From patchwork Wed Oct 23 10:58:40 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Th=C3=A9o_Lebrun?= X-Patchwork-Id: 13846912 Received: from relay6-d.mail.gandi.net (relay6-d.mail.gandi.net [217.70.183.198]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 01EEC1BDDF; Wed, 23 Oct 2024 10:58:43 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.198 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1729681128; cv=none; b=riPca0alMoujDFhbnVLbsWTGHWAJSBE9udvinGZ03kyVzAx4+Q/4lrtpVZV5LeSR7y3KpNmmyjAdQshEFJMo9WPSxDbcNVM9L2opPuQFfik54mZn4u32nz7aPLgQCLb/uhwRkCN2W1DdHPRf8fnpyvJT8g/Inkpmm9TBAmXeup8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1729681128; c=relaxed/simple; bh=pPuOEjOHe8lzIg4eHrbntpXWv0FCl5pnjQLU5gDm+ms=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:To:Cc; b=cyvATWI3YGZLRWBajzeAaPmCmjifq6ZQtvi5AxD2rVwgtiL4QFokU6/OXny4K0nhf2lU+vJTnrVed/xZfi0pPDFM0yNpVnaxTHLz7UZdFx4/JqBSpvFBJL/8ODiJ6ghiQThXbBuqrpzb49gKs3TK18RkT0i0KOuAcnUO01kPaJM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=ern+YAld; arc=none smtp.client-ip=217.70.183.198 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="ern+YAld" Received: by mail.gandi.net (Postfix) with ESMTPSA id A54C2C0007; Wed, 23 Oct 2024 10:58:41 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1729681122; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding; bh=THveO6vB81J7TU28NsJD/virQmBGq+kpoX5lce/m3Os=; b=ern+YAldDi6eFy3Wd6SvYDSvG2wYoAD15j7iFcmQ7Mo5X61wI0KM0lDYFcxj0w0Vus5Nth hYmWTd8sCMLyG0Rqo+f+F1yrAP6kQJOOei6SY1o/vBcFdVEC9WkuxDwGLu9mzRM/KkvVzI mRd4aawRYwOlkwIjwcjvg5XlkK4WSq5XGlC9gsEDs616lbNc/ONp2VIkwDfEINu4EVw5Og M1i3zhFrs0Aex25K1jeef5hpa2SvlLU4+nmOz/TZfAByXX9BSJS+WgrNrqIOkv1C3ZXbqJ gaiBP+3N0J3gGWOd0yoMWylRRwa4Sn/P16UpPkV6t94TOnPR5yqr30eC5m1a0g== From: =?utf-8?q?Th=C3=A9o_Lebrun?= Date: Wed, 23 Oct 2024 12:58:40 +0200 Subject: [PATCH v6] clk: eyeq: add driver Precedence: bulk X-Mailing-List: linux-mips@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20241023-mbly-clk-v6-1-ca83e43daf93@bootlin.com> X-B4-Tracking: v=1; b=H4sIAN/WGGcC/23PTW7CMBAF4Ksgr+vKHjv+YcU9KhbxZFyshhglK CpCuTsOi2KULt9ovjeaO5toTDSx/e7ORprTlPJQgvnYMTy1wzfx1JXMQIAWBhw/h/7Gsf/hGg0 FtNIobVlZv4wU0++z6utY8ilN1zzens2zXKf/lMySC05dkASeWo3yEHK+9mn4xHxma80ML2qFq igUGsmhkd63jfVbqmpaX1UrVbGVROAidVuq/6gUQldUF4oWEEhpRzJuaVNTW9Fm/dV3znsNxmN 4p8uyPABILjXfjgEAAA== X-Change-ID: 20240628-mbly-clk-4c6ebc716347 To: Stephen Boyd , Michael Turquette Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, linux-mips@vger.kernel.org, Vladimir Kondratiev , =?utf-8?q?Gr=C3=A9?= =?utf-8?q?gory_Clement?= , Thomas Petazzoni , Tawfik Bayouk , =?utf-8?q?Th=C3=A9o_Lebrun?= X-Mailer: b4 0.14.2 X-GND-Sasl: theo.lebrun@bootlin.com Add Mobileye EyeQ5, EyeQ6L and EyeQ6H clock controller driver. It is both a platform driver and a hook onto of_clk_init() used for clocks required early (GIC timer, UARTs). For some compatible, it is both at the same time. eqc_early_init() initialises early PLLs and exposes its own clock provider. It marks other clocks as deferred. eqc_probe() adds all remaining clocks using another clock provider. It exposes read-only PLLs derived from the main crystal on board. It also exposes another type of clocks: divider clocks. They always have even divisors and have one PLL as parent. This driver also bears the responsability for optional reset and pinctrl auxiliary devices. The match data attached to the devicetree node compatible indicate if such devices should be created. They all get passed a pointer to the start of the OLB region. Signed-off-by: Théo Lebrun --- This series adds a platform driver dealing with read-only PLLs derived from the main