+) create mode 100644 drivers/net/dsa/qca/Kconfig create mode 100644 drivers/net/dsa/qca/Makefile create mode 100644 drivers/net/dsa/qca/ar9331.c diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index c7667645f04a..cbd74a72d0a1 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -54,6 +54,8 @@ source "drivers/net/dsa/mv88e6xxx/Kconfig" source "drivers/net/dsa/ocelot/Kconfig" +source "drivers/net/dsa/qca/Kconfig" + source "drivers/net/dsa/sja1105/Kconfig" config NET_DSA_QCA8K diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index 9d384a32b3a2..4a943ccc2ca4 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -21,4 +21,5 @@ obj-y += b53/ obj-y += microchip/ obj-y += mv88e6xxx/ obj-y += ocelot/ +obj-y += qca/ obj-y += sja1105/ diff --git a/drivers/net/dsa/qca/Kconfig b/drivers/net/dsa/qca/Kconfig new file mode 100644 index 000000000000..8bdc9adffdba --- /dev/null +++ b/drivers/net/dsa/qca/Kconfig @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only +config NET_DSA_AR9331 + tristate "Qualcomm Atheros AR9331 Ethernet switch support" + depends on NET_DSA + select NET_DSA_TAG_AR9331 + select REGMAP + ---help--- + This enables support for the Qualcomm Atheros AR9331 built-in Ethernet + switch. + + diff --git a/drivers/net/dsa/qca/Makefile b/drivers/net/dsa/qca/Makefile new file mode 100644 index 000000000000..274022319066 --- /dev/null +++ b/drivers/net/dsa/qca/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c new file mode 100644 index 000000000000..7ab8a6649104 --- /dev/null +++ b/drivers/net/dsa/qca/ar9331.c @@ -0,0 +1,817 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2019 Pengutronix, Oleksij Rempel + +#include +#include +#include +#include +#include +#include +#include + +#define AR9331_SW_NAME "ar9331_switch" +#define AR9331_SW_PORTS 6 + +/* dummy reg to change page */ +#define AR9331_SW_REG_PAGE BIT(18) + +/* Global Interrupt */ +#define AR9331_SW_REG_GINT 0x10 +#define AR9331_SW_REG_GINT_MASK 0x14 +#define AR9331_SW_GINT_PHY_INT BIT(2) + +#define AR9331_SW_REG_FLOOD_MASK 0x2c +#define AR9331_SW_FLOOD_MASK_BROAD_TO_CPU BIT(26) + +#define AR9331_SW_REG_GLOBAL_CTRL 0x30 +#define AR9331_SW_GLOBAL_CTRL_MFS_M GENMASK(13, 0) + +#define AR9331_SW_REG_MDIO_CTRL 0x98 +#define AR9331_SW_MDIO_CTRL_BUSY BIT(31) +#define AR9331_SW_MDIO_CTRL_MASTER_EN BIT(30) +#define AR9331_SW_MDIO_CTRL_CMD_READ BIT(27) +#define AR9331_SW_MDIO_CTRL_PHY_ADDR_M GENMASK(25, 21) +#define AR9331_SW_MDIO_CTRL_REG_ADDR_M GENMASK(20, 16) +#define AR9331_SW_MDIO_CTRL_DATA_M GENMASK(16, 0) + +#define AR9331_SW_REG_PORT_STATUS(_port) (0x100 + (_port) * 0x100) + +/* FLOW_LINK_EN - enable mac flow control config auto-neg with phy. + * If not set, mac can be config by software. + */ +#define AR9331_SW_PORT_STATUS_FLOW_LINK_EN BIT(12) + +/* LINK_EN - If set, MAC is configured from PHY link status. + * If not set, MAC should be configured by software. + */ +#define AR9331_SW_PORT_STATUS_LINK_EN BIT(9) +#define AR9331_SW_PORT_STATUS_DUPLEX_MODE BIT(6) +#define AR9331_SW_PORT_STATUS_RX_FLOW_EN BIT(5) +#define AR9331_SW_PORT_STATUS_TX_FLOW_EN BIT(4) +#define AR9331_SW_PORT_STATUS_RXMAC BIT(3) +#define AR9331_SW_PORT_STATUS_TXMAC BIT(2) +#define AR9331_SW_PORT_STATUS_SPEED_M GENMASK(1, 0) +#define AR9331_SW_PORT_STATUS_SPEED_1000 