diff mbox series

[v2,02/11] dt-bindings: clock: mobileye,eyeq5-reset: drop bindings

Message ID 20240503-mbly-olb-v2-2-95ce5a1e18fe@bootlin.com (mailing list archive)
State Superseded
Headers show
Series Add Mobileye EyeQ system controller support (clk, reset, pinctrl) | expand

Commit Message

Théo Lebrun May 3, 2024, 2:20 p.m. UTC
Switch from sub-nodes in system-controller for each functionality to a
single node representing the entire OLB instance. dt-bindings is
unnecessary and soc/mobileye/mobileye,eyeq5-olb.yaml will inherit all
properties.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 .../bindings/reset/mobileye,eyeq5-reset.yaml       | 43 ----------------------
 1 file changed, 43 deletions(-)

Comments

Rob Herring (Arm) May 3, 2024, 3:35 p.m. UTC | #1
On Fri, 03 May 2024 16:20:47 +0200, Théo Lebrun wrote:
> Switch from sub-nodes in system-controller for each functionality to a
> single node representing the entire OLB instance. dt-bindings is
> unnecessary and soc/mobileye/mobileye,eyeq5-olb.yaml will inherit all
> properties.
> 
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> ---
>  .../bindings/reset/mobileye,eyeq5-reset.yaml       | 43 ----------------------
>  1 file changed, 43 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dtb: /example-0/remoteproc@cd00000: failed to match any schema with compatible: ['qcom,ipq8074-wcss-pil']
Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart']
Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy']
Documentation/devicetree/bindings/sound/st,stm32-sai.example.dtb: /example-0/sai@4400b000/audio-controller@4400b004: failed to match any schema with compatible: ['st,stm32-sai-sub-a']
Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240503-mbly-olb-v2-2-95ce5a1e18fe@bootlin.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml b/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml
deleted file mode 100644
index 062b4518347b..000000000000
--- a/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml
+++ /dev/null
@@ -1,43 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/reset/mobileye,eyeq5-reset.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mobileye EyeQ5 reset controller
-
-description:
-  The EyeQ5 reset driver handles three reset domains. Its registers live in a
-  shared region called OLB.
-
-maintainers:
-  - Grégory Clement <gregory.clement@bootlin.com>
-  - Théo Lebrun <theo.lebrun@bootlin.com>
-  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
-
-properties:
-  compatible:
-    const: mobileye,eyeq5-reset
-
-  reg:
-    maxItems: 3
-
-  reg-names:
-    items:
-      - const: d0
-      - const: d1
-      - const: d2
-
-  "#reset-cells":
-    const: 2
-    description:
-      The first cell is the domain (0 to 2 inclusive) and the second one is the
-      reset index inside that domain.
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - "#reset-cells"
-
-additionalProperties: false