crystal, and some divider clocks based on those PLLs. It also acts at the one instantiating reset and pinctrl auxiliary devices. One special feature is that some clocks are required before platform bus infrastructure is available; we therefore register some clocks at of_clk_init() stage. We support EyeQ5, EyeQ6L and EyeQ6H SoCs. The last one is special in that there are seven instances of this system-controller. All of those handle clocks. The clock driver instantiates reset and pinctrl auxiliary devices present in the same system controller. Those drivers are upstream already, as well as the devicetree patches to switch from static clocks to using this driver: - 487b1b32e317 ("reset: eyeq: add platform driver") since v6.12-rc1 - 41795aa1f56a ("pinctrl: eyeq5: add platform driver") since v6.12-rc1 - bde4b22dc526 ("dt-bindings: soc: mobileye: add EyeQ OLB system controller") since v6.11-rc1 This revision mainly simplifies code. We switch from a single clock provider used by both of_clk_init() and platform device to two separate clock providers. Have a nice day, Thanks, Théo [0]: https://lore.kernel.org/lkml/D4ELMFAUQYZ7.3LXGQZJSX68UF@bootlin.com/ --- Changes in v6: - Rebase onto clk-next. Drop three applied patches (and drop To/Cc): Revert "dt-bindings: clock: mobileye,eyeq5-clk: add bindings" dt-bindings: clock: add Mobileye EyeQ6L/EyeQ6H clock indexes clk: divider: Introduce CLK_DIVIDER_EVEN_INTEGERS flag - Kconfig: - Drop "depends on 64BIT" which breaks Stephen's testing scripts. - driver: - Use one clock provider at of_clk_init() stage and one at platform device stage. Implications: - Avoid sharing from early init to probe the cells array and the memory mappings using a static linked list. - No need for `struct eqc_priv`, remove it. - A divider parent clk might not be in the current clk provider. If it is not, we use struct clk_parent_data::index to reference it; see eqc_probe_init_divs(). - Early code must know the total number of clocks, to properly return EPROBE_DEFER. We put that info in early match data. - Add #include , see Kconfig change. - Add missing #include . - Drop __initconst from match data used at probe; probe might be called after init memory is freed. - Remove unused EQC_MAX_DIV_COUNT constant. - Link to v5: https://lore.kernel.org/r/20241007-mbly-clk-v5-0-e9d8994269cb@bootlin.com Changes in v5: - Set `.suppress_bind_attrs = true`. - Replace devm_platform_ioremap_resource() by platform_get_resource() + ioremap(). - Use non-devres version of devm_kzalloc(). - Use non-devres version of devm_of_clk_add_hw_provider(). - Remove the eqc_auxdev_unregister() devres action. - Link to v4: https://lore.kernel.org/r/20241004-mbly-clk-v4-0-c72c2e348e1f@bootlin.com Changes in v4: - clk-divider: - Switch flags function arguments from u16 to unsigned long. - clk-eyeq Kconfig: - Remove OF dependency that is not required. - clk-eyeq driver: - eqc_pll_parse_registers(): - Make clk accuracy computation more explicit using a comment. - Early return when not spread spectrum, to deindent code. - Rename eqc_init() to eqc_early_init(). - Remove the early match table. Register a different function in each CLK_OF_DECLARE_DRIVER(), which calls eqc_early_init() with an additional match data argument. - Add __initconst to early match data structs. - Remove spinlock on static linked list. - Link to v3: https://lore.kernel.org/r/20240708-mbly-clk-v3-0-f3fa1ee28fed@bootlin.com Changes in v3: - Kconfig: add "depends on 64BIT" because we use readq(). This removes the ability to COMPILE_TEST the driver on 32bit, which is fine as this is a SoC clk platform driver used on 64bit SoCs. - driver: avoid `of_match_node(...)