2 +#define AR9331_SW_PORT_STATUS_SPEED_100 1 +#define AR9331_SW_PORT_STATUS_SPEED_10 0 + +#define AR9331_SW_PORT_STATUS_MAC_MASK \ + (AR9331_SW_PORT_STATUS_TXMAC | AR9331_SW_PORT_STATUS_RXMAC) + +#define AR9331_SW_PORT_STATUS_LINK_MASK \ + (AR9331_SW_PORT_STATUS_LINK_EN | AR9331_SW_PORT_STATUS_FLOW_LINK_EN | \ + AR9331_SW_PORT_STATUS_DUPLEX_MODE | \ + AR9331_SW_PORT_STATUS_RX_FLOW_EN | AR9331_SW_PORT_STATUS_TX_FLOW_EN | \ + AR9331_SW_PORT_STATUS_SPEED_M) + +/* Phy bypass mode + * ------------------------------------------------------------------------ + * Bit: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 | + * + * real | start | OP | PhyAddr | Reg Addr | TA | + * atheros| start | OP | 2'b00 |PhyAdd[2:0]| Reg Addr[4:0] | TA | + * + * + * Bit: |16 |17 |18 |19 |20 |21 |22 |23 |24 |25 |26 |27 |28 |29 |30 |31 | + * real | Data | + * atheros| Data | + * + * ------------------------------------------------------------------------ + * Page address mode + * ------------------------------------------------------------------------ + * Bit: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 | + * real | start | OP | PhyAddr | Reg Addr | TA | + * atheros| start | OP | 2'b11 | 8'b0 | TA | + * + * Bit: |16 |17 |18 |19 |20 |21 |22 |23 |24 |25 |26 |27 |28 |29 |30 |31 | + * real | Data | + * atheros| | Page [9:0] | + */ +/* In case of Page Address mode, Bit[18:9] of 32 bit register address should be + * written to bits[9:0] of mdio data register. + */ +#define AR9331_SW_ADDR_PAGE GENMASK(18, 9) + +/* ------------------------------------------------------------------------ + * Normal register access mode + * ------------------------------------------------------------------------ + * Bit: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 | + * real | start | OP | PhyAddr | Reg Addr | TA | + * atheros| start | OP | 2'b10 | low_addr[7:0] | TA | + * + * Bit: |16 |17 |18 |19 |20 |21 |22 |23 |24 |25 |26 |27 |28 |29 |30 |31 | + * real | Data | + * atheros| Data | + * ------------------------------------------------------------------------ + */ +#define AR9331_SW_LOW_ADDR_PHY GENMASK(8, 6) +#define AR9331_SW_LOW_ADDR_REG GENMASK(5, 1) + +#define AR9331_SW_MDIO_PHY_MODE_M GENMASK(4, 3) +#define AR9331_SW_MDIO_PHY_MODE_PAGE 3 +#define AR9331_SW_MDIO_PHY_MODE_REG 2 +#define AR9331_SW_MDIO_PHY_MODE_BYPASS 0 +#define AR9331_SW_MDIO_PHY_ADDR_M GENMASK(2, 0) + +/* Empirical determined values */ +#define AR9331_SW_MDIO_POLL_SLEEP_US 1 +#define AR9331_SW_MDIO_POLL_TIMEOUT_US 20 + +struct ar9331_sw_priv { + struct device *dev; + struct dsa_switch ds; + struct dsa_switch_ops ops; + struct irq_domain *irqdomain; + struct mii_bus *mbus; /* mdio master */ + struct mii_bus *sbus; /* mdio slave */ + struct regmap *regmap; + struct reset_control *sw_reset; +}; + +/* Warning: switch reset will reset last AR9331_SW_MDIO_PHY_MODE_PAGE request + * If some kind of optimization is used, the request should be repeated. + */ +static int ar9331_sw_reset(struct ar9331_sw_priv *priv) +{ + int ret; + + ret = reset_control_assert(priv->sw_reset); + if (ret) + goto error; + + /* AR9331 doc do not provide any information about proper reset + * sequence. The AR8136 (the closes switch to the AR9331) doc says: + * reset duration