diff mbox series

[v2,15/15] ARM: head.S: rename PMD_ORDER to PMD_ENTRY_ORDER

Message ID 20220705154708.181258-16-rppt@kernel.org (mailing list archive)
State Handled Elsewhere
Headers show
Series arch: make PxD_ORDER generically available | expand

Commit Message

Mike Rapoport July 5, 2022, 3:47 p.m. UTC 
From: Mike Rapoport <rppt@linux.ibm.com>

PMD_ORDER denotes order of magnitude for a PMD entry, i.e PMD entry
size is 2 ^ PMD_ORDER.

Rename PMD_ORDER to PMD_ENTRY_ORDER to allow a generic definition of
PMD_ORDER as order of a PMD allocation: (PMD_SHIFT - PAGE_SHIFT).

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 arch/arm/kernel/head.S | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 500612d3da2e..29e2900178a1 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -38,10 +38,10 @@ 
 #ifdef CONFIG_ARM_LPAE
 	/* LPAE requires an additional page for the PGD */
 #define PG_DIR_SIZE	0x5000
-#define PMD_ORDER	3
+#define PMD_ENTRY_ORDER	3	/* PMD entry size is 2^PMD_ENTRY_ORDER */
 #else
 #define PG_DIR_SIZE	0x4000
-#define PMD_ORDER	2
+#define PMD_ENTRY_ORDER	2
 #endif
 
 	.globl	swapper_pg_dir
@@ -240,7 +240,7 @@  __create_page_tables:
 	mov	r6, r6, lsr #SECTION_SHIFT
 
 1:	orr	r3, r7, r5, lsl #SECTION_SHIFT	@ flags + kernel base
-	str	r3, [r4, r5, lsl #PMD_ORDER]	@ identity mapping
+	str	r3, [r4, r5, lsl #PMD_ENTRY_ORDER]	@ identity mapping
 	cmp	r5, r6
 	addlo	r5, r5, #1			@ next section
 	blo	1b
@@ -250,7 +250,7 @@  __create_page_tables:
 	 * set two variables to indicate the physical start and end of the
 	 * kernel.
 	 */
-	add	r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ORDER)
+	add	r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	ldr	r6, =(_end - 1)
 	adr_l	r5, kernel_sec_start		@ _pa(kernel_sec_start)
 #if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
@@ -259,8 +259,8 @@  __create_page_tables:
 	str	r8, [r5]			@ Save physical start of kernel (LE)
 #endif
 	orr	r3, r8, r7			@ Add the MMU flags
-	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
-1:	str	r3, [r0], #1 << PMD_ORDER
+	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ENTRY_ORDER)
+1:	str	r3, [r0], #1 << PMD_ENTRY_ORDER
 	add	r3, r3, #1 << SECTION_SHIFT
 	cmp	r0, r6
 	bls	1b
@@ -280,14 +280,14 @@  __create_page_tables:
 	mov	r3, pc
 	mov	r3, r3, lsr #SECTION_SHIFT
 	orr	r3, r7, r3, lsl #SECTION_SHIFT
-	add	r0, r4,  #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
-	str	r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
+	add	r0, r4,  #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
+	str	r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ENTRY_ORDER]!
 	ldr	r6, =(_edata_loc - 1)
-	add	r0, r0, #1 << PMD_ORDER
-	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
+	add	r0, r0, #1 << PMD_ENTRY_ORDER
+	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ENTRY_ORDER)
 1:	cmp	r0, r6
 	add	r3, r3, #1 << SECTION_SHIFT
-	strls	r3, [r0], #1 << PMD_ORDER
+	strls	r3, [r0], #1 << PMD_ENTRY_ORDER
 	bls	1b
 #endif
 
@@ -297,10 +297,10 @@  __create_page_tables:
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
 	cmp	r2, #0
-	ldrne	r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
+	ldrne	r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	addne	r3, r3, r4
 	orrne	r6, r7, r0, lsl #SECTION_SHIFT
-	strne	r6, [r3], #1 << PMD_ORDER
+	strne	r6, [r3], #1 << PMD_ENTRY_ORDER
 	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]
 
@@ -319,7 +319,7 @@  __create_page_tables:
 	addruart r7, r3, r0
 
 	mov	r3, r3, lsr #SECTION_SHIFT
-	mov	r3, r3, lsl #PMD_ORDER
+	mov	r3, r3, lsl #PMD_ENTRY_ORDER
 
 	add	r0, r4, r3
 	mov	r3, r7, lsr #SECTION_SHIFT
@@ -349,7 +349,7 @@  __create_page_tables:
 	 * If we're using the NetWinder or CATS, we also need to map
 	 * in the 16550-type serial port for the debug messages
 	 */
-	add	r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER)
+	add	r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	orr	r3, r7, #0x7c000000
 	str	r3, [r0]
 #endif
@@ -359,10 +359,10 @@  __create_page_tables:
 	 * Similar reasons here - for debug.  This is
 	 * only for Acorn RiscPC architectures.
 	 */
-	add	r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER)
+	add	r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	orr	r3, r7, #0x02000000
 	str	r3, [r0]
-	add	r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
+	add	r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	str	r3, [r0]
 #endif
 #endif