->data` because, if !CONFIG_OF, of_match_node(...) is resolved by the preprocessor to NULL. There is still a warning "eqc_early_match_table declared but unused" if !CONFIG_OF. We fix the header in a separate patch: https://lore.kernel.org/lkml/20240708-of-match-node-v1-1-90aaa7c2d21d@bootlin.com/ - Link to v2: see [1] Changes in v2: - bindings: take Acked-by: Krzysztof Kozlowski. - driver: eqc_auxdev_create(): cast the `void __iomem *base` variable to (void __force *) before putting it in platform_data, to avoid sparse warning. - Link to v1: see [1] Changes since OLB v3 [0]: - MAINTAINERS: Move changes into a separate commit to avoid merge conflicts. This commit is in the MIPS series [3]. - dt-bindings: split include/dt-bindings/ changes into its own commit. It is part of this clk series. - dt-bindings: Take Reviewed-by: Rob Herring. The include/dt-bindings/ new commit has NOT inherited from it, just to make sure. --- drivers/clk/Kconfig | 11 + drivers/clk/Makefile | 1 + drivers/clk/clk-eyeq.c | 695 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 707 insertions(+) --- base-commit: d635691d84616cfe3a3419ec01cfc2c9277a0b46 change-id: 20240628-mbly-clk-4c6ebc716347 Best regards, diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 89fc6708f6d67f9d15ecaec073e06b061f81248d..ef709327cba1c7db89d44d847b293890c70c6c57 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -226,6 +226,17 @@ config COMMON_CLK_EP93XX help This driver supports the SoC clocks on the Cirrus Logic ep93xx. +config COMMON_CLK_EYEQ + bool "Clock driver for the Mobileye EyeQ platform" + depends on MACH_EYEQ5 || MACH_EYEQ6H || COMPILE_TEST + select AUXILIARY_BUS + default MACH_EYEQ5 || MACH_EYEQ6H + help + This driver provides clocks found on Mobileye EyeQ5, EyeQ6L and Eye6H + SoCs. Controllers live in shared register regions called OLB. Driver + provides read-only PLLs, derived from the main crystal clock (which + must be constant). It also exposes some divider clocks. + config COMMON_CLK_FSL_FLEXSPI tristate "Clock driver for FlexSPI on Layerscape SoCs" depends on ARCH_LAYERSCAPE || COMPILE_TEST diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 01d664838a9ff659f013d94fe5b345d4bd379f43..bf4bd45adc3a0ed8c9dc699c76f303dc91b524c4 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o obj-$(CONFIG_COMMON_CLK_EP93XX) += clk-ep93xx.o obj-$(CONFIG_ARCH_SPARX5) += clk-sparx5.o obj-$(CONFIG_COMMON_CLK_EN7523) += clk-en7523.o +obj-$(CONFIG_COMMON_CLK_EYEQ) += clk-eyeq.o obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI) += clk-fsl-flexspi.o obj-$(CONFIG_COMMON_CLK_FSL_SAI) += clk-fsl-sai.o diff --git a/drivers/clk/clk-eyeq.c b/drivers/clk/clk-eyeq.c new file mode 100644 index 0000000000000000000000000000000000000000..77f1afb020a0247b9d73b59a88845b21a0d83b5e --- /dev/null +++ b/drivers/clk/clk-eyeq.c @@ -0,0 +1,695 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PLL clock driver for the Mobileye EyeQ5, EyeQ6L and EyeQ6H platforms. + * + * This controller handles read-only PLLs, all derived from the same main + * crystal clock. It also exposes divider clocks, those are children to PLLs. + * Parent clock is expected to be constant. This driver's registers live in + * a shared region called OLB. Some PLLs are initialised early by of_clk_init(); + * if so, two clk providers are registered. + * + * We use eqc_ as prefix, as-in "EyeQ Clock", but way shorter. + * + * Copyright (C) 2024 Mobileye Vision Technologies Ltd. + */ + +/* + * Set pr_fmt() for printing from eqc_early_init(). + * It is called at of_clk_init() stage (read: really early). + */ +#define