| Message ID | 20230914114435.481900-4-keguang.zhang@gmail.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | Move Loongson1 MAC arch-code to the driver dir | expand |
On Thu, Sep 14, 2023 at 07:44:35PM +0800, Keguang Zhang wrote: > This glue driver is created based on the arch-code > implemented earlier with the platform-specific settings. > > Use syscon for SYSCON register access. > > And modify MAINTAINERS to add a new F: entry for this driver. > > Partially based on the previous work by Serge Semin. > > Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> -Serge(y) > --- > V4 -> V5: Replace stmmac_probe_config_dt() with devm_stmmac_probe_config_dt() > Replace stmmac_pltfr_probe() with devm_stmmac_pltfr_probe() > Add a new F: entry for this driver. > V3 -> V4: Drop ls1x_dwmac_syscon definition and its instances > Drop three redundant fields from the ls1x_dwmac structure > Drop the ls1x_dwmac_init() method. > Some minor improvements > V2 -> V3: Determine the device ID by physical > base address(suggested by Serge Semin) > Use regmap instead of regmap fields > Use syscon_regmap_lookup_by_phandle() > Some minor fixes > V1 -> V2: Fix the build errors due to CONFIG_OF being unset > Change struct reg_field definitions to const > Rename the syscon property to "loongson,dwmac-syscon" > Add MII PHY mode for LS1C > > MAINTAINERS | 1 + > drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 + > drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + > .../ethernet/stmicro/stmmac/dwmac-loongson1.c | 209 ++++++++++++++++++ > 4 files changed, 222 insertions(+) > create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index e514b53fb225..b71aff479a8c 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -14383,6 +14383,7 @@ F: Documentation/devicetree/bindings/*/loongson,ls1*.yaml > F: arch/mips/include/asm/mach-loongson32/ > F: arch/mips/loongson32/ > F: drivers/*/*loongson1* > +F: drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c > > MIPS/LOONGSON2EF ARCHITECTURE > M: Jiaxun Yang <jiaxun.yang@flygoat.com> > diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig > index 06c6871f8788..a2b9e289aa36 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig > +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig > @@ -239,6 +239,17 @@ config DWMAC_INTEL_PLAT > the stmmac device driver. This driver is used for the Intel Keem Bay > SoC. > > +config DWMAC_LOONGSON1 > + tristate "Loongson1 GMAC support" > + default MACH_LOONGSON32 > + depends on OF && (MACH_LOONGSON32 || COMPILE_TEST) > + help > + Support for ethernet controller on Loongson1 SoC. > + > + This selects Loongson1 SoC glue layer support for the stmmac > + device driver. This driver is used for Loongson1-based boards > + like Loongson LS1B/LS1C. > + > config DWMAC_TEGRA > tristate "NVIDIA Tegra MGBE support" > depends on ARCH_TEGRA || COMPILE_TEST > diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile > index 5b57aee19267..80e598bd4255 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/Makefile > +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile > @@ -29,6 +29,7 @@ obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o > obj-$(CONFIG_DWMAC_SUN8I) += dwmac-sun8i.o > obj-$(CONFIG_DWMAC_DWC_QOS_ETH) += dwmac-dwc-qos-eth.o > obj-$(CONFIG_DWMAC_INTEL_PLAT) += dwmac-intel-plat.o > +obj-$(CONFIG_DWMAC_LOONGSON1) += dwmac-loongson1.o > obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o > obj-$(CONFIG_DWMAC_IMX8) += dwmac-imx.o > obj-$(CONFIG_DWMAC_TEGRA) += dwmac-tegra.o > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c > new file mode 100644 > index 000000000000..3e86810717d3 > --- /dev/null > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c > @@ -0,0 +1,209 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Loongson-1 DWMAC glue layer > + * > + * Copyright (C) 2011-2023 Keguang Zhang <keguang.zhang@gmail.com> > + */ > + > +#include <linux/mfd/syscon.