From patchwork Sun Apr 26 18:58:53 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Cercueil X-Patchwork-Id: 11510951 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 918DE15AB for ; Sun, 26 Apr 2020 18:59:45 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 6ED0C2080C for ; Sun, 26 Apr 2020 18:59:45 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=crapouillou.net header.i=@crapouillou.net header.b="O5EufCZr" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726431AbgDZS7m (ORCPT ); Sun, 26 Apr 2020 14:59:42 -0400 Received: from outils.crapouillou.net ([89.234.176.41]:58992 "EHLO crapouillou.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726004AbgDZS7l (ORCPT ); Sun, 26 Apr 2020 14:59:41 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=crapouillou.net; s=mail; t=1587927549; h=from:from:sender:reply-to:subject:subject:date:date: message-id:message-id:to:to:cc:cc:mime-version:mime-version: content-type:content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=qcPYXBQWWEakfdDh0+58PZ8fYrMYUkgAapK6RXkbctg=; b=O5EufCZryTGF4MtIFGJnDH4Mq090BQri4cjf70EXas0dqO1V+jk5ebrVn/Tc98QgjA/7kP QNNugGlXrL++xGPXbEfqI+zVcoZXhfH746DfYVdXd5E94vzE80+M5Q5yQ1svT/st6FQwkr Akn6f2K1aBaB/4VI/4HDLqh3gOzZx3o= From: Paul Cercueil To: Rob Herring Cc: od@zcrc.me, =?utf-8?b?5ZGo55Cw5p2w?= , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-i2c@vger.kernel.org, linux-mtd@lists.infradead.org, linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org, linux-mips@vger.kernel.org, Paul Cercueil Subject: [PATCH 5/8] dt-bindings: mtd: Convert ingenic,jz4780-nand.txt to YAML Date: Sun, 26 Apr 2020 20:58:53 +0200 Message-Id: <20200426185856.38826-5-paul@crapouillou.net> In-Reply-To: <20200426185856.38826-1-paul@crapouillou.net> References: <20200426185856.38826-1-paul@crapouillou.net> MIME-Version: 1.0 Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org Convert the ingenic,jz4780-nand.txt doc file to ingenic,nand.yaml. Signed-off-by: Paul Cercueil --- .../bindings/mtd/ingenic,jz4780-nand.txt | 92 ------------ .../devicetree/bindings/mtd/ingenic,nand.yaml | 133 ++++++++++++++++++ 2 files changed, 133 insertions(+), 92 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt create mode 100644 Documentation/devicetree/bindings/mtd/ingenic,nand.yaml diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt deleted file mode 100644 index c02259353327..000000000000 --- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt +++ /dev/null @@ -1,92 +0,0 @@ -* Ingenic JZ4780 NAND/ECC - -This file documents the device tree bindings for NAND flash devices on the -JZ4780. NAND devices are connected to the NEMC controller (described in -memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must -be children of the NEMC node. - -Required NAND controller device properties: -- compatible: Should be one of: - * ingenic,jz4740-nand - * ingenic,jz4725b-nand - * ingenic,jz4780-nand -- reg: For each bank with a NAND chip attached, should specify a bank number, - an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank). - -Optional NAND controller device properties: -- ecc-engine: To make use of the hardware ECC controller, this - property must contain a phandle for the ECC controller node. The required - properties for this node are described below. If this is not specified, - software ECC will be used instead. - -Optional children nodes: -- Individual NAND chips are children of the NAND controller node. - -Required children node properties: -- reg: An integer ranging from 1 to 6 representing the CS line to use. - -Optional children node properties: -- nand-ecc-step-size: ECC block size in bytes. -- nand-ecc-strength: ECC strength (max number of correctable bits). -- nand-ecc-mode: String, operation mode of the NAND ecc mode. "hw" by default -- nand-on-flash-bbt: boolean to enable on flash bbt option, if not present false -- rb-gpios: GPIO specifier for the busy pin. -- wp-gpios: GPIO specifier