| Message ID | 20241031200350.274945-6-chris.packham@alliedtelesis.co.nz (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | RTL9300 support for reboot and i2c | expand |
diff --git a/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts b/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts index 77d2566545f2..6789bf374044 100644 --- a/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts +++ b/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-or-later /dts-v1/; -#include "rtl930x.dtsi" +#include "rtl9302c.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> diff --git a/arch/mips/boot/dts/realtek/rtl9302c.dtsi b/arch/mips/boot/dts/realtek/rtl9302c.dtsi new file mode 100644 index 000000000000..ca4d347af8d3 --- /dev/null +++ b/arch/mips/boot/dts/realtek/rtl9302c.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause + +#include "rtl930x.dtsi" + +&switch0 { + compatible = "realtek,rtl9302c-switch", "syscon", "simple-mfd"; +}; diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi index f271940f82be..7477fae34987 100644 --- a/arch/mips/boot/dts/realtek/rtl930x.dtsi +++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi @@ -29,6 +29,19 @@ lx_clk: clock-175mhz { #clock-cells = <0>; clock-frequency = <175000000>; }; + + switch0: switch@1b000000 { + compatible = "realtek,rtl9301-switch", "syscon", "simple-mfd"; + reg = <0x1b000000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + reboot@c { + compatible = "syscon-reboot"; + reg = <0x0c 0x4>; + value = <0x01>; + }; + }; }; &soc {
The board level reset on systems using the RTL9302 can be driven via the switch. Use a syscon-reboot node to represent this. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- Notes: Changes in v8: - None Changes in v7: - None Changes in v6: - Drop wildcard compatible Changes in v5: - Krzysztof did technically give a r-by on v4 but given the changes to the rest of the series I haven't included it. - Use reg instead of offset - Add a rtl9302c.dtsi for the specific chip which pulls in the generic rtl930x.dtsi and updates a few of the compatibles on the way through. - Update Cameo board to use rtl9302c.dtsi Changes in v4: - None Changes in v3: - None Changes in v2: - drop redundant status = "okay" .../dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts | 2 +- arch/mips/boot/dts/realtek/rtl9302c.dtsi | 7 +++++++ arch/mips/boot/dts/realtek/rtl930x.dtsi | 13 +++++++++++++ 3 files changed, 21 insertions(+), 1 deletion(-) create mode 100644 arch/mips/boot/dts/realtek/rtl9302c.dtsi