| Message ID | 20201106100849.969240-10-gregory.clement@bootlin.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | MIPS: Add support for more mscc SoCs: Luton, Serval and Jaguar2 | expand |
Hello, > Add a device trees and FIT image support for the Microsemi Jaguar2 SoC > which belongs to same family of the Ocelot SoC. > > It is based on the work of Lars Povlsen <lars.povlsen@microchip.com>. > The i2c device node name are wrongs, I missed it for this submission and will fix it in the next version. For instance i2c_x2sfp_1_a@0 will be named i2c@0. Gregory > Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> > --- > .../devicetree/bindings/mips/mscc.txt | 2 +- > arch/mips/boot/dts/mscc/Makefile | 3 + > arch/mips/boot/dts/mscc/jaguar2.dtsi | 167 +++++++++++ > arch/mips/boot/dts/mscc/jaguar2_common.dtsi | 25 ++ > arch/mips/boot/dts/mscc/jaguar2_pcb110.dts | 273 ++++++++++++++++++ > arch/mips/boot/dts/mscc/jaguar2_pcb111.dts | 109 +++++++ > arch/mips/boot/dts/mscc/jaguar2_pcb118.dts | 59 ++++ > arch/mips/generic/Kconfig | 8 + > arch/mips/generic/Platform | 1 + > arch/mips/generic/board-jaguar2.its.S | 40 +++ > 10 files changed, 686 insertions(+), 1 deletion(-) > create mode 100644 arch/mips/boot/dts/mscc/jaguar2.dtsi > create mode 100644 arch/mips/boot/dts/mscc/jaguar2_common.dtsi > create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts > create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts > create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts > create mode 100644 arch/mips/generic/board-jaguar2.its.S > > diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt > index bdbebb525393..cc916eaeed0a 100644 > --- a/Documentation/devicetree/bindings/mips/mscc.txt > +++ b/Documentation/devicetree/bindings/mips/mscc.txt > @@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following > properties: > > Required properties: > -- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jaguar2" > +- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2" > > > * Other peripherals: > diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile > index 40699b44ed50..befda72ceb26 100644 > --- a/arch/mips/boot/dts/mscc/Makefile > +++ b/arch/mips/boot/dts/mscc/Makefile > @@ -1,5 +1,8 @@ > # SPDX-License-Identifier: GPL-2.0-only > dtb-$(CONFIG_SOC_VCOREIII) += \ > + jaguar2_pcb110.dtb \ > + jaguar2_pcb111.dtb \ > + jaguar2_pcb118.dtb \ > luton_pcb091.dtb \ > ocelot_pcb120.dtb \ > ocelot_pcb123.dtb > diff --git a/arch/mips/boot/dts/mscc/jaguar2.dtsi b/arch/mips/boot/dts/mscc/jaguar2.dtsi > new file mode 100644 > index 000000000000..717018d75a33 > --- /dev/null > +++ b/arch/mips/boot/dts/mscc/jaguar2.dtsi > @@ -0,0 +1,167 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2020 Microsemi Corporation > + */ > + > +/ { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "mscc,jr2"; > + > + aliases { > + serial0 = &uart0; > + serial1 = &uart2; > + gpio0 = &gpio; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu@0 { > + compatible = "mips,mips24KEc"; > + device_type = "cpu"; > + clocks = <&cpu_clk>; > + reg = <0>; > + }; > + }; > + > + cpuintc: interrupt-controller { > + #address-cells = <0>; > + #interrupt-cells = <1>; > + interrupt-controller; > + compatible = "mti,cpu-interrupt-controller"; > + }; > + > + cpu_clk: cpu-clock { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <500000000>; > + }; > + > + ahb_clk: ahb-clk { > + compatible = "fixed-factor-clock"; > + #clock-cells = <0>; > + clocks = <&cpu_clk>; > + clock-div = <2>; > + clock-mult = <1>; > + }; > + > + ahb: ahb@70000000 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + interrupt-parent = <&intc>; > + > + cpu_ctrl: syscon@70000000 { > + compatible = "mscc,ocelot-cpu-syscon", "syscon"; > + reg = <0x70000000 0x2c>; > + }; > + > + intc: interrupt-controller@70000070 { > + compatible = "mscc,jaguar2-icpu-intr"; > + reg = <0x70000070 0x94>; > + #interrupt-cells = <1>; > + interrupt-controller; > + interrupt-parent = <&cpuintc>; > + interrupts = <2>; > + }; > + > + uart0: serial@70100000 { > + pinctrl-0 = <&uart_pins>; > + pinctrl-names = "default"; > + compatible = "ns16550a"; > + reg = <0x70100000 0x20>; > + interrupts = <6>; > + clocks = <&ahb_clk>; > + reg-io-width = <4>; > + reg-shift = <2>; > + > + status = "disabled"; > + }; > + > + uart2: serial@70100800 { > + pinctrl-0 = <&uart2_pins>; > + pinctrl-names = "default"; > + compatible = "ns16550a"; > + reg = <0x70100800 0x20>; > + interrupts = <7>; > + clocks = <&ahb_clk>; > + reg-io-width = <4>; > + reg-shift = <2>; > + > + status = "disabled"; > + }; > + > + gpio: pinctrl@71070038 { > + compatible = "mscc,jaguar2-pinctrl"; > + reg = <0x71010038 0x90>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&gpio 0 0 64>; > + > + uart_pins: uart-pins { > + pins = "GPIO_10", "GPIO_11"; > + function = "uart"; > + }; > + > + uart2_pins: uart2-pins { > + pins = "GPIO_24", "GPIO_25"; > + function = "uart2"; > + }; > + > + cs1_pins: cs1-pins { > + pins = "GPIO_16"; > + function = "si"; > + }; > + > + cs2_pins: cs2-pins { > + pins = "GPIO_17"; > + function = "si"; > + }; > + > + cs3_pins: cs3-pins { > + pins = "GPIO_18"; > + function = "si"; > + }; > + > + i2c_pins: i2c-pins { > + pins = "GPIO_14", "GPIO_15"; > + function = "twi"; > + }; > + > + i2c2_pins: i2c2-pins { > + pins = "GPIO_28", "GPIO_29"; > + function = "twi2"; > + }; > + }; > + > + i2c0: i2c@70100400 { > + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; > + status = "disabled"; > + pinctrl-0 = <&i2c_pins>; > + pinctrl-names = "default"; > + reg = <0x70100400 0x100>, <0x700001b8 0x8>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <8>; > + clock-frequency = <100000>; > + clocks = <&ahb_clk>; > + }; > + > + i2c2: i2c@70100c00 { > + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; > + status = "disabled"; > + pinctrl-0 = <&i2c2_pins>; > + pinctrl-names = "default"; > + reg = <0x70100c00 0x100>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <8>; > + clock-frequency = <100000>; > + clocks = <&ahb_clk>; > + }; > + }; > +}; > diff --git a/arch/mips/boot/dts/mscc/jaguar2_common.dtsi b/arch/mips/boot/dts/mscc/jaguar2_common.dtsi > new file mode 100644 > index 000000000000..679ff0d8eda8 > --- /dev/null > +++ b/arch/mips/boot/dts/mscc/jaguar2_common.dtsi > @@ -0,0 +1,25 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2020 Microsemi Corporation > + */ > + > +#include "jaguar2.dtsi" > + > +/ { > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&i2c0 { > + status = "okay"; > + i2c-sda-hold-time-ns = <300>; > +}; > diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts > new file mode 100644 > index 000000000000..306993ad9b4a > --- /dev/null > +++ b/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts > @@ -0,0 +1,273 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2020 Microsemi Corporation > + */ > + > +/dts-v1/; > +#include "jaguar2_common.dtsi" > +#include <dt-bindings/gpio/gpio.h> > + > +/ { > + model = "Jaguar2 Cu8-Sfp16 PCB110 Reference Board"; > + compatible = "mscc,jr2-pcb110", "mscc,jr2"; > + > + aliases { > + i2c0 = &i2c0; > + i2c108 = &i2c108; > + i2c109 = &i2c109; > + i2c110 = &i2c110; > + i2c111 = &i2c111; > + i2c112 = &i2c112; > + i2c113 = &i2c113; > + i2c114 = &i2c114; > + i2c115 = &i2c115; > + i2c116 = &i2c116; > + i2c117 = &i2c117; > + i2c118 = &i2c118; > + i2c119 = &i2c119; > + i2c120 = &i2c120; > + i2c121 = &i2c121; > + i2c122 = &i2c122; > + i2c123 = &i2c123; > + i2c124 = &i2c124; > + i2c125 = &i2c125; > + i2c126 = &i2c126; > + i2c127 = &i2c127; > + i2c128 = &i2c128; > + i2c129 = &i2c129; > + i2c130 = &i2c130; > + i2c131 = &i2c131; > + i2c149 = &i2c149; > + i2c150 = &i2c150; > + i2c151 = &i2c151; > + i2c152 = &i2c152; > + }; > +}; > + > +&gpio { > + synce_pins: synce-pins { > + // GPIO 16 == SI_nCS1 > + pins = "GPIO_16"; > + function = "si"; > + }; > + synce_builtin_pins: synce-builtin-pins { > + // GPIO 49 == SI_nCS13 > + pins = "GPIO_49"; > + function = "si"; > + }; > +}; > + > +&gpio { > + i2cmux_pins_i: i2cmux-pins-i { > + pins = "GPIO_17", "GPIO_18", "GPIO_20", "GPIO_21"; > + function = "twi_scl_m"; > + output-low; > + }; > + i2cmux_0: i2cmux-0 { > + pins = "GPIO_17"; > + function = "twi_scl_m"; > + output-high; > + }; > + i2cmux_1: i2cmux-1 { > + pins = "GPIO_18"; > + function = "twi_scl_m"; > + output-high; > + }; > + i2cmux_2: i2cmux-2 { > + pins = "GPIO_20"; > + function = "twi_scl_m"; > + output-high; > + }; > + i2cmux_3: i2cmux-3 { > + pins = "GPIO_21"; > + function = "twi_scl_m"; > + output-high; > + }; > +}; > + > +&i2c0 { > + pca9545@70 { > + compatible = "nxp,pca9545"; > + reg = <0x70>; > + #address-cells = <1>; > + #size-cells = <0>; > + i2c-mux-idle-disconnect; > + i2c124: i2c_x2sfp_1_a@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + }; > + i2c125: i2c_x2sfp_1_b@1 { > + /* FMC B */ > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + }; > + i2c126: i2c_x2sfp_1_c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + }; > + i2c127: i2c_x2sfp_1_d@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + }; > + }; > + pca9545@71 { > + compatible = "nxp,pca9545"; > + reg = <0x71>; > + #address-cells = <1>; > + #size-cells = <0>; > + i2c-mux-idle-disconnect; > + i2c128: i2c_x2sfp_1_a@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + }; > + i2c129: i2c_x2sfp_2_b@1 { > + /* FMC B */ > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + }; > + i2c130: i2c_x2sfp_3_c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + }; > + i2c131: i2c_x2sfp_4_d@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + }; > + }; > +}; > + > +&ahb { > + i2c0_emux: i2c0-emux@0 { > + compatible = "i2c-mux-gpio"; > + #address-cells = <1>; > + #size-cells = <0>; > + i2c-parent = <&i2c0>; > + mux-gpios = <&gpio 51 GPIO_ACTIVE_HIGH > + &gpio 52 GPIO_ACTIVE_HIGH > + &gpio 53 GPIO_ACTIVE_HIGH > + &gpio 58 GPIO_ACTIVE_HIGH > + &gpio 59 GPIO_ACTIVE_HIGH>; > + idle-state = <0x0>; > + i2c108: i2c_sfp9@10 { > + reg = <0x10>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c109: i2c_sfp10@11 { > + reg = <0x11>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c110: i2c_sfp11@12 { > + reg = <0x12>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c111: i2c_sfp12@13 { > + reg = <0x13>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c112: i2c_sfp13@14 { > + reg = <0x14>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c113: i2c_sfp14@15 { > + reg = <0x15>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c114: i2c_sfp15@16 { > + reg = <0x16>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c115: i2c_sfp16@17 { > + reg = <0x17>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c116: i2c_sfp17@8 { > + reg = <0x8>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c117: i2c_sfp18@9 { > + reg = <0x9>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c118: i2c_sfp19@a { > + reg = <0xa>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c119: i2c_sfp20@b { > + reg = <0xb>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c120: i2c_sfp21@c { > + reg = <0xc>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c121: i2c_sfp22@d { > + reg = <0xd>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c122: i2c_sfp23@e { > + reg = <0xe>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c123: i2c_sfp24@f { > + reg = <0xf>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > + i2c0_imux: i2c0-imux@0 { > + compatible = "i2c-mux-pinctrl"; > + #address-cells = <1>; > + #size-cells = <0>; > + i2c-parent = <&i2c0>; > + pinctrl-names = > + "i2c149", "i2c150", "i2c151", "i2c152", "idle"; > + pinctrl-0 = <&i2cmux_0>; > + pinctrl-1 = <&i2cmux_1>; > + pinctrl-2 = <&i2cmux_2>; > + pinctrl-3 = <&i2cmux_3>; > + pinctrl-4 = <&i2cmux_pins_i>; > + i2c149: i2c_sfp_plus_a@0 { > + reg = <0x0>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c150: i2c_sfp_plus_b@1 { > + reg = <0x1>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c151: i2c_sfp_plus_c@2 { > + reg = <0x2>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c152: i2c_sfp_plus_d@3 { > + reg = <0x3>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > +}; > diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts > new file mode 100644 > index 000000000000..df159dbb5a6c > --- /dev/null > +++ b/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts > @@ -0,0 +1,109 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2018 Microsemi Corporation > + */ > + > +/dts-v1/; > +#include "jaguar2_common.dtsi" > + > +/ { > + model = "Jaguar2 Cu48 PCB111 Reference Board"; > + compatible = "mscc,jr2-pcb111", "mscc,jr2"; > + > + aliases { > + i2c0 = &i2c0; > + i2c149 = &i2c149; > + i2c150 = &i2c150; > + i2c151 = &i2c151; > + i2c152 = &i2c152; > + i2c203 = &i2c203; > + }; > +}; > + > +&gpio { > + synce_builtin_pins: synce-builtin-pins { > + // GPIO 49 == SI_nCS13 > + pins = "GPIO_49"; > + function = "si"; > + }; > + cpld_pins: cpld-pins { > + // GPIO 50 == SI_nCS14 > + pins = "GPIO_50"; > + function = "si"; > + }; > + cpld_fifo_pins: synce-builtin-pins { > + // GPIO 51 == SI_nCS15 > + pins = "GPIO_51"; > + function = "si"; > + }; > +}; > + > +&gpio { > + i2cmux_pins_i: i2cmux-pins-i { > + pins = "GPIO_17", "GPIO_18"; > + function = "twi_scl_m"; > + output-low; > + }; > + i2cmux_0: i2cmux-0 { > + pins = "GPIO_17"; > + function = "twi_scl_m"; > + output-high; > + }; > + i2cmux_1: i2cmux-1 { > + pins = "GPIO_18"; > + function = "twi_scl_m"; > + output-high; > + }; > + i2cmux_2: i2cmux-2 { > + pins = "GPIO_20"; > + function = "twi_scl_m"; > + output-high; > + }; > + i2cmux_3: i2cmux-3 { > + pins = "GPIO_21"; > + function = "twi_scl_m"; > + output-high; > + }; > +}; > + > +&ahb { > + i2c0_imux: i2c0-imux@0 { > + compatible = "i2c-mux-pinctrl"; > + #address-cells = <1>; > + #size-cells = <0>; > + i2c-parent = <&i2c0>; > + pinctrl-names = > + "i2c149", "i2c150", "i2c151", "i2c152", "i2c203", "idle"; > + pinctrl-0 = <&i2cmux_0>; > + pinctrl-1 = <&i2cmux_1>; > + pinctrl-2 = <&i2cmux_2>; > + pinctrl-3 = <&i2cmux_3>; > + pinctrl-4 = <&i2cmux_pins_i>; // Added by convention for PoE > + pinctrl-5 = <&i2cmux_pins_i>; > + i2c149: i2c_sfp_plus_a@0 { > + reg = <0x0>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c150: i2c_sfp_plus_b@1 { > + reg = <0x1>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c151: i2c_sfp_plus_c@2 { > + reg = <0x2>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c152: i2c_sfp_plus_d@3 { > + reg = <0x3>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c203: i2c_pd69xxx@4 { > + reg = <0x4>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > +}; > diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts > new file mode 100644 > index 000000000000..1b718a7b5ed9 > --- /dev/null > +++ b/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts > @@ -0,0 +1,59 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2018 Microsemi Corporation > + */ > + > +/dts-v1/; > +#include "jaguar2_common.dtsi" > + > +/ { > + model = "Jaguar2/Aquantia PCB118 Reference Board"; > + compatible = "mscc,jr2-pcb118", "mscc,jr2"; > + > + aliases { > + i2c150 = &i2c150; > + i2c151 = &i2c151; > + }; > +}; > + > +&gpio { > + i2cmux_pins_i: i2cmux-pins-i { > + pins = "GPIO_17", "GPIO_16"; > + function = "twi_scl_m"; > + output-low; > + }; > + i2cmux_0: i2cmux-0 { > + pins = "GPIO_17"; > + function = "twi_scl_m"; > + output-high; > + }; > + i2cmux_1: i2cmux-1 { > + pins = "GPIO_16"; > + function = "twi_scl_m"; > + output-high; > + }; > +}; > + > +&ahb { > + i2c0_imux: i2c0-imux@0 { > + compatible = "i2c-mux-pinctrl"; > + #address-cells = <1>; > + #size-cells = <0>; > + i2c-parent = <&i2c0>; > + pinctrl-names = > + "i2c150", "i2c151", "idle"; > + pinctrl-0 = <&i2cmux_0>; > + pinctrl-1 = <&i2cmux_1>; > + pinctrl-2 = <&i2cmux_pins_i>; > + i2c150: i2c_sfp_plus_a@0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + i2c151: i2c_sfp_plus_b@1 { > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > +}; > diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig > index e5a7a1314e71..c7a840b8eaa6 100644 > --- a/arch/mips/generic/Kconfig > +++ b/arch/mips/generic/Kconfig > @@ -86,6 +86,14 @@ config FIT_IMAGE_FDT_LUTON > from Microsemi in the FIT kernel image. > This requires u-boot on the platform. > > +config FIT_IMAGE_FDT_JAGUAR2 > + bool "Include FDT for Microsemi Jaguar2 development platforms" > + select SOC_VCOREIII > + help > + Enable this to include the FDT for the Jaguar2 development platforms > + from Microsemi in the FIT kernel image. > + This requires u-boot on the platform. > + > config BOARD_INGENIC > bool "Support boards based on Ingenic SoCs" > select MACH_INGENIC_GENERIC > diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform > index 4b6905daa39c..3f2055bea596 100644 > --- a/arch/mips/generic/Platform > +++ b/arch/mips/generic/Platform > @@ -21,4 +21,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += board-boston.its.S > its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S > its-$(CONFIG_FIT_IMAGE_FDT_OCELOT) += board-ocelot.its.S > its-$(CONFIG_FIT_IMAGE_FDT_LUTON) += board-luton.its.S > +its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2) += board-jaguar2.its.S > its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.S > diff --git a/arch/mips/generic/board-jaguar2.its.S b/arch/mips/generic/board-jaguar2.its.S > new file mode 100644 > index 000000000000..fb0e589eeff7 > --- /dev/null > +++ b/arch/mips/generic/board-jaguar2.its.S > @@ -0,0 +1,40 @@ > +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ > +/ { > + images { > + fdt@jaguar2_pcb110 { > + description = "MSCC Jaguar2 PCB110 Device Tree"; > + data = /incbin/("boot/dts/mscc/jaguar2_pcb110.dtb"); > + type = "flat_dt"; > + arch = "mips"; > + compression = "none"; > + hash@0 { > + algo = "sha1"; > + }; > + }; > + fdt@jaguar2_pcb111 { > + description = "MSCC Jaguar2 PCB111 Device Tree"; > + data = /incbin/("boot/dts/mscc/jaguar2_pcb111.dtb"); > + type = "flat_dt"; > + arch = "mips"; > + compression = "none"; > + hash@0 { > + algo = "sha1"; > + }; > + }; > + }; > + > + configurations { > + pcb110 { > + description = "Jaguar2 Linux kernel"; > + kernel = "kernel@0"; > + fdt = "fdt@jaguar2_pcb110"; > + ramdisk = "ramdisk"; > + }; > + pcb111 { > + description = "Jaguar2 Linux kernel"; > + kernel = "kernel@0"; > + fdt = "fdt@jaguar2_pcb111"; > + ramdisk = "ramdisk"; > + }; > + }; > +}; > -- > 2.28.0 >
On Fri, Nov 06, 2020 at 11:08:48AM +0100, Gregory CLEMENT wrote: > Add a device trees and FIT image support for the Microsemi Jaguar2 SoC > which belongs to same family of the Ocelot SoC. > > It is based on the work of Lars Povlsen <lars.povlsen@microchip.com>. > > Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> > --- > .../devicetree/bindings/mips/mscc.txt | 2 +- > arch/mips/boot/dts/mscc/Makefile | 3 + > arch/mips/boot/dts/mscc/jaguar2.dtsi | 167 +++++++++++ > arch/mips/boot/dts/mscc/jaguar2_common.dtsi | 25 ++ > arch/mips/boot/dts/mscc/jaguar2_pcb110.dts | 273 ++++++++++++++++++ > arch/mips/boot/dts/mscc/jaguar2_pcb111.dts | 109 +++++++ > arch/mips/boot/dts/mscc/jaguar2_pcb118.dts | 59 ++++ > arch/mips/generic/Kconfig | 8 + > arch/mips/generic/Platform | 1 + > arch/mips/generic/board-jaguar2.its.S | 40 +++ > 10 files changed, 686 insertions(+), 1 deletion(-) > create mode 100644 arch/mips/boot/dts/mscc/jaguar2.dtsi > create mode 100644 arch/mips/boot/dts/mscc/jaguar2_common.dtsi > create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts > create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts > create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts > create mode 100644 arch/mips/generic/board-jaguar2.its.S > > diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt > index bdbebb525393..cc916eaeed0a 100644 > --- a/Documentation/devicetree/bindings/mips/mscc.txt > +++ b/Documentation/devicetree/bindings/mips/mscc.txt > @@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following > properties: > > Required properties: > -- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jaguar2" > +- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2" Goes in patch 2. > > > * Other peripherals:
diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt index bdbebb525393..cc916eaeed0a 100644 --- a/Documentation/devicetree/bindings/mips/mscc.txt +++ b/Documentation/devicetree/bindings/mips/mscc.txt @@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following properties: Required properties: -- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jaguar2" +- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2" * Other peripherals: diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile index 40699b44ed50..befda72ceb26 100644 --- a/arch/mips/boot/dts/mscc/Makefile +++ b/arch/mips/boot/dts/mscc/Makefile @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only dtb-$(CONFIG_SOC_VCOREIII) += \ + jaguar2_pcb110.dtb \ + jaguar2_pcb111.dtb \ + jaguar2_pcb118.dtb \ luton_pcb091.dtb \ ocelot_pcb120.dtb \ ocelot_pcb123.dtb diff --git a/arch/mips/boot/dts/mscc/jaguar2.dtsi b/arch/mips/boot/dts/mscc/jaguar2.dtsi new file mode 100644 index 000000000000..717018d75a33 --- /dev/null +++ b/arch/mips/boot/dts/mscc/jaguar2.dtsi @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mscc,jr2"; + + aliases { + serial0 = &uart0; + serial1 = &uart2; + gpio0 = &gpio; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips24KEc"; + device_type = "cpu"; + clocks = <&cpu_clk>; + reg = <0>; + }; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + cpu_clk: cpu-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&cpu_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + ahb: ahb@70000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-parent = <&intc>; + + cpu_ctrl: syscon@70000000 { + compatible = "mscc,ocelot-cpu-syscon", "syscon"; + reg = <0x70000000 0x2c>; + }; + + intc: interrupt-controller@70000070 { + compatible = "mscc,jaguar2-icpu-intr"; + reg = <0x70000070 0x94>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + uart0: serial@70100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x70100000 0x20>; + interrupts = <6>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + uart2: serial@70100800 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x70100800 0x20>; + interrupts = <7>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + gpio: pinctrl@71070038 { + compatible = "mscc,jaguar2-pinctrl"; + reg = <0x71010038 0x90>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 64>; + + uart_pins: uart-pins { + pins = "GPIO_10", "GPIO_11"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_24", "GPIO_25"; + function = "uart2"; + }; + + cs1_pins: cs1-pins { + pins = "GPIO_16"; + function = "si"; + }; + + cs2_pins: cs2-pins { + pins = "GPIO_17"; + function = "si"; + }; + + cs3_pins: cs3-pins { + pins = "GPIO_18"; + function = "si"; + }; + + i2c_pins: i2c-pins { + pins = "GPIO_14", "GPIO_15"; + function = "twi"; + }; + + i2c2_pins: i2c2-pins { + pins = "GPIO_28", "GPIO_29"; + function = "twi2"; + }; + }; + + i2c0: i2c@70100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + status = "disabled"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x70100400 0x100>, <0x700001b8 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clock-frequency = <100000>; + clocks = <&ahb_clk>; + }; + + i2c2: i2c@70100c00 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + status = "disabled"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + reg = <0x70100c00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clock-frequency = <100000>; + clocks = <&ahb_clk>; + }; + }; +}; diff --git a/arch/mips/boot/dts/mscc/jaguar2_common.dtsi b/arch/mips/boot/dts/mscc/jaguar2_common.dtsi new file mode 100644 index 000000000000..679ff0d8eda8 --- /dev/null +++ b/arch/mips/boot/dts/mscc/jaguar2_common.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +#include "jaguar2.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-sda-hold-time-ns = <300>; +}; diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts new file mode 100644 index 000000000000..306993ad9b4a --- /dev/null +++ b/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts @@ -0,0 +1,273 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +/dts-v1/; +#include "jaguar2_common.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Jaguar2 Cu8-Sfp16 PCB110 Reference Board"; + compatible = "mscc,jr2-pcb110", "mscc,jr2"; + + aliases { + i2c0 = &i2c0; + i2c108 = &i2c108; + i2c109 = &i2c109; + i2c110 = &i2c110; + i2c111 = &i2c111; + i2c112 = &i2c112; + i2c113 = &i2c113; + i2c114 = &i2c114; + i2c115 = &i2c115; + i2c116 = &i2c116; + i2c117 = &i2c117; + i2c118 = &i2c118; + i2c119 = &i2c119; + i2c120 = &i2c120; + i2c121 = &i2c121; + i2c122 = &i2c122; + i2c123 = &i2c123; + i2c124 = &i2c124; + i2c125 = &i2c125; + i2c126 = &i2c126; + i2c127 = &i2c127; + i2c128 = &i2c128; + i2c129 = &i2c129; + i2c130 = &i2c130; + i2c131 = &i2c131; + i2c149 = &i2c149; + i2c150 = &i2c150; + i2c151 = &i2c151; + i2c152 = &i2c152; + }; +}; + +&gpio { + synce_pins: synce-pins { + // GPIO 16 == SI_nCS1 + pins = "GPIO_16"; + function = "si"; + }; + synce_builtin_pins: synce-builtin-pins { + // GPIO 49 == SI_nCS13 + pins = "GPIO_49"; + function = "si"; + }; +}; + +&gpio { + i2cmux_pins_i: i2cmux-pins-i { + pins = "GPIO_17", "GPIO_18", "GPIO_20", "GPIO_21"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0 { + pins = "GPIO_17"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1 { + pins = "GPIO_18"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_2: i2cmux-2 { + pins = "GPIO_20"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_3: i2cmux-3 { + pins = "GPIO_21"; + function = "twi_scl_m"; + output-high; + }; +}; + +&i2c0 { + pca9545@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + i2c124: i2c_x2sfp_1_a@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c125: i2c_x2sfp_1_b@1 { + /* FMC B */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c126: i2c_x2sfp_1_c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c127: i2c_x2sfp_1_d@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + pca9545@71 { + compatible = "nxp,pca9545"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + i2c128: i2c_x2sfp_1_a@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c129: i2c_x2sfp_2_b@1 { + /* FMC B */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c130: i2c_x2sfp_3_c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c131: i2c_x2sfp_4_d@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&ahb { + i2c0_emux: i2c0-emux@0 { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + mux-gpios = <&gpio 51 GPIO_ACTIVE_HIGH + &gpio 52 GPIO_ACTIVE_HIGH + &gpio 53 GPIO_ACTIVE_HIGH + &gpio 58 GPIO_ACTIVE_HIGH + &gpio 59 GPIO_ACTIVE_HIGH>; + idle-state = <0x0>; + i2c108: i2c_sfp9@10 { + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c109: i2c_sfp10@11 { + reg = <0x11>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c110: i2c_sfp11@12 { + reg = <0x12>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c111: i2c_sfp12@13 { + reg = <0x13>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c112: i2c_sfp13@14 { + reg = <0x14>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c113: i2c_sfp14@15 { + reg = <0x15>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c114: i2c_sfp15@16 { + reg = <0x16>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c115: i2c_sfp16@17 { + reg = <0x17>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c116: i2c_sfp17@8 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c117: i2c_sfp18@9 { + reg = <0x9>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c118: i2c_sfp19@a { + reg = <0xa>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c119: i2c_sfp20@b { + reg = <0xb>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c120: i2c_sfp21@c { + reg = <0xc>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c121: i2c_sfp22@d { + reg = <0xd>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c122: i2c_sfp23@e { + reg = <0xe>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c123: i2c_sfp24@f { + reg = <0xf>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + i2c0_imux: i2c0-imux@0 { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + pinctrl-names = + "i2c149", "i2c150", "i2c151", "i2c152", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_2>; + pinctrl-3 = <&i2cmux_3>; + pinctrl-4 = <&i2cmux_pins_i>; + i2c149: i2c_sfp_plus_a@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c150: i2c_sfp_plus_b@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c151: i2c_sfp_plus_c@2 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c152: i2c_sfp_plus_d@3 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts new file mode 100644 index 000000000000..df159dbb5a6c --- /dev/null +++ b/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "jaguar2_common.dtsi" + +/ { + model = "Jaguar2 Cu48 PCB111 Reference Board"; + compatible = "mscc,jr2-pcb111", "mscc,jr2"; + + aliases { + i2c0 = &i2c0; + i2c149 = &i2c149; + i2c150 = &i2c150; + i2c151 = &i2c151; + i2c152 = &i2c152; + i2c203 = &i2c203; + }; +}; + +&gpio { + synce_builtin_pins: synce-builtin-pins { + // GPIO 49 == SI_nCS13 + pins = "GPIO_49"; + function = "si"; + }; + cpld_pins: cpld-pins { + // GPIO 50 == SI_nCS14 + pins = "GPIO_50"; + function = "si"; + }; + cpld_fifo_pins: synce-builtin-pins { + // GPIO 51 == SI_nCS15 + pins = "GPIO_51"; + function = "si"; + }; +}; + +&gpio { + i2cmux_pins_i: i2cmux-pins-i { + pins = "GPIO_17", "GPIO_18"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0 { + pins = "GPIO_17"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1 { + pins = "GPIO_18"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_2: i2cmux-2 { + pins = "GPIO_20"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_3: i2cmux-3 { + pins = "GPIO_21"; + function = "twi_scl_m"; + output-high; + }; +}; + +&ahb { + i2c0_imux: i2c0-imux@0 { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + pinctrl-names = + "i2c149", "i2c150", "i2c151", "i2c152", "i2c203", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_2>; + pinctrl-3 = <&i2cmux_3>; + pinctrl-4 = <&i2cmux_pins_i>; // Added by convention for PoE + pinctrl-5 = <&i2cmux_pins_i>; + i2c149: i2c_sfp_plus_a@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c150: i2c_sfp_plus_b@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c151: i2c_sfp_plus_c@2 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c152: i2c_sfp_plus_d@3 