deleted file mode 100644
@@ -1,87 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * HEART IRQ defines
- *
- * Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de>
- * 2014-2016 Joshua Kinard <kumba@gentoo.org>
- *
- */
-
-#ifndef __ASM_MACH_IP30_IRQ_H
-#define __ASM_MACH_IP30_IRQ_H
-
-/*
- * HEART has 64 hardware interrupts, but use 128 to leave room for a few
- * software interrupts as well (such as the CPU timer interrupt.
- */
-#define NR_IRQS 128
-
-extern void __init ip30_install_ipi(void);
-
-/*
- * HEART has 64 interrupt vectors available to it, subdivided into five
- * priority levels. They are numbered 0 to 63.
- */
-#define HEART_NUM_IRQS 64
-
-/*
- * These are the five interrupt priority levels and their corresponding
- * CPU IPx interrupt pins.
- *
- * Level 4 - Error Interrupts.
- * Level 3 - HEART timer interrupt.
- * Level 2 - CPU IPI, CPU debug, power putton, general device interrupts.
- * Level 1 - General device interrupts.
- * Level 0 - General device GFX flow control interrupts.
- */
-#define HEART_L4_INT_MASK 0xfff8000000000000ULL /* IP6 */
-#define HEART_L3_INT_MASK 0x0004000000000000ULL /* IP5 */
-#define HEART_L2_INT_MASK 0x0003ffff00000000ULL /* IP4 */
-#define HEART_L1_INT_MASK 0x00000000ffff0000ULL /* IP3 */
-#define HEART_L0_INT_MASK 0x000000000000ffffULL /* IP2 */
-
-/* HEART L0 Interrupts (Low Priority) */
-#define HEART_L0_INT_GENERIC 0
-#define HEART_L0_INT_FLOW_CTRL_HWTR_0 1
-#define HEART_L0_INT_FLOW_CTRL_HWTR_1 2
-
-/* HEART L2 Interrupts (High Priority) */
-#define HEART_L2_INT_RESCHED_CPU_0 46
-#define HEART_L2_INT_RESCHED_CPU_1 47
-#define HEART_L2_INT_CALL_CPU_0 48
-#define HEART_L2_INT_CALL_CPU_1 49
-
-/* HEART L3 Interrupts (Compare/Counter Timer) */
-#define HEART_L3_INT_TIMER 50
-
-/* HEART L4 Interrupts (Errors) */
-#define HEART_L4_INT_XWID_ERR_9 51
-#define HEART_L4_INT_XWID_ERR_A 52
-#define HEART_L4_INT_XWID_ERR_B 53
-#define HEART_L4_INT_XWID_ERR_C 54
-#define HEART_L4_INT_XWID_ERR_D 55
-#define HEART_L4_INT_XWID_ERR_E 56
-#define HEART_L4_INT_XWID_ERR_F 57
-#define HEART_L4_INT_XWID_ERR_XBOW 58
-#define HEART_L4_INT_CPU_BUS_ERR_0 59
-#define HEART_L4_INT_CPU_BUS_ERR_1 60
-#define HEART_L4_INT_CPU_BUS_ERR_2 61
-#define HEART_L4_INT_CPU_BUS_ERR_3 62
-#define HEART_L4_INT_HEART_EXCP 63
-
-/*
- * Power Switch is wired via BaseIO BRIDGE slot #6.
- *
- * ACFail is wired via BaseIO BRIDGE slot #7.
- */
-#define IP30_POWER_IRQ HEART_L2_INT_POWER_BTN
-
-#include <asm/mach-generic/irq.h>
-
-#define IP30_HEART_L0_IRQ (MIPS_CPU_IRQ_BASE + 2)
-#define IP30_HEART_L1_IRQ (MIPS_CPU_IRQ_BASE + 3)
-#define IP30_HEART_L2_IRQ (MIPS_CPU_IRQ_BASE + 4)
-#define IP30_HEART_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 5)
-#define IP30_HEART_ERR_IRQ (MIPS_CPU_IRQ_BASE + 6)
-
-#endif /* __ASM_MACH_IP30_IRQ_H */
@@ -264,6 +264,57 @@ struct ip30_heart_regs { /* 0x0ff00000 */
#define HC_NCOR_MEM_ERR BIT(1)
#define HC_COR_MEM_ERR BIT(0)
+/*
+ * HEART has 64 interrupt vectors available to it, subdivided into five
+ * priority levels. They are numbered 0 to 63.