pr_fmt(fmt) "clk-eyeq: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* In frac mode, it enables fractional noise canceling DAC. Else, no function. */ +#define PCSR0_DAC_EN BIT(0) +/* Fractional or integer mode */ +#define PCSR0_DSM_EN BIT(1) +#define PCSR0_PLL_EN BIT(2) +/* All clocks output held at 0 */ +#define PCSR0_FOUTPOSTDIV_EN BIT(3) +#define PCSR0_POST_DIV1 GENMASK(6, 4) +#define PCSR0_POST_DIV2 GENMASK(9, 7) +#define PCSR0_REF_DIV GENMASK(15, 10) +#define PCSR0_INTIN GENMASK(27, 16) +#define PCSR0_BYPASS BIT(28) +/* Bits 30..29 are reserved */ +#define PCSR0_PLL_LOCKED BIT(31) + +#define PCSR1_RESET BIT(0) +#define PCSR1_SSGC_DIV GENMASK(4, 1) +/* Spread amplitude (% = 0.1 * SPREAD[4:0]) */ +#define PCSR1_SPREAD GENMASK(9, 5) +#define PCSR1_DIS_SSCG BIT(10) +/* Down-spread or center-spread */ +#define PCSR1_DOWN_SPREAD BIT(11) +#define PCSR1_FRAC_IN GENMASK(31, 12) + +struct eqc_pll { + unsigned int index; + const char *name; + unsigned int reg64; +}; + +/* + * Divider clock. Divider is 2*(v+1), with v the register value. + * Min divider is 2, max is 2*(2^width). + */ +struct eqc_div { + unsigned int index; + const char *name; + unsigned int parent; + unsigned int reg; + u8 shift; + u8 width; +}; + +struct eqc_match_data { + unsigned int pll_count; + const struct eqc_pll *plls; + + unsigned int div_count; + const struct eqc_div *divs; + + const char *reset_auxdev_name; + const char *pinctrl_auxdev_name; + + unsigned int early_clk_count; +}; + +struct eqc_early_match_data { + unsigned int early_pll_count; + const struct eqc_pll *early_plls; + + /* + * We want our of_xlate callback to EPROBE_DEFER instead of dev_err() + * and EINVAL. For that, we must know the total clock count. + */ + unsigned int late_clk_count; +}; + +/* + * Both factors (mult and div) must fit in 32 bits. When an operation overflows, + * this function throws away low bits so that factors still fit in 32 bits. + * + * Precision loss depends on amplitude of mult and div. Worst theorical + * loss is: (UINT_MAX+1) / UINT_MAX - 1 = 2.3e-10. + * This is 1Hz every 4.3GHz. + */ +static void eqc_pll_downshift_factors(unsigned long *mult, unsigned long *div) +{ + unsigned long biggest; + unsigned int shift; + + /* This function can be removed if mult/div switch to unsigned long. */ + static_assert(sizeof_field(struct clk_fixed_factor, mult) == sizeof(unsigned int)); + static_assert(sizeof_field(struct clk_fixed_factor, div) == sizeof(unsigned int)); + + /* No overflow, nothing to be done. */ + if (*mult <= UINT_MAX && *div <= UINT_MAX) + return; + + /* + * Compute the shift required to bring the biggest factor into unsigned + * int range. That is, shift its highest set bit to the unsigned int + * most significant bit. + */ + biggest = max(*mult, *div); + shift = __fls(biggest) - (BITS_PER_BYTE * sizeof(unsigned int)) + 1; + + *mult >>= shift; + *div >>= shift; +} + +static int eqc_pll_parse_registers(u32 r0, u32 r1, unsigned long *mult, + unsigned long *div, unsigned long *acc) +{ + u32 spread; + + if (r0 & PCSR0_BYPASS) { + *mult = 1; + *div = 1; + *acc = 0; + return 0; + } + + if (!(r0 & PCSR0_PLL_LOCKED)) + return -EINVAL; + + *mult = FIELD_GET(PCSR0_INTIN, r0); + *div = FIELD_GET(PCSR0_REF_DIV, r0); + if (r0 & PCSR0_FOUTPOSTDIV_EN) + *div *= FIELD_GET(PCSR0_POST_DIV1, r0) * FIELD_GET(PCSR0_POST_DIV2, r0); + + /* Fractional mode, in 2^20 (0x100000) parts. */ + if (r0 & PCSR0_DSM_EN) { + *div *= (1ULL << 20); + *mult = *mult * (1ULL << 20) + FIELD_GET(PCSR1_FRAC_IN, r1); + } + + if (!*mult || !