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/phy.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > + > +#include "stmmac.h" > +#include "stmmac_platform.h" > + > +#define LS1B_GMAC0_BASE (0x1fe10000) > +#define LS1B_GMAC1_BASE (0x1fe20000) > + > +/* Loongson-1 SYSCON Registers */ > +#define LS1X_SYSCON0 (0x0) > +#define LS1X_SYSCON1 (0x4) > + > +/* Loongson-1B SYSCON Register Bits */ > +#define GMAC1_USE_UART1 BIT(4) > +#define GMAC1_USE_UART0 BIT(3) > + > +#define GMAC1_SHUT BIT(13) > +#define GMAC0_SHUT BIT(12) > + > +#define GMAC1_USE_TXCLK BIT(3) > +#define GMAC0_USE_TXCLK BIT(2) > +#define GMAC1_USE_PWM23 BIT(1) > +#define GMAC0_USE_PWM01 BIT(0) > + > +/* Loongson-1C SYSCON Register Bits */ > +#define GMAC_SHUT BIT(6) > + > +#define PHY_INTF_SELI GENMASK(30, 28) > +#define PHY_INTF_MII FIELD_PREP(PHY_INTF_SELI, 0) > +#define PHY_INTF_RMII FIELD_PREP(PHY_INTF_SELI, 4) > + > +struct ls1x_dwmac { > + struct plat_stmmacenet_data *plat_dat; > + struct regmap *regmap; > +}; > + > +static int ls1b_dwmac_syscon_init(struct platform_device *pdev, void *priv) > +{ > + struct ls1x_dwmac *dwmac = priv; > + struct plat_stmmacenet_data *plat = dwmac->plat_dat; > + struct regmap *regmap = dwmac->regmap; > + struct resource *res; > + unsigned long reg_base; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) { > + dev_err(&pdev->dev, "Could not get IO_MEM resources\n"); > + return -EINVAL; > + } > + reg_base = (unsigned long)res->start; > + > + if (reg_base == LS1B_GMAC0_BASE) { > + switch (plat->phy_interface) { > + case PHY_INTERFACE_MODE_RGMII_ID: > + regmap_update_bits(regmap, LS1X_SYSCON0, > + GMAC0_USE_TXCLK | GMAC0_USE_PWM01, > + 0); > + break; > + case PHY_INTERFACE_MODE_MII: > + regmap_update_bits(regmap, LS1X_SYSCON0, > + GMAC0_USE_TXCLK | GMAC0_USE_PWM01, > + GMAC0_USE_TXCLK | GMAC0_USE_PWM01); > + break; > + default: > + dev_err(&pdev->dev, "Unsupported PHY mode %u\n", > + plat->phy_interface); > + return -EOPNOTSUPP; > + } > + > + regmap_update_bits(regmap, LS1X_SYSCON0, GMAC0_SHUT, 0); > + } else if (reg_base == LS1B_GMAC1_BASE) { > + regmap_update_bits(regmap, LS1X_SYSCON0, > + GMAC1_USE_UART1 | GMAC1_USE_UART0, > + GMAC1_USE_UART1 | GMAC1_USE_UART0); > + > + switch (plat->phy_interface) { > + case PHY_INTERFACE_MODE_RGMII_ID: > + regmap_update_bits(regmap, LS1X_SYSCON1, > + GMAC1_USE_TXCLK | GMAC1_USE_PWM23, > + 0); > + > + break; > + case PHY_INTERFACE_MODE_MII: > + regmap_update_bits(regmap, LS1X_SYSCON1, > + GMAC1_USE_TXCLK | GMAC1_USE_PWM23, > + GMAC1_USE_TXCLK | GMAC1_USE_PWM23); > + break; > + default: > + dev_err(&pdev->dev, "Unsupported PHY mode %u\n", > + plat->phy_interface); > + return -EOPNOTSUPP; > + } > + > + regmap_update_bits(regmap, LS1X_SYSCON1, GMAC1_SHUT, 0); > + } else { > + dev_err(&pdev->dev, "Invalid Ethernet MAC base address %lx", > + reg_base); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int ls1c_dwmac_syscon_init(struct platform_device *pdev, void *priv) > +{ > + struct ls1x_dwmac *dwmac = priv; > + struct plat_stmmacenet_data *plat = dwmac->plat_dat; > + struct regmap *regmap = dwmac->regmap; > + > + switch (plat->phy_interface) { > + case PHY_INTERFACE_MODE_MII: > + regmap_update_bits(regmap, LS1X_SYSCON1, PHY_INTF_SELI, > + PHY_INTF_MII); > + break; > + case PHY_INTERFACE_MODE_RMII: > + regmap_update_bits(regmap, LS1X_SYSCON1, PHY_INTF_SELI, > + PHY_INTF_RMII); > + break; > + default: > + dev_err(&pdev->dev, "Unsupported PHY-mode %u\n", > + plat->phy_interface); > + return -EOPNOTSUPP; > + } > + > + regmap_update_bits(regmap, LS1X_SYSCON0, GMAC0_SHUT, 0); > + > + return 0; > +} > + > +static int ls1x_dwmac_probe(struct platform_device *pdev) > +{ > + struct plat_stmmacenet_data *plat_dat; > + struct stmmac_resources stmmac_res; > + struct regmap *regmap; > + struct ls1x_dwmac *dwmac; > + int (*init)(struct platform_device *pdev, void *priv); > + int ret; > + > + ret = stmmac_get_platform_resources(pdev, &stmmac_res); > + if (ret) > + return ret; > + > + /* Probe syscon */ > + regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, > + "loongson,ls1-syscon"); > + if (IS_ERR(regmap)) > + return dev_err_probe(&pdev->dev, PTR_ERR(regmap), > + "Unable to find syscon\n"); > + > + init = of_device_get_match_data(&pdev->dev); > + if (!init) { > + dev_err(&pdev->dev, "No of match data provided\n"); > + return -EINVAL; > + } > + > + dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL); > + if (!dwmac) > + return -ENOMEM; > + > + plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac); > + if (IS_ERR(plat_dat)) > + return dev_err_probe(&pdev->dev, PTR_ERR(plat_dat), > + "dt configuration failed\n"); > + > + plat_dat->bsp_priv = dwmac; > + plat_dat->init = init; > + dwmac->plat_dat = plat_dat; > + dwmac->regmap = regmap; > + > + return devm_stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res); > +} > + > +static const struct of_device_id ls1x_dwmac_match[] = { > + { > + .compatible = "loongson,ls1b-gmac", > + .data = &ls1b_dwmac_syscon_init, > + }, > + { > + .compatible = "loongson,ls1c-emac", > + .data = &ls1c_dwmac_syscon_init, > + }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, ls1x_dwmac_match); > + > +static struct platform_driver ls1x_dwmac_driver = { > + .probe = ls1x_dwmac_probe, > + .driver = { > + .name = "loongson1-dwmac", > + .of_match_table = ls1x_dwmac_match, > + }, > +}; > +module_platform_driver(ls1x_dwmac_driver); > + > +MODULE_AUTHOR("Keguang Zhang <keguang.zhang@gmail.com>"); > +MODULE_DESCRIPTION("Loongson-1 DWMAC glue layer"); > +MODULE_LICENSE("GPL"); > -- > 2.39.2 > >
diff --git a/MAINTAINERS b/MAINTAINERS index e514b53fb225..b71aff479a8c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14383,6 +14383,7 @@ F: Documentation/devicetree/bindings/*/loongson,ls1*.yaml F: arch/mips/include/asm/mach-loongson32/ F: arch/mips/loongson32/ F: drivers/*/*loongson1* +F: drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c MIPS/LOONGSON2EF ARCHITECTURE M: Jiaxun Yang <jiaxun.yang@flygoat.com> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 06c6871f8788..a2b9e289aa36 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -239,6 +239,17 @@ config DWMAC_INTEL_PLAT the stmmac device driver. This driver is used for the Intel Keem Bay SoC. +config DWMAC_LOONGSON1 + tristate "Loongson1 GMAC support" + default MACH_LOONGSON32 + depends on OF && (MACH_LOONGSON32 || COMPILE_TEST) + help + Support for ethernet controller on Loongson1 SoC. + + This selects Loongson1 SoC glue layer support for the stmmac + device driver. This driver is used for Loongson1-based boards + like Loongson LS1B/LS1C. + config DWMAC_TEGRA tristate "NVIDIA Tegra MGBE support" depends on ARCH_TEGRA || COMPILE_TEST diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile index 