@@ -365,13 +365,4 @@ extern void free_dma(unsigned int dmanr); /* release it again */
#define KERNEL_HAVE_CHECK_DMA
extern int check_dma(unsigned int dmanr);
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
-
#endif /* _ASM_DMA_H */
@@ -7,10 +7,5 @@
#define ASM_ARC_DMA_H
#define MAX_DMA_ADDRESS 0xC0000000
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy 0
-#endif
#endif
@@ -143,10 +143,4 @@ extern int get_dma_residue(unsigned int chan);
#endif /* CONFIG_ISA_DMA_API */
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
#endif /* __ASM_ARM_DMA_H */
@@ -12,8 +12,6 @@
extern unsigned long MAX_DMA_ADDRESS;
-extern int isa_dma_bridge_buggy;
-
#define free_dma(x)
#endif /* _ASM_IA64_DMA_H */
@@ -6,10 +6,4 @@
bootmem allocator (but this should do it for this) */
#define MAX_DMA_ADDRESS PAGE_OFFSET
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
#endif /* _M68K_DMA_H */
@@ -9,10 +9,4 @@
/* Virtual address corresponding to last available physical memory address. */
#define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
#endif /* _ASM_MICROBLAZE_DMA_H */
@@ -307,12 +307,4 @@ static __inline__ int get_dma_residue(unsigned int dmanr)
extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
extern void free_dma(unsigned int dmanr); /* release it again */
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
#endif /* _ASM_DMA_H */
@@ -176,10 +176,4 @@ static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
#define free_dma(dmanr)
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
#endif /* _ASM_DMA_H */
@@ -340,11 +340,5 @@ extern int request_dma(unsigned int dmanr, const char *device_id);
/* release it again */
extern void free_dma(unsigned int dmanr);
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DMA_H */
@@ -11,10 +11,4 @@
*/
#define MAX_DMA_ADDRESS 0x80000000
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
#endif /* _ASM_S390_DMA_H */
@@ -137,10 +137,4 @@ extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
#endif /* __ASM_SH_DMA_H */
@@ -82,14 +82,6 @@
#define DMA_BURST64 0x40
#define DMA_BURSTBITS 0x7f
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
#ifdef CONFIG_SPARC32
struct device;
@@ -307,12 +307,4 @@ extern int request_dma(unsigned int dmanr, const char *device_id);
extern void free_dma(unsigned int dmanr);
#endif
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
#endif /* _ASM_X86_DMA_H */
@@ -52,11 +52,4 @@
extern int request_dma(unsigned int dmanr, const char * device_id);
extern void free_dma(unsigned int dmanr);
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
-
#endif
@@ -8,7 +8,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
-#include <asm/dma.h>
+#include <linux/isa-dma.h>
#include <linux/comedi/comedidev.h>
#include <linux/comedi/comedi_isadma.h>
@@ -41,8 +41,10 @@ const char *pci_power_names[] = {
};
EXPORT_SYMBOL_GPL(pci_power_names);
+#ifdef CONFIG_X86_32
int isa_dma_bridge_buggy;
EXPORT_SYMBOL(isa_dma_bridge_buggy);
+#endif
int pci_pci_problems;
EXPORT_SYMBOL(pci_pci_problems);
@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/pci.h>
+#include <linux/isa-dma.h> /* isa_dma_bridge_buggy */
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/acpi.h>
@@ -30,7 +31,6 @@
#include <linux/pm_runtime.h>
#include <linux/suspend.h>
#include <linux/switchtec.h>
-#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
static ktime_t fixup_debug_start(struct pci_dev *dev,
@@ -239,6 +239,7 @@ static void quirk_passive_release(struct pci_dev *dev)
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release);
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release);
+#ifdef CONFIG_X86_32
/*
* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a
* workaround but VIA don't answer queries. If you happen to have good
@@ -265,6 +266,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs);
+#endif
/*
* Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear
new file mode 100644
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __LINUX_ISA_DMA_H
+#define __LINUX_ISA_DMA_H
+
+#include <asm/dma.h>
+
+#if defined(CONFIG_PCI) && defined(CONFIG_X86_32)
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+#endif /* __LINUX_ISA_DMA_H */
@@ -12,8 +12,8 @@
#undef HAVE_REALLY_SLOW_DMA_CONTROLLER
#include <linux/export.h>
+#include <linux/isa-dma.h>
#include <sound/core.h>
-#include <asm/dma.h>
/**
* snd_dma_program - program an ISA DMA transfer
During recent PCI cleanups we noticed that the isa_dma_bridge_buggy symbol supported by all architectures is actually only used for x86_32. This patch moves the symbol out of all architectures limiting usage to only x86_32. This is possible because only x86_32 platforms or quirks existing in PCI devices supported on x86_32 ever set this. A new global header linux/isa-dma.h is added to provide a common place to maintain the definition. Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Stafford Horne <shorne@gmail.com> --- Since v3: - New patch. arch/alpha/include/asm/dma.h | 9 --------- arch/arc/include/asm/dma.h | 5 ----- arch/arm/include/asm/dma.h | 6 ------ arch/ia64/include/asm/dma.h | 2 -- arch/m68k/include/asm/dma.h | 6 ------ arch/microblaze/include/asm/dma.h | 6 ------ arch/mips/include/asm/dma.h | 8 -------- arch/parisc/include/asm/dma.h | 6 ------ arch/powerpc/include/asm/dma.h | 6 ------ arch/s390/include/asm/dma.h | 6 ------ arch/sh/include/asm/dma.h | 6 ------ arch/sparc/include/asm/dma.h | 8 -------- arch/x86/include/asm/dma.h | 8 -------- arch/xtensa/include/asm/dma.h | 7 ------- drivers/comedi/drivers/comedi_isadma.c | 2 +- drivers/pci/pci.c | 2 ++ drivers/pci/quirks.c | 4 +++- include/linux/isa-dma.h | 14 ++++++++++++++ sound/core/isadma.c | 2 +- 19 files changed, 21 insertions(+), 92 deletions(-) create mode 100644 include/linux/isa-dma.h