*div) + return -EINVAL; + + if (r1 & (PCSR1_RESET | PCSR1_DIS_SSCG)) { + *acc = 0; + return 0; + } + + /* + * Spread spectrum. + * + * Spread is 1/1000 parts of frequency, accuracy is half of + * that. To get accuracy, convert to ppb (parts per billion). + * + * acc = spread * 1e6 / 2 + * with acc in parts per billion and, + * spread in parts per thousand. + */ + spread = FIELD_GET(PCSR1_SPREAD, r1); + *acc = spread * 500000; + + if (r1 & PCSR1_DOWN_SPREAD) { + /* + * Downspreading: the central frequency is half a + * spread lower. + */ + *mult *= 2000 - spread; + *div *= 2000; + + /* + * Previous operation might overflow 32 bits. If it + * does, throw away the least amount of low bits. + */ + eqc_pll_downshift_factors(mult, div); + } + + return 0; +} + +static void eqc_probe_init_plls(struct device *dev, const struct eqc_match_data *data, + void __iomem *base, struct clk_hw_onecell_data *cells) +{ + unsigned long mult, div, acc; + const struct eqc_pll *pll; + struct clk_hw *hw; + unsigned int i; + u32 r0, r1; + u64 val; + int ret; + + for (i = 0; i < data->pll_count; i++) { + pll = &data->plls[i]; + + val = readq(base + pll->reg64); + r0 = val; + r1 = val >> 32; + + ret = eqc_pll_parse_registers(r0, r1, &mult, &div, &acc); + if (ret) { + dev_warn(dev, "failed parsing state of %s\n", pll->name); + cells->hws[pll->index] = ERR_PTR(ret); + continue; + } + + hw = clk_hw_register_fixed_factor_with_accuracy_fwname(dev, + dev->of_node, pll->name, "ref", 0, mult, div, acc); + cells->hws[pll->index] = hw; + if (IS_ERR(hw)) + dev_warn(dev, "failed registering %s: %pe\n", pll->name, hw); + } +} + +static void eqc_probe_init_divs(struct device *dev, const struct eqc_match_data *data, + void __iomem *base, struct clk_hw_onecell_data *cells) +{ + struct clk_parent_data parent_data = { }; + const struct eqc_div *div; + struct clk_hw *parent; + void __iomem *reg; + struct clk_hw *hw; + unsigned int i; + + for (i = 0; i < data->div_count; i++) { + div = &data->divs[i]; + reg = base + div->reg; + parent = cells->hws[div->parent]; + + if (IS_ERR(parent)) { + /* Parent is in early clk provider. */ + parent_data.index = div->parent; + parent_data.hw = NULL; + } else { + /* Avoid clock lookup when we already have the hw reference. */ + parent_data.index = 0; + parent_data.hw = parent; + } + + hw = clk_hw_register_divider_table_parent_data(dev, div->name, + &parent_data, 0, reg, div->shift, div->width, + CLK_DIVIDER_EVEN_INTEGERS, NULL, NULL); + cells->hws[div->index] = hw; + if (IS_ERR(hw)) + dev_warn(dev, "failed registering %s: %pe\n", + div->name, hw); + } +} + +static void eqc_auxdev_release(struct device *dev) +{ + struct auxiliary_device *adev = to_auxiliary_dev(dev); + + kfree(adev); +} + +static int eqc_auxdev_create(struct device *dev, void __iomem *base, + const char *name, u32 id) +{ + struct auxiliary_device *adev; + int ret; + + adev = kzalloc(sizeof(*adev), GFP_KERNEL); + if (!adev) + return -ENOMEM; + + adev->name = name; + adev->dev.parent = dev; + adev->dev.platform_data = (void __force *)base; + adev->dev.release = eqc_auxdev_release; + adev->id = id; + + ret = auxiliary_device_init(adev); + if (ret) + return ret; + + ret = auxiliary_device_add(adev); + if (ret) + auxiliary_device_uninit(adev); + + return ret; +} + +static int eqc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + const struct eqc_match_data *data; + struct clk_hw_onecell_data *cells; + unsigned int i, clk_count; + struct resource *res; + void __iomem *base; + int ret; + + data = device_get_match_data(dev); + if (!data) + return 0; /* No clocks nor auxdevs, we are done. */ + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + base = ioremap(res->start, resource_size(res)); + if (!base) + return -ENOMEM; + + /* Init optional reset auxiliary device. */ + if (data->reset_auxdev_name) { + ret = eqc_auxdev_create(dev, base, data->reset_auxdev_name, 0); + if (ret) + dev_warn(dev, "failed creating auxiliary device %s.