for the write protect pin. - -Optional child node of NAND chip nodes: -- partitions: see Documentation/devicetree/bindings/mtd/partition.txt - -Example: - -nemc: nemc@13410000 { - ... - - nandc: nand-controller@1 { - compatible = "ingenic,jz4780-nand"; - reg = <1 0 0x1000000>; /* Bank 1 */ - - #address-cells = <1>; - #size-cells = <0>; - - ecc-engine = <&bch>; - - nand@1 { - reg = <1>; - - nand-ecc-step-size = <1024>; - nand-ecc-strength = <24>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - - rb-gpios = <&gpa 20 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpf 22 GPIO_ACTIVE_LOW>; - - partitions { - #address-cells = <2>; - #size-cells = <2>; - ... - } - }; - }; -}; - -The ECC controller is a separate SoC component used for error correction on -NAND devices. The following is a description of the device properties for a -ECC controller. - -Required ECC properties: -- compatible: Should be one of: - * ingenic,jz4740-ecc - * ingenic,jz4725b-bch - * ingenic,jz4780-bch -- reg: Should specify the ECC controller registers location and length. -- clocks: Clock for the ECC controller. - -Example: - -bch: bch@134d0000 { - compatible = "ingenic,jz4780-bch"; - reg = <0x134d0000 0x10000>; - - clocks = <&cgu JZ4780_CLK_BCH>; -}; diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml new file mode 100644 index 000000000000..0e4cb1b55385 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ingenic,nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs NAND controller devicetree bindings + +maintainers: + - Paul Cercueil + +allOf: + - $ref: ../memory-controllers/ingenic,nemc-client.yaml# + - $ref: nand-controller.yaml# + +properties: + compatible: + enum: + - ingenic,jz4740-nand + - ingenic,jz4725b-nand + - ingenic,jz4780-nand + + reg: + items: + - description: Bank number, offset and size of first attached NAND chip + - description: Bank number, offset and size of second attached NAND chip + - description: Bank number, offset and size of third attached NAND chip + - description: Bank number, offset and size of fourth attached NAND chip + minItems: 1 + + ecc-engine: true + +patternProperties: + "^nand@[a-f0-9]$": + type: object + properties: + rb-gpios: + description: GPIO specifier for the busy pin. + maxItems: 1 + + wp-gpios: + description: GPIO specifier for the write-protect pin. + maxItems: 1 + + "^partitions$": + type: object + description: + Node containing description of fixed partitions. + See Documentation/devicetree/bindings/mtd/partition.txt + +required: + - compatible + - reg + +examples: + - | + #include + nemc: memory-controller@13410000 { + compatible = "ingenic,jz4780-nemc"; + reg = <0x13410000 0x10000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0 0x1b000000 0x1000000>, + <2 0 0x1a000000 0x1000000>, + <3 0 0x19000000 0x1000000>, + <4 0 0x18000000 0x1000000>, + <5 0 0x17000000 0x1000000>, + <6 0 0x16000000 0x1000000>; + + clocks = <&cgu JZ4780_CLK_NEMC>; + + nand-controller@1 { + compatible = "ingenic,jz4780-nand"; + reg = <1 0 0x1000000>; + + #address-cells = <1>; + #size-cells = <0>; + + ecc-engine = <&bch>; + + ingenic,nemc-tAS = <10>; + ingenic,nemc-tAH = <5>; + ingenic,nemc-tBP = <10>; + ingenic,nemc-tAW = <15>; + ingenic,nemc-tSTRV = <100>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc>; + + nand@1 { + reg = <1>; + + nand-ecc-step-size = <1024>; + nand-ecc-strength = <24>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc_cs1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <2>; + #size-cells = <2>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x0 0x0 0x800000>; + }; + + partition@800000 { + label = "u-boot"; + reg = <0x0 0x800000 0x0 0x200000>; + }; + + partition@a00000 { + label = "u-boot-env"; + reg = <0x0 0xa00000 0x0 0x200000>; + }; + + partition@c00000 { + label = "boot"; + reg = <0x0 0xc00000 0x0 0x4000000>; + }; + + partition@4c00000 { + label = "system"; + reg = <0x0 0x4c00000 0x1 0xfb400000>; + }; + }; + }; + }; + };