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c203: i2c_pd69xxx@4 { + reg = <0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts new file mode 100644 index 000000000000..1b718a7b5ed9 --- /dev/null +++ b/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "jaguar2_common.dtsi" + +/ { + model = "Jaguar2/Aquantia PCB118 Reference Board"; + compatible = "mscc,jr2-pcb118", "mscc,jr2"; + + aliases { + i2c150 = &i2c150; + i2c151 = &i2c151; + }; +}; + +&gpio { + i2cmux_pins_i: i2cmux-pins-i { + pins = "GPIO_17", "GPIO_16"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0 { + pins = "GPIO_17"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1 { + pins = "GPIO_16"; + function = "twi_scl_m"; + output-high; + }; +}; + +&ahb { + i2c0_imux: i2c0-imux@0 { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + pinctrl-names = + "i2c150", "i2c151", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_pins_i>; + i2c150: i2c_sfp_plus_a@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c151: i2c_sfp_plus_b@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig index e5a7a1314e71..c7a840b8eaa6 100644 --- a/arch/mips/generic/Kconfig +++ b/arch/mips/generic/Kconfig @@ -86,6 +86,14 @@ config FIT_IMAGE_FDT_LUTON from Microsemi in the FIT kernel image. This requires u-boot on the platform. +config FIT_IMAGE_FDT_JAGUAR2 + bool "Include FDT for Microsemi Jaguar2 development platforms" + select SOC_VCOREIII + help + Enable this to include the FDT for the Jaguar2 development platforms + from Microsemi in the FIT kernel image. + This requires u-boot on the platform. + config BOARD_INGENIC bool "Support boards based on Ingenic SoCs" select MACH_INGENIC_GENERIC diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform index 4b6905daa39c..3f2055bea596 100644 --- a/arch/mips/generic/Platform +++ b/arch/mips/generic/Platform @@ -21,4 +21,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += board-boston.its.S its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S its-$(CONFIG_FIT_IMAGE_FDT_OCELOT) += board-ocelot.its.S its-$(CONFIG_FIT_IMAGE_FDT_LUTON) += board-luton.its.S +its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2) += board-jaguar2.its.S its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.S diff --git a/arch/mips/generic/board-jaguar2.its.S b/arch/mips/generic/board-jaguar2.its.S new file mode 100644 index 000000000000..fb0e589eeff7 --- /dev/null +++ b/arch/mips/generic/board-jaguar2.its.S @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/ { + images { + fdt@jaguar2_pcb110 { + description = "MSCC Jaguar2 PCB110 Device Tree"; + data = /incbin/("boot/dts/mscc/jaguar2_pcb110.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + fdt@jaguar2_pcb111 { + description = "MSCC Jaguar2 PCB111 Device Tree"; + data = /incbin/("boot/dts/mscc/jaguar2_pcb111.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + }; + + configurations { + pcb110 { + description = "Jaguar2 Linux kernel"; + kernel = "kernel@0"; + fdt = "fdt@jaguar2_pcb110"; + ramdisk = "ramdisk"; + }; + pcb111 { + description = "Jaguar2 Linux kernel"; + kernel = "kernel@0"; + fdt = "fdt@jaguar2_pcb111"; + ramdisk = "ramdisk"; + }; + }; +};
Add a device trees and FIT image support for the Microsemi Jaguar2 SoC which belongs to same family of the Ocelot SoC. It is based on the work of Lars Povlsen <lars.povlsen@microchip.com>. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> --- .../devicetree/bindings/mips/mscc.txt | 2 +- arch/mips/boot/dts/mscc/Makefile | 3 + arch/mips/boot/dts/mscc/jaguar2.dtsi | 167 +++++++++++ arch/mips/boot/dts/mscc/jaguar2_common.dtsi | 25 ++ arch/mips/boot/dts/mscc/jaguar2_pcb110.dts | 273 ++++++++++++++++++ arch/mips/boot/dts/mscc/jaguar2_pcb111.dts | 109 +++++++ arch/mips/boot/dts/mscc/jaguar2_pcb118.dts | 59 ++++ arch/mips/generic/Kconfig | 8 + arch/mips/generic/Platform | 1 + arch/mips/generic/board-jaguar2.its.S | 40 +++ 10 files changed, 686 insertions(+), 1 deletion(-) create mode 100644 arch/mips/boot/dts/mscc/jaguar2.dtsi create mode 100644 arch/mips/boot/dts/mscc/jaguar2_common.dtsi create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb110.dts create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb111.dts create mode 100644 arch/mips/boot/dts/mscc/jaguar2_pcb118.dts create mode 100644 arch/mips/generic/board-jaguar2.its.S