%s: %d\n", + KBUILD_MODNAME, data->reset_auxdev_name, ret); + } + + /* Init optional pinctrl auxiliary device. */ + if (data->pinctrl_auxdev_name) { + ret = eqc_auxdev_create(dev, base, data->pinctrl_auxdev_name, 0); + if (ret) + dev_warn(dev, "failed creating auxiliary device %s.%s: %d\n", + KBUILD_MODNAME, data->pinctrl_auxdev_name, ret); + } + + if (data->pll_count + data->div_count == 0) + return 0; /* Zero clocks, we are done. */ + + clk_count = data->pll_count + data->div_count + data->early_clk_count; + cells = kzalloc(struct_size(cells, hws, clk_count), GFP_KERNEL); + if (!cells) + return -ENOMEM; + + cells->num = clk_count; + + /* Early PLLs are marked as errors: the early provider will get queried. */ + for (i = 0; i < clk_count; i++) + cells->hws[i] = ERR_PTR(-EINVAL); + + eqc_probe_init_plls(dev, data, base, cells); + + eqc_probe_init_divs(dev, data, base, cells); + + /* When providing a single clock, require no cell. */ + if (clk_count == 1) + return of_clk_add_hw_provider(np, of_clk_hw_simple_get, cells->hws[0]); + else + return of_clk_add_hw_provider(np, of_clk_hw_onecell_get, cells); +} + +/* Required early for GIC timer (pll-cpu) and UARTs (pll-per). */ +static const struct eqc_pll eqc_eyeq5_early_plls[] = { + { .index = EQ5C_PLL_CPU, .name = "pll-cpu", .reg64 = 0x02C }, + { .index = EQ5C_PLL_PER, .name = "pll-per", .reg64 = 0x05C }, +}; + +static const struct eqc_pll eqc_eyeq5_plls[] = { + { .index = EQ5C_PLL_VMP, .name = "pll-vmp", .reg64 = 0x034 }, + { .index = EQ5C_PLL_PMA, .name = "pll-pma", .reg64 = 0x03C }, + { .index = EQ5C_PLL_VDI, .name = "pll-vdi", .reg64 = 0x044 }, + { .index = EQ5C_PLL_DDR0, .name = "pll-ddr0", .reg64 = 0x04C }, + { .index = EQ5C_PLL_PCI, .name = "pll-pci", .reg64 = 0x054 }, + { .index = EQ5C_PLL_PMAC, .name = "pll-pmac", .reg64 = 0x064 }, + { .index = EQ5C_PLL_MPC, .name = "pll-mpc", .reg64 = 0x06C }, + { .index = EQ5C_PLL_DDR1, .name = "pll-ddr1", .reg64 = 0x074 }, +}; + +static const struct eqc_div eqc_eyeq5_divs[] = { + { + .index = EQ5C_DIV_OSPI, + .name = "div-ospi", + .parent = EQ5C_PLL_PER, + .reg = 0x11C, + .shift = 0, + .width = 4, + }, +}; + +static const struct eqc_early_match_data eqc_eyeq5_early_match_data __initconst = { + .early_pll_count = ARRAY_SIZE(eqc_eyeq5_early_plls), + .early_plls = eqc_eyeq5_early_plls, + + .late_clk_count = ARRAY_SIZE(eqc_eyeq5_plls) + ARRAY_SIZE(eqc_eyeq5_divs), +}; + +static const struct eqc_match_data eqc_eyeq5_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq5_plls), + .plls = eqc_eyeq5_plls, + + .div_count = ARRAY_SIZE(eqc_eyeq5_divs), + .divs = eqc_eyeq5_divs, + + .reset_auxdev_name = "reset", + .pinctrl_auxdev_name = "pinctrl", + + .early_clk_count = ARRAY_SIZE(eqc_eyeq5_early_plls), +}; + +static const struct eqc_pll eqc_eyeq6l_plls[] = { + { .index = EQ6LC_PLL_DDR, .name = "pll-ddr", .reg64 = 0x02C }, + { .index = EQ6LC_PLL_CPU, .name = "pll-cpu", .reg64 = 0x034 }, /* also acc */ + { .index = EQ6LC_PLL_PER, .name = "pll-per", .reg64 = 0x03C }, + { .index = EQ6LC_PLL_VDI, .name = "pll-vdi", .reg64 = 0x044 }, +}; + +static const struct eqc_match_data eqc_eyeq6l_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq6l_plls), + .plls = eqc_eyeq6l_plls, + + .reset_auxdev_name = "reset", +}; + +static const struct eqc_match_data eqc_eyeq6h_west_match_data = { + .reset_auxdev_name = "reset_west", +}; + +static const struct eqc_pll eqc_eyeq6h_east_plls[] = { + { .index = 0, .name = "pll-east", .reg64 = 0x074 }, +}; + +static const struct