diff mbox series

[v3,2/9] mips: dts: realtek: add device_type property to cpu node

Message ID 20240627043317.3751996-3-chris.packham@alliedtelesis.co.nz (mailing list archive)
State Superseded
Headers show
Series mips: Support for RTL9302C | expand

Commit Message

Chris Packham June 27, 2024, 4:33 a.m. UTC 
Add device_type = "cpu" to the cpu node for the rtl838x SoC. This
resolves the following dtbs_check complaint:

 cpus: cpu@0: 'cache-level' is a required property

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v2:
    - New

 arch/mips/boot/dts/realtek/rtl838x.dtsi | 1 +
 1 file changed, 1 insertion(+)

Comments

Marek Behún June 27, 2024, 11:01 a.m. UTC | #1 
On Thu, 27 Jun 2024 16:33:10 +1200
Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> Add device_type = "cpu" to the cpu node for the rtl838x SoC. This
> resolves the following dtbs_check complaint:
> 
>  cpus: cpu@0: 'cache-level' is a required property
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Reviewed-by: Marek Behún <kabel@kernel.org>
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/realtek/rtl838x.dtsi b/arch/mips/boot/dts/realtek/rtl838x.dtsi
index 6cc4ff5c0d19..722106e39194 100644
--- a/arch/mips/boot/dts/realtek/rtl838x.dtsi
+++ b/arch/mips/boot/dts/realtek/rtl838x.dtsi
@@ -6,6 +6,7 @@  cpus {
 		#size-cells = <0>;
 
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "mips,mips4KEc";
 			reg = <0>;
 			clocks = <&baseclk 0>;