+ */
+#define HEART_NUM_IRQS 64
+
+/*
+ * These are the five interrupt priority levels and their corresponding
+ * CPU IPx interrupt pins.
+ *
+ * Level 4 - Error Interrupts.
+ * Level 3 - HEART timer interrupt.
+ * Level 2 - CPU IPI, CPU debug, power putton, general device interrupts.
+ * Level 1 - General device interrupts.
+ * Level 0 - General device GFX flow control interrupts.
+ */
+#define HEART_L4_INT_MASK 0xfff8000000000000ULL /* IP6 */
+#define HEART_L3_INT_MASK 0x0004000000000000ULL /* IP5 */
+#define HEART_L2_INT_MASK 0x0003ffff00000000ULL /* IP4 */
+#define HEART_L1_INT_MASK 0x00000000ffff0000ULL /* IP3 */
+#define HEART_L0_INT_MASK 0x000000000000ffffULL /* IP2 */
+
+/* HEART L0 Interrupts (Low Priority) */
+#define HEART_L0_INT_GENERIC 0
+#define HEART_L0_INT_FLOW_CTRL_HWTR_0 1
+#define HEART_L0_INT_FLOW_CTRL_HWTR_1 2
+
+/* HEART L2 Interrupts (High Priority) */
+#define HEART_L2_INT_RESCHED_CPU_0 46
+#define HEART_L2_INT_RESCHED_CPU_1 47
+#define HEART_L2_INT_CALL_CPU_0 48
+#define HEART_L2_INT_CALL_CPU_1 49
+
+/* HEART L3 Interrupts (Compare/Counter Timer) */
+#define HEART_L3_INT_TIMER 50
+
+/* HEART L4 Interrupts (Errors) */
+#define HEART_L4_INT_XWID_ERR_9 51
+#define HEART_L4_INT_XWID_ERR_A 52
+#define HEART_L4_INT_XWID_ERR_B 53
+#define HEART_L4_INT_XWID_ERR_C 54
+#define HEART_L4_INT_XWID_ERR_D 55
+#define HEART_L4_INT_XWID_ERR_E 56
+#define HEART_L4_INT_XWID_ERR_F 57
+#define HEART_L4_INT_XWID_ERR_XBOW 58
+#define HEART_L4_INT_CPU_BUS_ERR_0 59
+#define HEART_L4_INT_CPU_BUS_ERR_1 60
+#define HEART_L4_INT_CPU_BUS_ERR_2 61
+#define HEART_L4_INT_CPU_BUS_ERR_3 62
+#define HEART_L4_INT_HEART_EXCP 63
+
extern struct ip30_heart_regs __iomem *heart_regs;
#define heart_read ____raw_readq
@@ -3,6 +3,20 @@
#ifndef __IP30_COMMON_H
#define __IP30_COMMON_H
+/*
+ * Power Switch is wired via BaseIO BRIDGE slot #6.
+ *
+ * ACFail is wired via BaseIO BRIDGE slot #7.
+ */
+#define IP30_POWER_IRQ HEART_L2_INT_POWER_BTN
+
+#define IP30_HEART_L0_IRQ (MIPS_CPU_IRQ_BASE + 2)
+#define IP30_HEART_L1_IRQ (MIPS_CPU_IRQ_BASE + 3)
+#define IP30_HEART_L2_IRQ (MIPS_CPU_IRQ_BASE + 4)
+#define IP30_HEART_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 5)
+#define IP30_HEART_ERR_IRQ (MIPS_CPU_IRQ_BASE + 6)
+
+extern void __init ip30_install_ipi(void);
extern struct plat_smp_ops ip30_smp_ops;
extern void __init ip30_per_cpu_init(void);
@@ -14,6 +14,8 @@
#include <asm/irq_cpu.h>
#include <asm/sgi/heart.h>
+#include "ip30-common.h"
+
struct heart_irq_data {
u64 *irq_mask;
int cpu;
Move HEART specific parts of mach-ip30/irq.h to asm/sgi/heart.h and IP30 specific parts to sgi-ip30/ip30-common.h. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> --- arch/mips/include/asm/mach-ip30/irq.h | 87 ----------------------------------- arch/mips/include/asm/sgi/heart.h | 51 ++++++++++++++++++++ arch/mips/sgi-ip30/ip30-common.h | 14 ++++++ arch/mips/sgi-ip30/ip30-irq.c | 2 + 4 files changed, 67 insertions(+), 87 deletions(-) delete mode 100644 arch/mips/include/asm/mach-ip30/irq.h