@@ -232,7 +232,7 @@ config ATH79
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_MIPS16
- select SYS_SUPPORTS_ZBOOT_UART_PROM
+ select SYS_SUPPORTS_ZBOOT
select USE_OF
select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
help
@@ -413,7 +413,7 @@ config MACH_INGENIC_SOC
bool "Ingenic SoC based machines"
select MIPS_GENERIC
select MACH_INGENIC
- select SYS_SUPPORTS_ZBOOT_UART16550
+ select SYS_SUPPORTS_ZBOOT
select CPU_SUPPORTS_CPUFREQ
select MIPS_EXTERNAL_TIMER
@@ -1727,14 +1727,6 @@ config SYS_SUPPORTS_ZBOOT
select HAVE_KERNEL_XZ
select HAVE_KERNEL_ZSTD
-config SYS_SUPPORTS_ZBOOT_UART16550
- bool
- select SYS_SUPPORTS_ZBOOT
-
-config SYS_SUPPORTS_ZBOOT_UART_PROM
- bool
- select SYS_SUPPORTS_ZBOOT
-
config CPU_LOONGSON2EF
bool
select CPU_SUPPORTS_32BIT_KERNEL
@@ -79,33 +79,6 @@ config SB1XXX_CORELIS
Select compile flags that produce code that can be processed by the
Corelis mksym utility and UDB Emulator.
-config DEBUG_ZBOOT
- bool "Enable compressed kernel support debugging"
- depends on DEBUG_KERNEL && SYS_SUPPORTS_ZBOOT
- default n
- help
- If you want to add compressed kernel support to a new board, and the
- board supports uart16550 compatible serial port, please select
- SYS_SUPPORTS_ZBOOT_UART16550 for your board and enable this option to
- debug it.
-
- If your board doesn't support uart16550 compatible serial port, you
- can try to select SYS_SUPPORTS_ZBOOT and use the other methods to
- debug it. for example, add a new serial port support just as
- arch/mips/boot/compressed/uart-16550.c does.
-
- After the compressed kernel support works, please disable this option
- to reduce the kernel image size and speed up the booting procedure a
- little.
-
-config ZBOOT_INGENIC_UART
- int "UART to use for compressed kernel debugging"
- depends on DEBUG_ZBOOT && MACH_INGENIC_SOC
- default 0
- range 0 4
- help
- Specify the UART that should be used for compressed kernel debugging.
-
config SPINLOCK_TEST
bool "Enable spinlock timing tests in debugfs"
depends on DEBUG_FS
@@ -328,3 +301,22 @@ config DEBUG_UART_8250_WIDTH
int "Register width for the 8250 debug UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
default 1
+
+config DEBUG_ZBOOT
+ bool "Enable compressed kernel debugging via DEBUG_LL output"
+ depends on DEBUG_LL && SYS_SUPPORTS_ZBOOT
+ help
+ Say Y here if you want to enable debugging of a compressed kernel
+ via the DEBUG_LL output. This is useful if you are debugging
+ decompressor issues.
+
+ If unsure, say N.
+
+config DEBUG_ZBOOT_EXCEPT
+ bool "Enable compressed kernel debugging of exceptions"
+ depends on DEBUG_ZBOOT
+ help
+ Say Y here if you want to enable debugging of exceptions happen
+ during decompression of a compressed kernel via the DEBUG_LL output.
+
+ If unsure, say N.
@@ -43,13 +43,8 @@ KCSAN_SANITIZE := n
# decompressor objects (linked with vmlinuz)
vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o $(obj)/bswapsi.o
-ifdef CONFIG_DEBUG_ZBOOT
-vmlinuzobjs-$(CONFIG_DEBUG_ZBOOT) += $(obj)/dbg.o
-vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
-vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM) += $(obj)/uart-prom.o
-vmlinuzobjs-$(CONFIG_MIPS_ALCHEMY) += $(obj)/uart-alchemy.o
-vmlinuzobjs-$(CONFIG_ATH79) += $(obj)/uart-ath79.o
-endif
+vmlinuzobjs-$(CONFIG_DEBUG_ZBOOT) += $(obj)/debug.o
+vmlinuzobjs-$(CONFIG_DEBUG_ZBOOT_EXCEPT) += $(obj)/debug-vec.o
vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o
deleted file mode 100644
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * MIPS-specific debug support for pre-boot environment
- *
- * NOTE: putc() is board specific, if your board have a 16550 compatible uart,
- * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you
- * need to implement your own putc().
