diff mbox series

[v3,3/3] mips: dts: ralink: mt7621: add serial1 and serial2 nodes

Message ID 20240308155616.11742-4-justin.swartz@risingedge.co.za (mailing list archive)
State Accepted
Headers show
Series Extend devicetree coverage of MT7621's UART interfaces | expand

Commit Message

Justin Swartz March 8, 2024, 3:56 p.m. UTC 
Add serial1 and serial2 nodes to define the existence of
the MT7621's second and third UARTs.

Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
---
 arch/mips/boot/dts/ralink/mt7621.dtsi | 40 +++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

--

Comments

Arınç ÜNAL March 8, 2024, 4:19 p.m. UTC | #1 
On 08/03/2024 18:56, Justin Swartz wrote:
> Add serial1 and serial2 nodes to define the existence of
> the MT7621's second and third UARTs.
> 
> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>

Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>

Arınç
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index 68467fca3..02e1f2491 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -129,6 +129,46 @@  serial0: serial@c00 {
 			pinctrl-0 = <&uart1_pins>;
 		};
 
+		serial1: serial@d00 {
+			compatible = "ns16550a";
+			reg = <0xd00 0x100>;
+
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			clocks = <&sysc MT7621_CLK_UART2>;
+
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>;
+
+			no-loopback-test;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins>;
+
+			status = "disabled";
+		};
+
+		serial2: serial@e00 {
+			compatible = "ns16550a";
+			reg = <0xe00 0x100>;
+
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			clocks = <&sysc MT7621_CLK_UART3>;
+
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>;
+
+			no-loopback-test;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pins>;
+
+			status = "disabled";
+		};
+
 		spi0: spi@b00 {
 			status = "disabled";