@@ -78,6 +78,14 @@ config FIT_IMAGE_FDT_OCELOT
from Microsemi in the FIT kernel image.
This requires u-boot on the platform.
+config FIT_IMAGE_FDT_LUTON
+ bool "Include FDT for Microsemi Luton development platforms"
+ select SOC_VCOREIII
+ help
+ Enable this to include the FDT for the Luton development platforms
+ from Microsemi in the FIT kernel image.
+ This requires u-boot on the platform.
+
config BOARD_INGENIC
bool "Support boards based on Ingenic SoCs"
select MACH_INGENIC_GENERIC
@@ -20,4 +20,5 @@ its-y := vmlinux.its.S
its-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += board-boston.its.S
its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S
its-$(CONFIG_FIT_IMAGE_FDT_OCELOT) += board-ocelot.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_LUTON) += board-luton.its.S
its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.S
new file mode 100644
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/ {
+ images {
+ fdt@luton_pcb091 {
+ description = "MSCC Luton PCB091 Device Tree";
+ data = /incbin/("boot/dts/mscc/luton_pcb091.dtb");
+ type = "flat_dt";
+ arch = "mips";
+ compression = "none";
+ hash@0 {
+ algo = "sha1";
+ };
+ };
+ };
+
+ configurations {
+ pcb091 {
+ description = "Luton Linux kernel";
+ kernel = "kernel@0";
+ fdt = "fdt@luton_pcb091";
+ };
+ };
+};
Luton now has already an u-boot port so let's build FIT images. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> --- arch/mips/generic/Kconfig | 8 ++++++++ arch/mips/generic/Platform | 1 + arch/mips/generic/board-luton.its.S | 23 +++++++++++++++++++++++ 3 files changed, 32 insertions(+) create mode 100644 arch/mips/generic/board-luton.its.S