should be greater than 10ms. So, let's use this value + * for now. + */ + usleep_range(10000, 15000); + ret = reset_control_deassert(priv->sw_reset); + if (ret) + goto error; + /* There is no information on how long should we wait after reset. + * AR8136 has an EEPROM and there is an Interrupt for EEPROM load + * status. AR9331 has no EEPROM support. + * For now, do not wait. In case AR8136 will be needed, the after + * reset delay can be added as well. + */ + + return 0; +error: + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); + return ret; +} + +static int ar9331_sw_mbus_write(struct mii_bus *mbus, int port, int regnum, + u16 data) +{ + struct ar9331_sw_priv *priv = mbus->priv; + struct regmap *regmap = priv->regmap; + u32 val; + int ret; + + ret = regmap_write(regmap, AR9331_SW_REG_MDIO_CTRL, + AR9331_SW_MDIO_CTRL_BUSY | + AR9331_SW_MDIO_CTRL_MASTER_EN | + FIELD_PREP(AR9331_SW_MDIO_CTRL_PHY_ADDR_M, port) | + FIELD_PREP(AR9331_SW_MDIO_CTRL_REG_ADDR_M, regnum) | + FIELD_PREP(AR9331_SW_MDIO_CTRL_DATA_M, data)); + if (ret) + goto error; + + ret = regmap_read_poll_timeout(regmap, AR9331_SW_REG_MDIO_CTRL, val, + !(val & AR9331_SW_MDIO_CTRL_BUSY), + AR9331_SW_MDIO_POLL_SLEEP_US, + AR9331_SW_MDIO_POLL_TIMEOUT_US); + if (ret) + goto error; + + return 0; +error: + dev_err_ratelimited(priv->dev, "PHY write error: %i\n", ret); + return ret; +} + +static int ar9331_sw_mbus_read(struct mii_bus *mbus, int port, int regnum) +{ + struct ar9331_sw_priv *priv = mbus->priv; + struct regmap *regmap = priv->regmap; + u32 val; + int ret; + + ret = regmap_write(regmap, AR9331_SW_REG_MDIO_CTRL, + AR9331_SW_MDIO_CTRL_BUSY | + AR9331_SW_MDIO_CTRL_MASTER_EN | + AR9331_SW_MDIO_CTRL_CMD_READ | + FIELD_PREP(AR9331_SW_MDIO_CTRL_PHY_ADDR_M, port) | + FIELD_PREP(AR9331_SW_MDIO_CTRL_REG_ADDR_M, regnum)); + if (ret) + goto error; + + ret = regmap_read_poll_timeout(regmap, AR9331_SW_REG_MDIO_CTRL, val, + !(val & AR9331_SW_MDIO_CTRL_BUSY), + AR9331_SW_MDIO_POLL_SLEEP_US, + AR9331_SW_MDIO_POLL_TIMEOUT_US); + if (ret) + goto error; + + ret = regmap_read(regmap, AR9331_SW_REG_MDIO_CTRL, &val); + if (ret) + goto error; + + return FIELD_GET(AR9331_SW_MDIO_CTRL_DATA_M, val); + +error: + dev_err_ratelimited(priv->dev, "PHY read error: %i\n", ret); + return ret; +} + +static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv) +{ + struct device *dev = priv->dev; + static struct mii_bus *mbus; + struct device_node *np, *mnp; + int ret; + + np = dev->of_node; + + mbus = devm_mdiobus_alloc(dev); + if (!mbus) + return -ENOMEM; + + mbus->name = np->full_name; + snprintf(mbus->id, MII_BUS_ID_SIZE, "%pOF", np); + + mbus->read = ar9331_sw_mbus_read; + mbus->write = ar9331_sw_mbus_write; + mbus->priv = priv; + mbus->parent = dev; + + mnp = of_get_child_by_name(np, "mdio"); + if (!mnp) + return -ENODEV; + + ret = of_mdiobus_register(mbus, mnp); + of_node_put(mnp); + if (ret) + return ret; + + priv->mbus = mbus; + + return 0; +} + +static int ar9331_sw_setup(struct dsa_switch *ds) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + int ret; + + ret = ar9331_sw_reset(priv); + if (ret) + return ret; + + /* Reset will set proper defaults. CPU - Port0 will be enabled and + * configured. All other ports (ports 1 - 5) are disabled + */ + ret = ar9331_sw_mbus_init(priv); + if (ret) + return ret; + + /* Do not drop broadcast frames */ + ret = regmap_write_bits(regmap, AR9331_SW_REG_FLOOD_MASK, + AR9331_SW_FLOOD_MASK_BROAD_TO_CPU, + AR9331_SW_FLOOD_MASK_BROAD_TO_CPU); + if (ret) + goto error; + + /* Set max frame size to the maximum supported value */ + ret = regmap_write_bits(regmap, AR9331_SW_REG_GLOBAL_CTRL, + AR9331_SW_GLOBAL_CTRL_MFS_M, + AR9331_SW_GLOBAL_CTRL_MFS_M); + if (ret) + goto error; + + return 0; +error: + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); + return ret; +} + +static void ar9331_sw_port_disable(struct dsa_switch *ds, int port) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + int ret; + + ret = regmap_write(regmap, AR9331_SW_REG_PORT_STATUS(port), 0); + if (ret) + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); +} + +static enum dsa_tag_protocol ar9331_sw_get_tag_protocol(struct dsa_switch *ds, + int port) +{ + return DSA_TAG_PROTO_AR9331; +} + +static void ar9331_sw_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + + switch (port) { + case 0: + if (state->interface != PHY_INTERFACE_MODE_GMII) + goto unsupported; + + phylink_set(mask, 1000baseT_Full); + phylink_set(mask, 1000baseT_Half); + break; + case 1: + case 2: + case 3: + case 4: + case 5: + if (state->interface != PHY_INTERFACE_MODE_INTERNAL) + goto unsupported; + break; + default: + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + dev_err(ds->dev, "Unsupported port: %i\n", port); + return; + } + + phylink_set_port_modes(mask); + phylink_set(mask, Pause); + phylink_set(mask, Asym_Pause); + + phylink_set(mask, 10baseT_Half); + phylink_set(mask, 10baseT_Full); + phylink_set(mask, 100baseT_Half); + phylink_set(mask, 100baseT_Full); + + bitmap_and(supported, supported, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); + bitmap_and(state->advertising, state->advertising, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); + + return; + +unsupported: + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + dev_err(ds->dev, "Unsupported interface: %d, port: %d\n", + state->interface, port); +} + +static void ar9331_sw_phylink_mac_config(struct dsa_switch *ds, int port, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + int ret; + u32 val; + + switch (state->speed) { + case SPEED_1000: + val = AR9331_SW_PORT_STATUS_SPEED_1000; + break; + case SPEED_100: + val = AR9331_SW_PORT_STATUS_SPEED_100; + break; + case SPEED_10: + val = AR9331_SW_PORT_STATUS_SPEED_10; + break; + default: + return; + } + + if (state->duplex) + val |= AR9331_SW_PORT_STATUS_DUPLEX_MODE; + + if (state->pause & MLO_PAUSE_TX) + val |= AR9331_SW_PORT_STATUS_TX_FLOW_EN; + + if (state->pause & MLO_PAUSE_RX) + val |= AR9331_SW_PORT_STATUS_RX_FLOW_EN; + + ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port), + AR9331_SW_PORT_STATUS_LINK_MASK, val); + if (ret) + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); +} + +static void ar9331_sw_phylink_mac_link_down(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + int ret; + + ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port), + AR9331_SW_PORT_STATUS_MAC_MASK, 0); + if (ret) + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); +} + +static void