5b57aee19267..80e598bd4255 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Makefile +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o obj-$(CONFIG_DWMAC_SUN8I) += dwmac-sun8i.o obj-$(CONFIG_DWMAC_DWC_QOS_ETH) += dwmac-dwc-qos-eth.o obj-$(CONFIG_DWMAC_INTEL_PLAT) += dwmac-intel-plat.o +obj-$(CONFIG_DWMAC_LOONGSON1) += dwmac-loongson1.o obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o obj-$(CONFIG_DWMAC_IMX8) += dwmac-imx.o obj-$(CONFIG_DWMAC_TEGRA) += dwmac-tegra.o diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c new file mode 100644 index 000000000000..3e86810717d3 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Loongson-1 DWMAC glue layer + * + * Copyright (C) 2011-2023 Keguang Zhang <keguang.zhang@gmail.com> + */ + +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "stmmac.h" +#include "stmmac_platform.h" + +#define LS1B_GMAC0_BASE (0x1fe10000) +#define LS1B_GMAC1_BASE (0x1fe20000) + +/* Loongson-1 SYSCON Registers */ +#define LS1X_SYSCON0 (0x0) +#define LS1X_SYSCON1 (0x4) + +/* Loongson-1B SYSCON Register Bits */ +#define GMAC1_USE_UART1 BIT(4) +#define GMAC1_USE_UART0 BIT(3) + +#define GMAC1_SHUT BIT(13) +#define GMAC0_SHUT BIT(12) + +#define GMAC1_USE_TXCLK BIT(3) +#define GMAC0_USE_TXCLK BIT(2) +#define GMAC1_USE_PWM23 BIT(1) +#define GMAC0_USE_PWM01 BIT(0) + +/* Loongson-1C SYSCON Register Bits */ +#define GMAC_SHUT BIT(6) + +#define PHY_INTF_SELI GENMASK(30, 28) +#define PHY_INTF_MII FIELD_PREP(PHY_INTF_SELI, 0) +#define PHY_INTF_RMII FIELD_PREP(PHY_INTF_SELI, 4) + +struct ls1x_dwmac { + struct plat_stmmacenet_data *plat_dat; + struct regmap *regmap; +}; + +static int ls1b_dwmac_syscon_init(struct platform_device *pdev, void *priv) +{ + struct ls1x_dwmac *dwmac = priv; + struct plat_stmmacenet_data *plat = dwmac->plat_dat; + struct regmap *regmap = dwmac->regmap; + struct resource *res; + unsigned long reg_base; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Could not get IO_MEM resources\n"); + return -EINVAL; + } + reg_base = (unsigned long)res->start; + + if (reg_base == LS1B_GMAC0_BASE) { + switch (plat->phy_interface) { + case PHY_INTERFACE_MODE_RGMII_ID: + regmap_update_bits(regmap, LS1X_SYSCON0, + GMAC0_USE_TXCLK | GMAC0_USE_PWM01, + 0); + break; + case PHY_INTERFACE_MODE_MII: + regmap_update_bits(regmap, LS1X_SYSCON0, + GMAC0_USE_TXCLK | GMAC0_USE_PWM01, + GMAC0_USE_TXCLK | GMAC0_USE_PWM01); + break; + default: + dev_err(&pdev->dev, "Unsupported PHY mode %u\n", + plat->phy_interface); + return -EOPNOTSUPP; + } + + regmap_update_bits(regmap, LS1X_SYSCON0, GMAC0_SHUT, 0); + } else if (reg_base == LS1B_GMAC1_BASE) { + regmap_update_bits(regmap, LS1X_SYSCON0, + GMAC1_USE_UART1 | GMAC1_USE_UART0, + GMAC1_USE_UART1 | GMAC1_USE_UART0); + + switch (plat->phy_interface) { + case PHY_INTERFACE_MODE_RGMII_ID: + regmap_update_bits(regmap, LS1X_SYSCON1, + GMAC1_USE_TXCLK | GMAC1_USE_PWM23, + 0); + + break; + case PHY_INTERFACE_MODE_MII: + regmap_update_bits(regmap, LS1X_SYSCON1, + GMAC1_USE_TXCLK | GMAC1_USE_PWM23, + GMAC1_USE_TXCLK | GMAC1_USE_PWM23); + break; + default: + dev_err(&pdev->dev, "Unsupported PHY mode %u\n", + plat->phy_interface); + return -EOPNOTSUPP; + } + + regmap_update_bits(regmap, LS1X_SYSCON1, GMAC1_SHUT, 0); + } else { + dev_err(&pdev->dev, "Invalid Ethernet MAC base address %lx", + reg_base); + return -EINVAL; + } + + return 0; +} + +static int ls1c_dwmac_syscon_init(struct platform_device *pdev, void *priv) +{ + struct ls1x_dwmac *dwmac = priv; + struct plat_stmmacenet_data *plat = dwmac->plat_dat; + struct regmap *regmap = dwmac->regmap; + + switch (plat->phy_interface) { + case PHY_INTERFACE_MODE_MII: + regmap_update_bits(regmap, LS1X_SYSCON1, PHY_INTF_SELI, + PHY_INTF_MII); + break; + case PHY_INTERFACE_MODE_RMII: + regmap_update_bits(regmap, LS1X_SYSCON1, PHY_INTF_SELI, + PHY_INTF_RMII); + break; + default: + dev_err(&pdev->dev, "Unsupported PHY-mode %u\n", + plat->phy_interface); + return -EOPNOTSUPP; + } + + regmap_update_bits(regmap, LS1X_SYSCON0, GMAC0_SHUT, 0); + + return 0; +} + +static int ls1x_dwmac_probe(struct platform_device *pdev) +{ + struct plat_stmmacenet_data *plat_dat; + struct stmmac_resources stmmac_res; + struct regmap *regmap; + struct ls1x_dwmac *dwmac; + int (*init)(struct platform_device *pdev, void *priv); + int ret; + + ret = stmmac_get_platform_resources(pdev, &stmmac_res); + if (ret) + return ret; + + /* Probe syscon */ + regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "loongson,ls1-syscon"); + if (IS_ERR(regmap)) + return dev_err_probe(&pdev->dev, PTR_ERR(regmap), + "Unable to find syscon\n"); + + init = of_device_get_match_data(&pdev->dev); + if (!init) { + dev_err(&pdev->dev, "No of match data provided\n"); + return -EINVAL; + } + + dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL); + if (!dwmac) + return -ENOMEM; + + plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return dev_err_probe(&pdev->dev, PTR_ERR(plat_dat), + "dt configuration failed\n"); + + plat_dat->bsp_priv = dwmac; + plat_dat->init = init; + dwmac->plat_dat = plat_dat; + dwmac->regmap = regmap; + + return devm_stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res); +} + +static const struct of_device_id ls1x_dwmac_match[] = { + { + .compatible = "loongson,ls1b-gmac", + .data = &ls1b_dwmac_syscon_init, + }, + { + .compatible = "loongson,ls1c-emac", + .data = &ls1c_dwmac_syscon_init, + }, + { } +}; +MODULE_DEVICE_TABLE(of, ls1x_dwmac_match); + +static struct platform_driver ls1x_dwmac_driver = { + .probe = ls1x_dwmac_probe, + .driver = { + .name = "loongson1-dwmac", + .of_match_table = ls1x_dwmac_match, + }, +}; +module_platform_driver(ls1x_dwmac_driver); + +MODULE_AUTHOR("Keguang Zhang <keguang.zhang@gmail.com>"); +MODULE_DESCRIPTION("Loongson-1 DWMAC glue layer"); +MODULE_LICENSE("GPL");
This glue driver is created based on the arch-code implemented earlier with the platform-specific settings. Use syscon for SYSCON register access. And modify MAINTAINERS to add a new F: entry for this driver. Partially based on the previous work by Serge Semin. Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> --- V4 -> V5: Replace stmmac_probe_config_dt() with devm_stmmac_probe_config_dt() Replace stmmac_pltfr_probe() with devm_stmmac_pltfr_probe() Add a new F: entry for this driver. V3 -> V4: Drop ls1x_dwmac_syscon definition and its instances Drop three redundant fields from the ls1x_dwmac structure Drop the ls1x_dwmac_init() method. Some minor improvements V2 -> V3: Determine the device ID by physical base address(suggested by Serge Semin) Use regmap instead of regmap fields Use syscon_regmap_lookup_by_phandle() Some minor fixes V1 -> V2: Fix the build errors due to CONFIG_OF being unset Change struct reg_field definitions to const Rename the syscon property to "loongson,dwmac-syscon" Add MII PHY mode for LS1C MAINTAINERS | 1 + drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 + drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + .../ethernet/stmicro/stmmac/dwmac-loongson1.c | 209 ++++++++++++++++++ 4 files changed, 222 insertions(+) create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c