diff mbox series

[2/3] mips: dts: mt7621: mux phy4 to gmac1 for GB-PC1

Message ID 20220410203138.22513-2-arinc.unal@arinc9.com (mailing list archive)
State Superseded
Headers show
Series [1/3] mips: dts: mt7621: add mdio label to mdio-bus | expand

Commit Message

Arınç ÜNAL April 10, 2022, 8:31 p.m. UTC 
Mux the MT7530 switch's phy4 to the SoC's gmac1 on the GB-PC1 devicetree.
This achieves 2 Gbps total bandwidth to the CPU using the second RGMII.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 .../boot/dts/ralink/mt7621-gnubee-gb-pc1.dts   | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

Comments

Sergio Paracuellos April 11, 2022, 7:20 a.m. UTC | #1 
On Sun, Apr 10, 2022 at 10:32 PM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
> Mux the MT7530 switch's phy4 to the SoC's gmac1 on the GB-PC1 devicetree.
> This achieves 2 Gbps total bandwidth to the CPU using the second RGMII.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
>  .../boot/dts/ralink/mt7621-gnubee-gb-pc1.dts   | 18 ++++++++++--------
>  1 file changed, 10 insertions(+), 8 deletions(-)

Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>

Thanks,
    Sergio Paracuellos
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
index 5892bcf71595..75f3b0425487 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
@@ -103,14 +103,21 @@  &pinctrl {
 
 	state_default: state-default {
 		gpio-pinmux {
-			groups = "rgmii2", "uart3", "wdt";
+			groups = "uart3", "wdt";
 			function = "gpio";
 		};
 	};
 };
 
-&ethernet {
-	pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+&gmac1 {
+	status = "okay";
+	phy-handle = <&ethphy4>;
+};
+
+&mdio {
+	ethphy4: ethernet-phy@4 {
+		reg = <4>;
+	};
 };
 
 &switch0 {
@@ -119,10 +126,5 @@  port@0 {
 			status = "okay";
 			label = "ethblack";
 		};
-
-		port@4 {
-			status = "okay";
-			label = "ethblue";
-		};
 	};
 };