ar9331_sw_phylink_mac_link_up(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface, + struct phy_device *phydev) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + int ret; + + ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port), + AR9331_SW_PORT_STATUS_MAC_MASK, + AR9331_SW_PORT_STATUS_MAC_MASK); + if (ret) + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); +} + +static const struct dsa_switch_ops ar9331_sw_ops = { + .get_tag_protocol = ar9331_sw_get_tag_protocol, + .setup = ar9331_sw_setup, + .port_disable = ar9331_sw_port_disable, + .phylink_validate = ar9331_sw_phylink_validate, + .phylink_mac_config = ar9331_sw_phylink_mac_config, + .phylink_mac_link_down = ar9331_sw_phylink_mac_link_down, + .phylink_mac_link_up = ar9331_sw_phylink_mac_link_up, +}; + +static irqreturn_t ar9331_sw_irq(int irq, void *data) +{ + struct ar9331_sw_priv *priv = data; + struct regmap *regmap = priv->regmap; + u32 stat; + int ret; + + ret = regmap_read(regmap, AR9331_SW_REG_GINT, &stat); + if (ret) { + dev_err(priv->dev, "can't read interrupt status\n"); + return IRQ_NONE; + } + + if (!stat) + return IRQ_NONE; + + if (stat & AR9331_SW_GINT_PHY_INT) { + int child_irq; + + child_irq = irq_find_mapping(priv->irqdomain, 0); + handle_nested_irq(child_irq); + } + + ret = regmap_write(regmap, AR9331_SW_REG_GINT, stat); + if (ret) { + dev_err(priv->dev, "can't write interrupt status\n"); + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +static void ar9331_sw_mask_irq(struct irq_data *d) +{ + struct ar9331_sw_priv *priv = irq_data_get_irq_chip_data(d); + struct regmap *regmap = priv->regmap; + int ret; + + ret = regmap_update_bits(regmap, AR9331_SW_REG_GINT_MASK, + AR9331_SW_GINT_PHY_INT, 0); + if (ret) + dev_err(priv->dev, "could not mask IRQ\n"); +} + +static void ar9331_sw_unmask_irq(struct irq_data *d) +{ + struct ar9331_sw_priv *priv = irq_data_get_irq_chip_data(d); + struct regmap *regmap = priv->regmap; + int ret; + + ret = regmap_update_bits(regmap, AR9331_SW_REG_GINT_MASK, + AR9331_SW_GINT_PHY_INT, + AR9331_SW_GINT_PHY_INT); + if (ret) + dev_err(priv->dev, "could not unmask IRQ\n"); +} + +static struct irq_chip ar9331_sw_irq_chip = { + .name = AR9331_SW_NAME, + .irq_mask = ar9331_sw_mask_irq, + .irq_unmask = ar9331_sw_unmask_irq, +}; + +static int ar9331_sw_irq_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(irq, domain->host_data); + irq_set_chip_and_handler(irq, &ar9331_sw_irq_chip, handle_simple_irq); + irq_set_nested_thread(irq, 1); + irq_set_noprobe(irq); + + return 0; +} + +static void ar9331_sw_irq_unmap(struct irq_domain *d, unsigned int irq) +{ + irq_set_nested_thread(irq, 0); + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); +} + +static const struct irq_domain_ops ar9331_sw_irqdomain_ops = { + .map = ar9331_sw_irq_map, + .unmap = ar9331_sw_irq_unmap, + .xlate = irq_domain_xlate_onecell, +}; + +static int ar9331_sw_irq_init(struct ar9331_sw_priv *priv) +{ + struct device_node *np = priv->dev->of_node; + struct device *dev = priv->dev; + int ret, irq; + + irq = of_irq_get(np, 0); + if (irq <= 0) { + dev_err(dev, "failed to get parent IRQ\n"); + return irq ? irq : -EINVAL; + } + + ret = devm_request_threaded_irq(dev, irq, NULL, ar9331_sw_irq, + IRQF_ONESHOT, AR9331_SW_NAME, priv); + if (ret) { + dev_err(dev, "unable