Message ID | 20220311170240.173846-2-cbranchereau@gmail.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Ingenic DRM bridge_atomic_enable proposal | expand |
Hi Christophe, Le ven., mars 11 2022 at 18:02:37 +0100, Christophe Branchereau <cbranchereau@gmail.com> a écrit : > This allows the CRTC to be enabled after panels have slept out, > and before their display is turned on, solving a graphical bug > on the newvision nv3502c > > Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> > --- > drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 19 +++++++++++++------ > 1 file changed, 13 insertions(+), 6 deletions(-) > > diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c > b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c > index dcf44cb00821..51512f41263e 100644 > --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c > +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c > @@ -226,6 +226,18 @@ static int ingenic_drm_update_pixclk(struct > notifier_block *nb, > } > } > > +static void ingenic_drm_bridge_atomic_enable(struct drm_bridge > *bridge, > + struct drm_bridge_state *old_bridge_state) > +{ > + struct ingenic_drm *priv = drm_device_get_priv(bridge->dev); > + > + regmap_write(priv->map, JZ_REG_LCD_STATE, 0); > + > + regmap_update_bits(priv->map, JZ_REG_LCD_CTRL, > + JZ_LCD_CTRL_ENABLE | JZ_LCD_CTRL_DISABLE, > + JZ_LCD_CTRL_ENABLE); > +} > + > static void ingenic_drm_crtc_atomic_enable(struct drm_crtc *crtc, > struct drm_atomic_state *state) > { > @@ -237,17 +249,11 @@ static void > ingenic_drm_crtc_atomic_enable(struct drm_crtc *crtc, > if (WARN_ON(IS_ERR(priv_state))) > return; > > - regmap_write(priv->map, JZ_REG_LCD_STATE, 0); > - > /* Set addresses of our DMA descriptor chains */ > next_id = priv_state->use_palette ? HWDESC_PALETTE : 0; > regmap_write(priv->map, JZ_REG_LCD_DA0, dma_hwdesc_addr(priv, > next_id)); > regmap_write(priv->map, JZ_REG_LCD_DA1, dma_hwdesc_addr(priv, 1)); > > - regmap_update_bits(priv->map, JZ_REG_LCD_CTRL, > - JZ_LCD_CTRL_ENABLE | JZ_LCD_CTRL_DISABLE, > - JZ_LCD_CTRL_ENABLE); > - > drm_crtc_vblank_on(crtc); > } > > @@ -968,6 +974,7 @@ static const struct drm_encoder_helper_funcs > ingenic_drm_encoder_helper_funcs = > > static const struct drm_bridge_funcs ingenic_drm_bridge_funcs = { > .attach = ingenic_drm_bridge_attach, > + .atomic_enable = ingenic_drm_bridge_atomic_enable, Shouldn't we have a .atomic_disable() as well? If the CRTC is now enabled in the bridge's .atomic_enable, it would make sense to have it disabled in the .atomic_disable(). Cheers, -Paul > .atomic_check = ingenic_drm_bridge_atomic_check, > .atomic_reset = drm_atomic_helper_bridge_reset, > .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > -- > 2.35.1 >
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c index dcf44cb00821..51512f41263e 100644 --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c @@ -226,6 +226,18 @@ static int ingenic_drm_update_pixclk(struct notifier_block *nb, } } +static void ingenic_drm_bridge_atomic_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct ingenic_drm *priv = drm_device_get_priv(bridge->dev); + + regmap_write(priv->map, JZ_REG_LCD_STATE, 0); + + regmap_update_bits(priv->map, JZ_REG_LCD_CTRL, + JZ_LCD_CTRL_ENABLE | JZ_LCD_CTRL_DISABLE, + JZ_LCD_CTRL_ENABLE); +} + static void ingenic_drm_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state) { @@ -237,17 +249,11 @@ static void ingenic_drm_crtc_atomic_enable(struct drm_crtc *crtc, if (WARN_ON(IS_ERR(priv_state))) return; - regmap_write(priv->map, JZ_REG_LCD_STATE, 0); - /* Set addresses of our DMA descriptor chains */ next_id = priv_state->use_palette ? HWDESC_PALETTE : 0; regmap_write(priv->map, JZ_REG_LCD_DA0, dma_hwdesc_addr(priv, next_id)); regmap_write(priv->map, JZ_REG_LCD_DA1, dma_hwdesc_addr(priv, 1)); - regmap_update_bits(priv->map, JZ_REG_LCD_CTRL, - JZ_LCD_CTRL_ENABLE | JZ_LCD_CTRL_DISABLE, - JZ_LCD_CTRL_ENABLE); - drm_crtc_vblank_on(crtc); } @@ -968,6 +974,7 @@ static const struct drm_encoder_helper_funcs ingenic_drm_encoder_helper_funcs = static const struct drm_bridge_funcs ingenic_drm_bridge_funcs = { .attach = ingenic_drm_bridge_attach, + .atomic_enable = ingenic_drm_bridge_atomic_enable, .atomic_check = ingenic_drm_bridge_atomic_check, .atomic_reset = drm_atomic_helper_bridge_reset, .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
This allows the CRTC to be enabled after panels have slept out, and before their display is turned on, solving a graphical bug on the newvision nv3502c Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> --- drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)