eqc_match_data eqc_eyeq6h_east_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq6h_east_plls), + .plls = eqc_eyeq6h_east_plls, + + .reset_auxdev_name = "reset_east", +}; + +static const struct eqc_pll eqc_eyeq6h_south_plls[] = { + { .index = EQ6HC_SOUTH_PLL_VDI, .name = "pll-vdi", .reg64 = 0x000 }, + { .index = EQ6HC_SOUTH_PLL_PCIE, .name = "pll-pcie", .reg64 = 0x008 }, + { .index = EQ6HC_SOUTH_PLL_PER, .name = "pll-per", .reg64 = 0x010 }, + { .index = EQ6HC_SOUTH_PLL_ISP, .name = "pll-isp", .reg64 = 0x018 }, +}; + +static const struct eqc_div eqc_eyeq6h_south_divs[] = { + { + .index = EQ6HC_SOUTH_DIV_EMMC, + .name = "div-emmc", + .parent = EQ6HC_SOUTH_PLL_PER, + .reg = 0x070, + .shift = 4, + .width = 4, + }, + { + .index = EQ6HC_SOUTH_DIV_OSPI_REF, + .name = "div-ospi-ref", + .parent = EQ6HC_SOUTH_PLL_PER, + .reg = 0x090, + .shift = 4, + .width = 4, + }, + { + .index = EQ6HC_SOUTH_DIV_OSPI_SYS, + .name = "div-ospi-sys", + .parent = EQ6HC_SOUTH_PLL_PER, + .reg = 0x090, + .shift = 8, + .width = 1, + }, + { + .index = EQ6HC_SOUTH_DIV_TSU, + .name = "div-tsu", + .parent = EQ6HC_SOUTH_PLL_PCIE, + .reg = 0x098, + .shift = 4, + .width = 8, + }, +}; + +static const struct eqc_match_data eqc_eyeq6h_south_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq6h_south_plls), + .plls = eqc_eyeq6h_south_plls, + + .div_count = ARRAY_SIZE(eqc_eyeq6h_south_divs), + .divs = eqc_eyeq6h_south_divs, +}; + +static const struct eqc_pll eqc_eyeq6h_ddr0_plls[] = { + { .index = 0, .name = "pll-ddr0", .reg64 = 0x074 }, +}; + +static const struct eqc_match_data eqc_eyeq6h_ddr0_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq6h_ddr0_plls), + .plls = eqc_eyeq6h_ddr0_plls, +}; + +static const struct eqc_pll eqc_eyeq6h_ddr1_plls[] = { + { .index = 0, .name = "pll-ddr1", .reg64 = 0x074 }, +}; + +static const struct eqc_match_data eqc_eyeq6h_ddr1_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq6h_ddr1_plls), + .plls = eqc_eyeq6h_ddr1_plls, +}; + +static const struct eqc_pll eqc_eyeq6h_acc_plls[] = { + { .index = EQ6HC_ACC_PLL_XNN, .name = "pll-xnn", .reg64 = 0x040 }, + { .index = EQ6HC_ACC_PLL_VMP, .name = "pll-vmp", .reg64 = 0x050 }, + { .index = EQ6HC_ACC_PLL_PMA, .name = "pll-pma", .reg64 = 0x05C }, + { .index = EQ6HC_ACC_PLL_MPC, .name = "pll-mpc", .reg64 = 0x068 }, + { .index = EQ6HC_ACC_PLL_NOC, .name = "pll-noc", .reg64 = 0x070 }, +}; + +static const struct eqc_match_data eqc_eyeq6h_acc_match_data = { + .pll_count = ARRAY_SIZE(eqc_eyeq6h_acc_plls), + .plls = eqc_eyeq6h_acc_plls, + + .reset_auxdev_name = "reset_acc", +}; + +static const struct of_device_id eqc_match_table[] = { + { .compatible = "mobileye,eyeq5-olb", .data = &eqc_eyeq5_match_data }, + { .compatible = "mobileye,eyeq6l-olb", .data = &eqc_eyeq6l_match_data }, + { .compatible = "mobileye,eyeq6h-west-olb", .data = &eqc_eyeq6h_west_match_data }, + { .compatible = "mobileye,eyeq6h-east-olb", .data = &eqc_eyeq6h_east_match_data }, + { .compatible = "mobileye,eyeq6h-south-olb", .data = &eqc_eyeq6h_south_match_data }, + { .compatible = "mobileye,eyeq6h-ddr0-olb", .data = &eqc_eyeq6h_ddr0_match_data }, + { .compatible = "mobileye,eyeq6h-ddr1-olb", .data = &eqc_eyeq6h_ddr1_match_data }, + { .compatible = "mobileye,eyeq6h-acc-olb", .data = &eqc_eyeq6h_acc_match_data }, + {} +}; + +static struct platform_driver eqc_driver = { + .probe = eqc_probe, + .driver = { + .name = "clk-eyeq", + .of_match_table = eqc_match_table, + .suppress_bind_attrs = true, + }, +}; +builtin_platform_driver(eqc_driver); + +/* Required early for GIC timer. */ +static const struct eqc_pll eqc_eyeq6h_central_early_plls[] = { + { .index = 0, .name = "pll-cpu", .reg64 = 0x02C }, +}; + +static const struct eqc_early_match_data eqc_eyeq6h_central_early_match_data __initconst = { + .early_pll_count = ARRAY_SIZE(eqc_eyeq6h_central_early_plls), + .early_plls = eqc_eyeq6h_central_early_plls, +}; + +/* Required early for UART. */ +static const struct eqc_pll eqc_eyeq6h_west_early_plls[] = { + { .index = 0, .name = "pll-west", .reg64 = 0x074 }, +}; + +static const struct eqc_early_match_data eqc_eyeq6h_west_early_match_data __initconst = { + .early_pll_count = ARRAY_SIZE(eqc_eyeq6h_west_early_plls), + .early_plls = eqc_eyeq6h_west_early_plls, +}; + +static void __init eqc_early_init(struct device_node *np, + const struct eqc_early_match_data *early_data) +{ + struct clk_hw_onecell_data *cells; + unsigned int i, clk_count; + void __iomem *base; + int ret; + + clk_count = early_data->early_pll_count + early_data->late_clk_count; + cells = kzalloc(struct_size(cells, hws, clk_count), GFP_KERNEL); + if (!cells) { + ret = -ENOMEM; + goto err; + } + + cells->num = clk_count; + + /* + * Mark all clocks as deferred; some are registered here, the rest at + * platform device probe. + * + * Once the platform device is probed, its provider will take priority + * when looking up clocks. + */ + for (i = 0; i < clk_count; i++) + cells->hws[i] = ERR_PTR(-EPROBE_DEFER); + + /* Offsets (reg64) of early PLLs are relative to OLB block. */ + base = of_iomap(np, 0); + if (!base) { + ret = -ENODEV; + goto err; + } + + for (i = 0; i < early_data->early_pll_count; i++) { + const struct eqc_pll *pll = &early_data->early_plls[i]; + unsigned long mult, div, acc; + struct clk_hw *hw; + u32 r0, r1; + u64 val; + + val = readq(base + pll->reg64); + r0 = val; + r1 = val >> 32; + + ret = eqc_pll_parse_registers(r0, r1, &mult, &div, &acc); + if (ret) { + pr_err("failed parsing state of %s\n", pll->name); + goto err; + } + + hw = clk_hw_register_fixed_factor_with_accuracy_fwname(NULL, + np, pll->name, "ref", 0, mult, div, acc); + cells->hws[pll->index] = hw; + if (IS_ERR(hw)) { + pr_err("failed registering %s: %pe\n", pll->name, hw); + ret = PTR_ERR(hw); + goto err; + } + } + + /* When providing a single clock, require no cell. */ + if (clk_count == 1) + ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, cells->hws[0]); + else + ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, cells); + if (ret) { + pr_err("failed registering clk provider: %d\n", ret); + goto err; + } + + return; + +err: + /* + * We are doomed. The system will not be able to boot. + * + * Let's still try to be good citizens by freeing resources and print + * a last error message that might help debugging. + */ + + pr_err("failed clk init: %d\n", ret); + + if (cells) { + of_clk_del_provider(np); + + for (i = 0; i < early_data->early_pll_count; i++) { + const struct eqc_pll *pll = &early_data->early_plls[i]; + struct clk_hw *hw = cells->hws[pll->index]; + + if (!IS_ERR_OR_NULL(hw)) + clk_hw_unregister_fixed_factor(hw); + } + + kfree(cells); + } +} + +static void __init eqc_eyeq5_early_init(struct device_node *np) +{ + eqc_early_init(np, &eqc_eyeq5_early_match_data); +} +CLK_OF_DECLARE_DRIVER(eqc_eyeq5, "mobileye,eyeq5-olb", eqc_eyeq5_early_init); + +static void __init eqc_eyeq6h_central_early_init(struct device_node *np) +{ + eqc_early_init(np, &eqc_eyeq6h_central_early_match_data); +} +CLK_OF_DECLARE_DRIVER(eqc_eyeq6h_central, "mobileye,eyeq6h-central-olb", + eqc_eyeq6h_central_early_init); + +static void __init eqc_eyeq6h_west_early_init(struct device_node *np) +{ + eqc_early_init(np, &eqc_eyeq6h_west_early_match_data); +} +CLK_OF_DECLARE_DRIVER(eqc_eyeq6h_west, "mobileye,eyeq6h-west-olb", + eqc_eyeq6h_west_early_init);