to request irq: %d\n", ret); + return ret; + } + + priv->irqdomain = irq_domain_add_linear(np, 1, &ar9331_sw_irqdomain_ops, + priv); + if (!priv->irqdomain) { + dev_err(dev, "failed to create IRQ domain\n"); + return -EINVAL; + } + + irq_set_parent(irq_create_mapping(priv->irqdomain, 0), irq); + + return 0; +} + +static int __ar9331_mdio_write(struct mii_bus *sbus, u8 mode, u16 reg, u16 val) +{ + u8 r, p; + + p = FIELD_PREP(AR9331_SW_MDIO_PHY_MODE_M, mode) | + FIELD_GET(AR9331_SW_LOW_ADDR_PHY, reg); + r = FIELD_GET(AR9331_SW_LOW_ADDR_REG, reg); + + return mdiobus_write(sbus, p, r, val); +} + +static int __ar9331_mdio_read(struct mii_bus *sbus, u16 reg) +{ + u8 r, p; + + p = FIELD_PREP(AR9331_SW_MDIO_PHY_MODE_M, AR9331_SW_MDIO_PHY_MODE_REG) | + FIELD_GET(AR9331_SW_LOW_ADDR_PHY, reg); + r = FIELD_GET(AR9331_SW_LOW_ADDR_REG, reg); + + return mdiobus_read(sbus, p, r); +} + +static int ar9331_mdio_read(void *ctx, const void *reg_buf, size_t reg_len, + void *val_buf, size_t val_len) +{ + struct ar9331_sw_priv *priv = ctx; + struct mii_bus *sbus = priv->sbus; + u32 reg = *(u32 *)reg_buf; + int ret; + + if (reg == AR9331_SW_REG_PAGE) { + /* We cannot read the page selector register from hardware and + * we cache its value in regmap. Return all bits set here, + * that regmap will always write the page on first use. + */ + *(u32 *)val_buf = GENMASK(9, 0); + return 0; + } + + ret = __ar9331_mdio_read(sbus, reg); + if (ret < 0) + goto error; + + *(u32 *)val_buf = ret; + ret = __ar9331_mdio_read(sbus, reg + 2); + if (ret < 0) + goto error; + + *(u32 *)val_buf |= ret << 16; + + return 0; +error: + dev_err_ratelimited(&sbus->dev, "Bus error. Failed to read register.\n"); + return ret; +} + +static int ar9331_mdio_write(void *ctx, u32 reg, u32 val) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ctx; + struct mii_bus *sbus = priv->sbus; + int ret; + + if (reg == AR9331_SW_REG_PAGE) { + ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_PAGE, + 0, val); + if (ret < 0) + goto error; + + return 0; + } + + ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg, val); + if (ret < 0) + goto error; + + ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg + 2, + val >> 16); + if (ret < 0) + goto error; + + return 0; +error: + dev_err_ratelimited(&sbus->dev, "Bus error. Failed to write register.\n"); + return ret; +} + +static int ar9331_sw_bus_write(void *context, const void *data, size_t count) +{ + u32 reg = *(u32 *)data; + u32 val = *((u32 *)data + 1); + + return ar9331_mdio_write(context, reg, val); +} + +static const struct regmap_range ar9331_valid_regs[] = { + regmap_reg_range(0x0, 0x0), + regmap_reg_range(0x10, 0x14), + regmap_reg_range(0x20, 0x24), + regmap_reg_range(0x2c, 0x30), + regmap_reg_range(0x40, 0x44), + regmap_reg_range(0x50, 0x78), + regmap_reg_range(0x80, 0x98), + + regmap_reg_range(0x100, 0x120), + regmap_reg_range(0x200, 0x220), + regmap_reg_range(0x300, 0x320), + regmap_reg_range(0x400, 0x420), + regmap_reg_range(0x500, 0x520), + regmap_reg_range(0x600, 0x620), + + regmap_reg_range(0x20000, 0x200a4), + regmap_reg_range(0x20100, 0x201a4), + regmap_reg_range(0x20200, 0x202a4), + regmap_reg_range(0x20300, 0x203a4), + regmap_reg_range(0x20400, 0x204a4), + regmap_reg_range(0x20500, 