- */
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-void __weak putc(char c)
-{
-}
-
-void puts(const char *s)
-{
- char c;
- while ((c = *s++) != '\0') {
- putc(c);
- if (c == '\n')
- putc('\r');
- }
-}
-
-void puthex(unsigned long long val)
-{
-
- unsigned char buf[10];
- int i;
- for (i = 7; i >= 0; i--) {
- buf[i] = "0123456789ABCDEF"[val & 0x0F];
- val >>= 4;
- }
- buf[8] = '\0';
- puts(buf);
-}
new file mode 100644
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include "../../kernel/debug-vec.S"
new file mode 100644
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include "../../kernel/debug.S"
@@ -31,8 +31,10 @@ extern unsigned char __image_begin[], __image_end[];
/* debug interfaces */
#ifdef CONFIG_DEBUG_ZBOOT
-extern void puts(const char *s);
-extern void puthex(unsigned long long val);
+extern void printascii(const char *s);
+extern void printhexl(unsigned long val);
+#define puts(s) printascii(s)
+#define puthex(val) printhexl(val)
#else
#define puts(s) do {} while (0)
#define puthex(val) do {} while (0)
@@ -22,6 +22,12 @@
move s2, a2
move s3, a3
+#ifdef CONFIG_DEBUG_ZBOOT_EXCEP
+ /* Set up the exception vector */
+ PTR_LA t9, setup_debug_ll_exception
+ jalr t9
+#endif
+
/* Clear BSS */
PTR_LA a0, _edata
PTR_LA a2, _end
deleted file mode 100644
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * 16550 compatible uart based serial debug support for zboot
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/addrspace.h>
-
-#if defined(CONFIG_MACH_LOONGSON64) || defined(CONFIG_MIPS_MALTA)
-#define UART_BASE 0x1fd003f8
-#define PORT(offset) (CKSEG1ADDR(UART_BASE) + (offset))
-#endif
-
-#ifdef CONFIG_MACH_INGENIC
-#define INGENIC_UART_BASE_ADDR (0x10030000 + 0x1000 * CONFIG_ZBOOT_INGENIC_UART)
-#define PORT(offset) (CKSEG1ADDR(INGENIC_UART_BASE_ADDR) + (4 * offset))
-#endif
-
-#ifndef IOTYPE
-#define IOTYPE char
-#endif
-
-#ifndef PORT
-#error please define the serial port address for your own machine
-#endif
-
-static inline unsigned int serial_in(int offset)
-{
- return *((volatile IOTYPE *)PORT(offset)) & 0xFF;
-}
-
-static inline void serial_out(int offset, int value)
-{
- *((volatile IOTYPE *)PORT(offset)) = value & 0xFF;
-}
-
-void putc(char c)
-{
- int timeout = 1000000;
-
- while (((serial_in(UART_LSR) & UART_LSR_THRE) == 0) && (timeout-- > 0))
- ;
-
- serial_out(UART_TX, c);
-}
deleted file mode 100644
@@ -1,7 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <asm/mach-au1x00/au1000.h>
-
-void putc(char c)
-{
- alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
-}
deleted file mode 100644
@@ -1,2 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "../../ath79/early_printk.c"
deleted file mode 100644
@@ -1,7 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <asm/setup.h>
-
-void putc(char c)
-{
- prom_putchar(c);
-}
Since now debug_ll facilities can cover all platforms supported by zboot debug print, and it provides extra capability on debugging exceptions, switch zboot to use those facilities. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> --- arch/mips/Kconfig | 12 ++------ arch/mips/Kconfig.debug | 46 +++++++++++++------------------ arch/mips/boot/compressed/Makefile | 9 ++---- arch/mips/boot/compressed/dbg.c | 37 ------------------------- arch/mips/boot/compressed/debug-vec.S | 3 ++ arch/mips/boot/compressed/debug.S | 3 ++ arch/mips/boot/compressed/decompress.c | 6 ++-- arch/mips/boot/compressed/head.S | 6 ++++ arch/mips/boot/compressed/uart-16550.c | 47 -------------------------------- arch/mips/boot/compressed/uart-alchemy.c | 7 ----- arch/mips/boot/compressed/uart-ath79.c | 2 -- arch/mips/boot/compressed/uart-prom.c | 7 ----- 12 files changed, 39 insertions(+), 146 deletions(-)