From patchwork Fri Jun 28 16:11:51 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Th=C3=A9o_Lebrun?= X-Patchwork-Id: 13716397 Received: from relay8-d.mail.gandi.net (relay8-d.mail.gandi.net [217.70.183.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2949B1C9ED5; Fri, 28 Jun 2024 16:12:00 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1719591123; cv=none; b=l4dqPvxJhSqi7JBCNgYk6AYn00WGGWXxGr6UnSNRhqU2VitJSGpMxwisCGoAbr6cvOXuhh15vWf5sQriKSIrIogm42INgrIDbQfUH0Kb+saL9A9Xxqy6xy+P4bxqUFgFVudPrg+0iazhRL7pgu9Y62jkVIUQlEaSplVJ2+iWM6I= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1719591123; c=relaxed/simple; bh=6lyeIV5XuebcqycSfmRbIddp2M0F1kdXKtMAmKYG12M=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=N5AV/cJnNIww0mZjOoDX17P/9fLSbzP8kctnm/Rjs6Ru508DHr5e8h5IhxnU3jDg5R+/cke7u/jky1MZe4RSJoUnyON/7zBwqL74iQUoQNsb1zxPmUjULpZo1DudeIu0s6OhJjWnkXJEnRc7bhGSxDB4kgrKmlwnAgXu//qHzt0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=fPrZF1Y+; arc=none smtp.client-ip=217.70.183.201 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="fPrZF1Y+" Received: by mail.gandi.net (Postfix) with ESMTPSA id 51D1C1BF203; Fri, 28 Jun 2024 16:11:53 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1719591113; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=MgbXxMZ0jIn6/AB4fQ+7gQsAr/ZppqYc7pzl8m+uUAM=; b=fPrZF1Y+jc4XSmbkuFFFl+WnPYvtaMDqBx37g63QLCzevqMxi5ldKU5lQpfg2rYKXsaCIe KbA+KNeubVGnLO4i+vXo17Cmj53JFcoIOz+/X9C4xf+RLXr+LaXSr/itKrjLty2/pZ+jJf tqZ/9/Jw1upHcYKwiAFR5SkwonM8UCn+N40fZPv9Ngw+gDjKYuoKXOvUDLc2Zv7PMD8shS 2Ai7VfQhGp5pD+h0RZ9mm4ctd6uct3zulmaB9SLJHzGHUdOIjdqQr40SuEWmt1lKmDfuNU nTIB9zTTHNa9EnUyNqu70CZk6lEIWGobcZieTEvTKyi75D94gc/M6geM6jQIoA== From: =?utf-8?q?Th=C3=A9o_Lebrun?= Date: Fri, 28 Jun 2024 18:11:51 +0200 Subject: [PATCH 2/3] MIPS: mobileye: eyeq5: add OLB system-controller node Precedence: bulk X-Mailing-List: linux-mips@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240628-mbly-mips-v1-2-f53f5e4c422b@bootlin.com> References: <20240628-mbly-mips-v1-0-f53f5e4c422b@bootlin.com> In-Reply-To: <20240628-mbly-mips-v1-0-f53f5e4c422b@bootlin.com> To: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Thomas Bogendoerfer Cc: linux-mips@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Kondratiev , =?utf-8?q?Gr=C3=A9?= =?utf-8?q?gory_Clement?= , Thomas Petazzoni , Tawfik Bayouk , =?utf-8?q?Th=C3=A9o_Lebrun?= X-Mailer: b4 0.15-dev-13183 X-GND-Sasl: theo.lebrun@bootlin.com The OLB ("Other Logic Block") is a system-controller region hosting clock, reset and pin controllers. It contains registers such as I2C speed mode that need to be accessible by other nodes. Remove fixed-clocks previously used; replace references. Add parent crystal clock, fixed at 30MHz. Add pin nodes for all functions. Add mobileye,eyeq5-olb compatible node, hosting clk, reset and pinctrl. Add reset and pinctrl references to UART nodes. Signed-off-by: Théo Lebrun --- .../{eyeq5-fixed-clocks.dtsi => eyeq5-clocks.dtsi} | 54 +++------ arch/mips/boot/dts/mobileye/eyeq5-pins.dtsi | 125 +++++++++++++++++++++ arch/mips/boot/dts/mobileye/eyeq5.dtsi | 22 +++- 3 files changed, 162 insertions(+), 39 deletions(-) diff --git a/arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi b/arch/mips/boot/dts/mobileye/eyeq5-clocks.dtsi similarity index 88% rename from arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi rename to arch/mips/boot/dts/mobileye/eyeq5-clocks.dtsi index 78f5533a95c6..17a342cc744e 100644 --- a/arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi +++ b/arch/mips/boot/dts/mobileye/eyeq5-clocks.dtsi @@ -3,42 +3,20 @@ * Copyright 2023 Mobileye Vision Technologies Ltd. */ +#include + / { /* Fixed clock */ - pll_cpu: pll-cpu { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1500000000>; - }; - - pll_vdi: pll-vdi { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1280000000>; - }; - - pll_per: pll-per { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <2000000000>; - }; - - pll_ddr0: pll-ddr0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1857210000>; - }; - - pll_ddr1: pll-ddr1 { + xtal: xtal { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <1857210000>; + clock-frequency = <30000000>; }; /* PLL_CPU derivatives */ occ_cpu: occ-cpu { compatible = "fixed-factor-clock"; - clocks = <&pll_cpu>; + clocks = <&olb EQ5C_PLL_CPU>; #clock-cells = <0>; clock-div = <1>; clock-mult = <1>; @@ -101,7 +79,7 @@ mem_clk: mem-clk { }; occ_isram: occ-isram { compatible = "fixed-factor-clock"; - clocks = <&pll_cpu>; + clocks = <&olb EQ5C_PLL_CPU>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; @@ -115,7 +93,7 @@ isram_clk: isram-clk { /* gate ClkRstGen_isram */ }; occ_dbu: occ-dbu { compatible = "fixed-factor-clock"; - clocks = <&pll_cpu>; + clocks = <&olb EQ5C_PLL_CPU>; #clock-cells = <0>; clock-div = <10>; clock-mult = <1>; @@ -130,7 +108,7 @@ si_dbu_tp_pclk: si-dbu-tp-pclk { /* gate ClkRstGen_dbu */ /* PLL_VDI derivatives */ occ_vdi: occ-vdi { compatible = "fixed-factor-clock"; - clocks = <&pll_vdi>; + clocks = <&olb EQ5C_PLL_VDI>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; @@ -144,7 +122,7 @@ vdi_clk: vdi-clk { /* gate ClkRstGen_vdi */ }; occ_can_ser: occ-can-ser { compatible = "fixed-factor-clock"; - clocks = <&pll_vdi>; + clocks = <&olb EQ5C_PLL_VDI>; #clock-cells = <0>; clock-div = <16>; clock-mult = <1>; @@ -158,7 +136,7 @@ can_ser_clk: can-ser-clk { /* gate ClkRstGen_can_ser */ }; i2c_ser_clk: i2c-ser-clk { compatible = "fixed-factor-clock"; - clocks = <&pll_vdi>; + clocks = <&olb EQ5C_PLL_VDI>; #clock-cells = <0>; clock-div = <20>; clock-mult = <1>; @@ -166,7 +144,7 @@ i2c_ser_clk: i2c-ser-clk { /* PLL_PER derivatives */ occ_periph: occ-periph { compatible = "fixed-factor-clock"; - clocks = <&pll_per>; + clocks = <&olb EQ5C_PLL_PER>; #clock-cells = <0>; clock-div = <16>; clock-mult = <1>; @@ -225,7 +203,7 @@ gpio_clk: gpio-clk { }; emmc_sys_clk: emmc-sys-clk { compatible = "fixed-factor-clock"; - clocks = <&pll_per>; + clocks = <&olb EQ5C_PLL_PER>; #clock-cells = <0>; clock-div = <10>; clock-mult = <1>; @@ -233,7 +211,7 @@ emmc_sys_clk: emmc-sys-clk { }; ccf_ctrl_clk: ccf-ctrl-clk { compatible = "fixed-factor-clock"; - clocks = <&pll_per>; + clocks = <&olb EQ5C_PLL_PER>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; @@ -241,7 +219,7 @@ ccf_ctrl_clk: ccf-ctrl-clk { }; occ_mjpeg_core: occ-mjpeg-core { compatible = "fixed-factor-clock"; - clocks = <&pll_per>; + clocks = <&olb EQ5C_PLL_PER>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; @@ -265,7 +243,7 @@ mjpeg_core_clk: mjpeg-core-clk { /* gate ClkRstGen_mjpeg_gen */ }; fcmu_a_clk: fcmu-a-clk { compatible = "fixed-factor-clock"; - clocks = <&pll_per>; + clocks = <&olb EQ5C_PLL_PER>; #clock-cells = <0>; clock-div = <20>; clock-mult = <1>; @@ -273,7 +251,7 @@ fcmu_a_clk: fcmu-a-clk { }; occ_pci_sys: occ-pci-sys { compatible = "fixed-factor-clock"; - clocks = <&pll_per>; + clocks = <&olb EQ5C_PLL_PER>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; diff --git a/arch/mips/boot/dts/mobileye/eyeq5-pins.dtsi b/arch/mips/boot/dts/mobileye/eyeq5-pins.dtsi new file mode 100644 index 000000000000..0b3671013ab4 --- /dev/null +++ b/arch/mips/boot/dts/mobileye/eyeq5-pins.dtsi @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +/* + * Default pin configuration for Mobileye EyeQ5 boards. We mostly create one + * pin configuration node per function. + */ + +&olb { + timer0_pins: timer0-pins { + function = "timer0"; + pins = "PA0", "PA1"; + }; + timer1_pins: timer1-pins { + function = "timer1"; + pins = "PA2", "PA3"; + }; + timer2_pins: timer2-pins { + function = "timer2"; + pins = "PA4", "PA5"; + }; + pps0_pins: pps0-pin { + function = "timer2"; + pins = "PA4"; + }; + pps1_pins: pps1-pin { + function = "timer2"; + pins = "PA5"; + }; + timer5_ext_pins: timer5-ext-pins { + function = "timer5"; + pins = "PA6", "PA7", "PA8", "PA9"; + }; + timer5_ext_input_pins: timer5-ext-input-pins { + function = "timer5"; + pins = "PA6", "PA7"; + }; + timer5_ext_incap_a_pins: timer5-ext-incap-a-pin { + function = "timer5"; + pins = "PA6"; + }; + timer5_ext_incap_b_pins: timer5-ext-incap-b-pin { + function = "timer5"; + pins = "PA7"; + }; + can0_pins: can0-pins { + function = "can0"; + pins = "PA14", "PA15"; + }; + can1_pins: can1-pins { + function = "can1"; + pins = "PA16", "PA17"; + }; + uart0_pins: uart0-pins { + function = "uart0"; + pins = "PA10", "PA11"; + }; + uart1_pins: uart1-pins { + function = "uart1"; + pins = "PA12", "PA13"; + }; + spi0_pins: spi0-pins { + function = "spi0"; + pins = "PA18", "PA19", "PA20", "PA21", "PA22"; + }; + spi1_pins: spi1-pins { + function = "spi1"; + pins = "PA23", "PA24", "PA25", "PA26", "PA27"; + }; + spi1_slave_pins: spi1-slave-pins { + function = "spi1"; + pins = "PA24", "PA25", "PA26"; + }; + refclk0_pins: refclk0-pin { + function = "refclk0"; + pins = "PA28"; + }; + timer3_pins: timer3-pins { + function = "timer3"; + pins = "PB0", "PB1"; + }; + timer4_pins: timer4-pins { + function = "timer4"; + pins = "PB2", "PB3"; + }; + timer6_ext_pins: timer6-ext-pins { + function = "timer6"; + pins = "PB4", "PB5", "PB6", "PB7"; + }; + timer6_ext_input_pins: timer6-ext-input-pins { + function = "timer6"; + pins = "PB4", "PB5"; + }; + timer6_ext_incap_a_pins: timer6-ext-incap-a-pin { + function = "timer6"; + pins = "PB4"; + }; + timer6_ext_incap_b_pins: timer6-ext-incap-b-pin { + function = "timer6"; + pins = "PB5"; + }; + can2_pins: can2-pins { + function = "can2"; + pins = "PB10", "PB11"; + }; + uart2_pins: uart2-pins { + function = "uart2"; + pins = "PB8", "PB9"; + }; + spi2_pins: spi2-pins { + function = "spi2"; + pins = "PB12", "PB13", "PB14", "PB15", "PB16"; + }; + spi3_pins: spi3-pins { + function = "spi3"; + pins = "PB17", "PB18", "PB19", "PB20", "PB21"; + }; + spi3_slave_pins: spi3-slave-pins { + function = "spi3"; + pins = "PB18", "PB19", "PB20"; + }; + mclk0_pins: mclk0-pin { + function = "mclk0"; + pins = "PB22"; + }; +}; diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi index 6cc5980e2fa1..0708771c193d 100644 --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi @@ -5,7 +5,7 @@ #include -#include "eyeq5-fixed-clocks.dtsi" +#include "eyeq5-clocks.dtsi" / { #address-cells = <2>; @@ -78,6 +78,9 @@ uart0: serial@800000 { interrupts = ; clocks = <&uart_clk>, <&occ_periph>; clock-names = "uartclk", "apb_pclk"; + resets = <&olb 0 10>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; }; uart1: serial@900000 { @@ -88,6 +91,9 @@ uart1: serial@900000 { interrupts = ; clocks = <&uart_clk>, <&occ_periph>; clock-names = "uartclk", "apb_pclk"; + resets = <&olb 0 11>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; }; uart2: serial@a00000 { @@ -98,6 +104,18 @@ uart2: serial@a00000 { interrupts = ; clocks = <&uart_clk>, <&occ_periph>; clock-names = "uartclk", "apb_pclk"; + resets = <&olb 0 12>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + }; + + olb: system-controller@e00000 { + compatible = "mobileye,eyeq5-olb", "syscon"; + reg = <0 0xe00000 0x0 0x400>; + #reset-cells = <2>; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "ref"; }; gic: interrupt-controller@140000 { @@ -122,3 +140,5 @@ timer { }; }; }; + +#include "eyeq5-pins.dtsi"