0x205a4), + + /* dummy page selector reg */ + regmap_reg_range(AR9331_SW_REG_PAGE, AR9331_SW_REG_PAGE), +}; + +static const struct regmap_range ar9331_nonvolatile_regs[] = { + regmap_reg_range(AR9331_SW_REG_PAGE, AR9331_SW_REG_PAGE), +}; + +static const struct regmap_range_cfg ar9331_regmap_range[] = { + { + .selector_reg = AR9331_SW_REG_PAGE, + .selector_mask = GENMASK(9, 0), + .selector_shift = 0, + + .window_start = 0, + .window_len = 512, + + .range_min = 0, + .range_max = AR9331_SW_REG_PAGE - 4, + }, +}; + +static const struct regmap_access_table ar9331_register_set = { + .yes_ranges = ar9331_valid_regs, + .n_yes_ranges = ARRAY_SIZE(ar9331_valid_regs), +}; + +static const struct regmap_access_table ar9331_volatile_set = { + .no_ranges = ar9331_nonvolatile_regs, + .n_no_ranges = ARRAY_SIZE(ar9331_nonvolatile_regs), +}; + +static const struct regmap_config ar9331_mdio_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = AR9331_SW_REG_PAGE, + + .ranges = ar9331_regmap_range, + .num_ranges = ARRAY_SIZE(ar9331_regmap_range), + + .volatile_table = &ar9331_volatile_set, + .wr_table = &ar9331_register_set, + .rd_table = &ar9331_register_set, + + .cache_type = REGCACHE_RBTREE, +}; + +static struct regmap_bus ar9331_sw_bus = { + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, + .read = ar9331_mdio_read, + .write = ar9331_sw_bus_write, + .max_raw_read = 4, + .max_raw_write = 4, +}; + +static int ar9331_sw_probe(struct mdio_device *mdiodev) +{ + struct ar9331_sw_priv *priv; + struct dsa_switch *ds; + int ret; + + priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = devm_regmap_init(&mdiodev->dev, &ar9331_sw_bus, priv, + &ar9331_mdio_regmap_config); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + dev_err(&mdiodev->dev, "regmap init failed: %d\n", ret); + return ret; + } + + priv->sw_reset = devm_reset_control_get(&mdiodev->dev, "switch"); + if (IS_ERR(priv->sw_reset)) { + dev_err(&mdiodev->dev, "missing switch reset\n"); + return PTR_ERR(priv->sw_reset); + } + + priv->sbus = mdiodev->bus; + priv->dev = &mdiodev->dev; + + ret = ar9331_sw_irq_init(priv); + if (ret) + return ret; + + ds = &priv->ds; + ds->dev = &mdiodev->dev; + ds->num_ports = AR9331_SW_PORTS; + ds->priv = priv; + priv->ops = ar9331_sw_ops; + ds->ops = &priv->ops; + dev_set_drvdata(&mdiodev->dev, priv); + + ret = dsa_register_switch(ds); + if (ret) + goto err_remove_irq; + + return 0; + +err_remove_irq: + irq_domain_remove(priv->irqdomain); + + return ret; +} + +static void ar9331_sw_remove(struct mdio_device *mdiodev) +{ + struct ar9331_sw_priv *priv = dev_get_drvdata(&mdiodev->dev); + + irq_domain_remove(priv->irqdomain); + mdiobus_unregister(priv->mbus); + dsa_unregister_switch(&priv->ds); + + reset_control_assert(priv->sw_reset); +} + +static const struct of_device_id ar9331_sw_of_match[] = { + { .compatible = "qca,ar9331-switch" }, + { }, +}; + +static struct mdio_driver ar9331_sw_mdio_driver = { + .probe = ar9331_sw_probe, + .remove = ar9331_sw_remove, + .mdiodrv.driver = { + .name = AR9331_SW_NAME, + .of_match_table = ar9331_sw_of_match, + }, +}; + +mdio_module_driver(ar9331_sw_mdio_driver); + +MODULE_AUTHOR("Oleksij Rempel "); +MODULE_DESCRIPTION("Driver for Atheros AR9331 switch"); +MODULE_LICENSE("GPL v2");