[11/13] clk: eyeq: add EyeQ6H west fixed factor clocks

Commit Message

Théo Lebrun Oct. 31, 2024, 3:53 p.m. UTC

Previous setup was:
 - pll-west clock registered from driver at of_clk_init();
 - Both OCC and UART clocks registered from DT using fixed-factor-clock
   compatible.

Now that drivers/clk/clk-eyeq.c supports registering fixed factors, use
that capability to register west-per-occ and west-per-uart (giving them
proper names at the same time).

Also switch from hard-coded index 0 for pll-west to using the
EQ6HC_WEST_PLL_PER constant by exposed dt-bindings headers.

All get exposed at of_clk_init() because they get used by the AMBA PL011
serial ports. Those are instantiated before platform bus infrastructure.

Signed-off-by: Théo Lebrun <[e-mail]>
---
 drivers/clk/clk-eyeq.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

Patch

diff --git a/drivers/clk/clk-eyeq.c b/drivers/clk/clk-eyeq.c
index 4f6aa852038cfc4db0fc4473cf5e50c6c254b9ee..f3ef4293b97bd553fbfd74b8dac4811772729458 100644
--- a/drivers/clk/clk-eyeq.c
+++ b/drivers/clk/clk-eyeq.c
@@ -708,12 +708,20 @@  static const struct eqc_early_match_data eqc_eyeq6h_central_early_match_data __i
 
 /* Required early for UART. */
 static const struct eqc_pll eqc_eyeq6h_west_early_plls[] = {
-	{ .index = 0, .name = "pll-west", .reg64 = 0x074 },
+	{ .index = EQ6HC_WEST_PLL_PER, .name = "pll-west", .reg64 = 0x074 },
+};
+
+static const struct eqc_fixed_factor eqc_eyeq6h_west_early_fixed_factors[] = {
+	{ EQ6HC_WEST_PER_OCC,  "west-per-occ",  1, 10, EQ6HC_WEST_PLL_PER },
+	{ EQ6HC_WEST_PER_UART, "west-per-uart", 1, 1,  EQ6HC_WEST_PER_OCC },
 };
 
 static const struct eqc_early_match_data eqc_eyeq6h_west_early_match_data __initconst = {
 	.early_pll_count	= ARRAY_SIZE(eqc_eyeq6h_west_early_plls),
 	.early_plls		= eqc_eyeq6h_west_early_plls,
+
+	.early_fixed_factor_count = ARRAY_SIZE(eqc_eyeq6h_west_early_fixed_factors),
+	.early_fixed_factors = eqc_eyeq6h_west_early_fixed_factors,
 };
 
 static void __init eqc_early_init(struct device_node *np,